messages from 2024-10-07 15:09:48 to 2024-10-10 03:29:28 UTC [more...]
[PATCH v8 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
2024-10-10 1:18 UTC (4+ messages)
[PATCH] drm: lcdif: Use adjusted_mode .clock instead of .crtc_clock
2024-10-10 0:38 UTC (12+ messages)
[PATCH net-next 00/11] add basic support for i.MX95 NETC
2024-10-10 3:25 UTC (27+ messages)
` [PATCH net-next 01/11] dt-bindings: net: add compatible string for i.MX95 EMDIO
` [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
` [PATCH net-next 03/11] dt-bindings: net: add bindings for NETC blocks control
` [PATCH net-next 04/11] net: enetc: add initial netc-blk-ctrl driver support
` [PATCH net-next 05/11] net: enetc: add enetc-pf-common "
` [PATCH net-next 06/11] net: enetc: only enable ERR050089 workaround on LS1028A
` [PATCH net-next 07/11] PCI: Add NXP NETC vendor ID and device IDs
` [PATCH net-next 08/11] net: enetc: add i.MX95 EMDIO support
` [PATCH net-next 09/11] net: enetc: optimize the allocation of tx_bdr
` [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
` [PATCH net-next 11/11] MAINTAINERS: update ENETC driver files and maintainers
[PATCH v3 0/4] fix the flexspi error on imx8ulp
2024-10-10 3:04 UTC (3+ messages)
` [PATCH v3 4/4] arm64: dts: imx8ulp: correct the flexspi compatible string
[PATCH net] net: fec: don't save PTP state if PTP is unsupported
2024-10-10 2:50 UTC (7+ messages)
[PATCH v5 0/4] Add dbi2 and atu for i.MX8M PCIe EP
2024-10-10 2:17 UTC (8+ messages)
` [PATCH v5 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
[PATCH v2 net-next 0/2] make PHY output RMII reference clock
2024-10-10 2:17 UTC (10+ messages)
` [PATCH v2 net-next 1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
` [PATCH v2 net-next 2/2] net: phy: c45-tja11xx: add support for outputing RMII reference clock
[PATCH 1/3] dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
2024-10-10 0:21 UTC (8+ messages)
` [PATCH 3/3] perf vendor events arm64: Add i.MX91 DDR Performance Monitor metrics
[PATCH 0/6] EDAC: fsl-ddr, add imx9 support
2024-10-09 19:22 UTC (7+ messages)
[PATCH 0/8] Add ITE IT6263 LVDS to HDMI converter support
2024-10-09 17:02 UTC (12+ messages)
` [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
` [PATCH 6/8] drm/bridge: "
[PATCH v2 0/5] Add RC-to-EP doorbell with platform MSI controller
2024-10-09 16:20 UTC (3+ messages)
[PATCH v2 0/3] pinctrl: s32: add missing pins and an S32G3 compatible
2024-10-09 16:17 UTC (4+ messages)
` [PATCH v2 1/3] pinctrl: s32: add missing pins definitions
[PATCH 1/2] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate
2024-10-09 15:43 UTC (6+ messages)
` [PATCH 2/2] drm: bridge: ldb: Configure LDB clock in .mode_set
[PATCH] drm/imx: add forward declarations for types
2024-10-09 15:30 UTC (3+ messages)
[PATCH 2/2] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible
2024-10-09 14:47 UTC (2+ messages)
[PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-09 13:34 UTC (12+ messages)
[PATCH v2] PCI: imx6: Add suspend/resume support for i.MX6QDL
2024-10-09 13:14 UTC
[PATCH v3 net 0/3] net: enetc: fix some issues of XDP
2024-10-09 12:56 UTC (9+ messages)
` [PATCH v3 net 1/3] net: enetc: remove xdp_drops statistic from enetc_xdp_drop()
