Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
 messages from 2024-11-11 16:18:45 to 2024-11-14 22:53:10 UTC [more...]

[PATCH v7 0/6] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
 2024-11-14 22:52 UTC  (5+ messages)
` [PATCH v7 1/6] PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering
` [PATCH v7 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
` [PATCH v7 3/6] PCI: endpoint: Add pci_epf_align_addr() helper for address alignment
` [PATCH v7 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support

[PATCH 0/4] iio: accel: fxls8962af: add fxls8967af and fxls8974cf
 2024-11-14 20:08 UTC  (11+ messages)
` [PATCH 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af'
` [PATCH 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf'
` [PATCH 3/4] iio: accel: fxls8962af: add fxls8974cf support
` [PATCH 4/4] iio: accel: fxls8962af: add fxls8967af support

[PATCH 0/3] media: i2c: imx290: Add support for imx462
 2024-11-14 19:04 UTC  (5+ messages)
` [PATCH 1/3] media: i2c: imx290: Limit analogue gain according to module
` [PATCH 2/3] media: dt-bindings: media: i2c: Add IMX462 to the IMX290 binding
` [PATCH 3/3] media: i2c: imx290: Add configuration for IMX462

[PATCH] dt-bindings: phy: imx8mq-usb: optionally refer to usb-switch.yaml
 2024-11-14 17:45 UTC  (2+ messages)

[PATCH v5] soc: imx: Add SoC device register for i.MX9
 2024-11-14 17:39 UTC  (5+ messages)
  ` 回复: [EXT] "

[PATCH v7 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
 2024-11-14 17:28 UTC  (3+ messages)

[PATCH v5 0/2] PCI: add enabe(disable)_device() hook for bridge
 2024-11-14 16:48 UTC  (9+ messages)
` [PATCH v5 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
` [PATCH v5 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95

[PATCH] mailbox: imx: Modify the incorrect format specifier
 2024-11-14 16:42 UTC  (2+ messages)

[PATCH v4 0/4] add NXP RTC driver support for S32G2/S32G3 SoCs
 2024-11-14 14:42 UTC  (10+ messages)
` [PATCH v4 1/4] dt-bindings: rtc: add schema for NXP "
` [PATCH v4 2/4] rtc: s32g: add NXP S32G2/S32G3 SoC support

[PATCH v2 0/2] spi: imx: support word delay in ecspi
 2024-11-14 13:01 UTC  (6+ messages)
` [PATCH v2 1/2] spi: imx: pass struct spi_transfer to prepare_transfer()
` [PATCH v2 2/2] spi: imx: support word delay

[PATCH v9 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
 2024-11-14 11:03 UTC  (5+ messages)
` [PATCH v9 2/3] arm64: dts: imx95: add usb3 related nodes
` [PATCH v9 3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node

[PATCH v3 0/