` [PATCH v3 net 2/3] net: enetc: fix the issues of XDP_REDIRECT feature
` [PATCH v3 net 3/3] net: enetc: disable IRQ after Rx and Tx BD rings are disabled
[PATCH v2 0/2] clk: imx93: Move IMX93_CLK_END macro to clk driver
2024-10-09 11:51 UTC (6+ messages)
` [PATCH v2 1/2] "
Fix Sparse warnings
2024-10-09 11:08 UTC (8+ messages)
` [PATCH v2 1/2] spi: spi-fsl-dspi: Fix casting warnings
` [PATCH v2 2/2] spi: spi-imx: "
[PATCH v6 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
2024-10-09 9:52 UTC (4+ messages)
` [PATCH v6 2/3] arm64: dts: imx95: add usb3 related nodes
` [PATCH v6 3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
[PATCH] PCI: Add NXP NETC vendor ID and device IDs
2024-10-09 9:51 UTC (2+ messages)
[PATCH v6 1/2] dt-bindings: arm: Document the btt3 i.MX28 based board
2024-10-09 8:59 UTC (6+ messages)
` [PATCH v6 2/2] dts: nxp: mxs: Add descriptions for imx287 based btt3-[012] devices
[PATCH 0/3] media: imx8mq-mipi-csi2: Simplify power management handling
2024-10-09 8:30 UTC (6+ messages)
[PATCH v2 0/4] arm64: dts: imx8mm-kontron: Add HDMI and LVDS display support
2024-10-09 7:55 UTC (5+ messages)
` (subset) "
[PATCH v5] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
2024-10-09 7:03 UTC (2+ messages)
[PATCH v7 0/5] Changes in v7:
2024-10-09 5:15 UTC (10+ messages)
` [PATCH v7 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
` [EXT] "
[PATCH] phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
2024-10-09 3:25 UTC
[PATCH v2 1/3] usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag
2024-10-09 1:49 UTC (4+ messages)
` [PATCH v2 3/3] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible
[PATCH v2 net 0/3] net: enetc: fix some issues of XDP
2024-10-09 1:31 UTC (7+ messages)
` [PATCH v2 net 3/3] net: enetc: disable IRQ after Rx and Tx BD rings are disabled
[PATCH v4 0/3] PCI: dwc: opitimaze RC host pci_fixup_addr()
2024-10-08 19:54 UTC (4+ messages)
` [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
` [PATCH v4 2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
` [PATCH v4 3/3] PCI: imx6: Remove cpu_addr_fixup()
[PATCH v2 0/4] dmaengine: dma_request_chan*() amendments
2024-10-08 17:27 UTC (5+ messages)
` [PATCH v2 1/4] dmaengine: Replace dma_request_slave_channel() by dma_request_chan()
` [PATCH v2 2/4] dmaengine: Use dma_request_channel() instead of __dma_request_channel()
` [PATCH v2 3/4] dmaengine: Add a comment on why it's okay when kasprintf() fails
` [PATCH v2 4/4] dmaengine: Unify checks in dma_request_chan()
[PATCH v1 0/4] dmaengine: dma_request_chan*() amendments
2024-10-08 17:16 UTC (13+ messages)
` [PATCH v1 1/4] dmaengine: Replace dma_request_slave_channel() by dma_request_chan()
` [PATCH v1 2/4] dmaengine: Use dma_request_channel() instead of __dma_request_channel()
` [PATCH v1 3/4] dmaengine: Add a comment on why it's okay when kasprintf() fails
` [PATCH v1 4/4] dmaengine: Unify checks in dma_request_chan()
[PATCH v7 0/3] I3C: master: fix the address assign issue if assign-address is exist in dts
2024-10-08 15:18 UTC (4+ messages)
` [PATCH v7 1/3] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS
` [PATCH v7 2/3] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED
` [PATCH v7 3/3] i3c: master: Fix dynamic address leak when 'assigned-address' is present
[PATCH v3 0/4] arm64: dts: imx8mm-kontron: Add HDMI and LVDS display support
2024-10-08 14:37 UTC (3+ messages)
` [PATCH v3 3/4] arm64: dts: imx8mm-kontron: Add support for display bridges on BL i.MX8MM
` [PATCH v3 4/4] arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support
[PATCH v1] mmc: Fix typos in comments across various files
2024-10-08 14:35 UTC (2+ messages)
[PATCH v2 1/2] gpu: ipu-v3: vdic: Simplify ipu_vdi_setup()
2024-10-08 14:23 UTC (7+ messages)
` [PATCH v2 2/2] media: imx: vdic: Introduce mem2mem VDI deinterlacer driver
[PATCH v2 1/1] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
2024-10-08 13:34 UTC (2+ messages)
[PATCH v2 0/7] arm64: dts: freescale: imx95: add various nodes
2024-10-08 13:01 UTC (8+ messages)
` [PATCH v2 1/7] arm64: dts: freescale: imx95: set max-rx-timeout-ms
` [PATCH v2 4/7] arm64: dts: freescale: imx95: add anamix temperature thermal zone and cooling node
` [PATCH v2 6/7] arm64: dts: freescale: imx95-19x19-evk: add nxp,ctrl-ids property
[PATCH v7 1/2] dt-bindings: arm: Document the btt3 i.MX28 based board
2024-10-08 11:35 UTC (5+ messages)
` [PATCH v7 2/2] ARM: dts: mxs: Add descriptions for imx287 based btt3-[012] devices
[PATCH net-next v4 0/3] net: fec: add PPS channel configuration
2024-10-08 10:40 UTC (2+ messages)
[PATCH] tty: serial: fsl_lpuart: add 7-bits format support on imx7ulp/imx8ulp/imx8qxp
2024-10-08 9:44 UTC
[PATCH v4] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1
2024-10-08 9:35 UTC (2+ messages)
[PATCH v1] net: ethernet: fix NULL pointer dereference at fec_ptp_save_state()
2024-10-08 9:28 UTC (3+ messages)
[PATCH v2 0/2] add S32G2/S32G3 uSDHC pinmux
2024-10-08 9:25 UTC (2+ messages)
[PATCH 1/1] ARM: dts: imx6qdl: Add reserved memory area for CMA memory
2024-10-08 8:50 UTC (2+ messages)
[PATCH 0/6] Support spread spectrum clocking for i.MX8{M,N,P} PLLs
2024-10-08 9:16 UTC (12+ messages)
` [PATCH 1/6] dt-bindings: clock: imx8m-anatop: support spread spectrum clocking
[PATCH v1 0/2] Bug fixes when dwc generic suspend/resume functions are used
2024-10-08 8:25 UTC (4+ messages)
` [PATCH v1 1/2] PCI: dwc: Fix resume failure if no EP is connected on some platforms
[PATCH v3 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards
2024-10-08 7:24 UTC (2+ messages)
[PATCH V4] i2c: imx-lpi2c: add target mode support
2024-10-08 6:58 UTC (3+ messages)
[PATCH net 1/2] net: fec: Restart PPS after link state change
2024-10-08 5:49 UTC (4+ messages)
` [PATCH net 2/2] net: fec: Reload PTP registers after link-state change
[PATCH v1 1/1] arm64: dts: layerscape: remove cooling-max-state and cooling-min-state
2024-10-07 22:05 UTC
[PATCH v3 1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
2024-10-07 20:09 UTC (2+ messages)
[PATCH v3 1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
2024-10-07 19:53 UTC (2+ messages)
[PATCH v3 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
2024-10-07 19:13 UTC (2+ messages)
` [PATCH v3 2/2] mtd: nand: raw: gpmi: improve power management handling
[PATCH] ARM: dts: imx6qdl-dhcom: Fix model typo for i.MX6 DHSOM
2024-10-07 15:34 UTC (2+ messages)
[PATCH v2 0/2] PCI: add enabe(disable)_device() hook for bridge
2024-10-07 15:19 UTC (5+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox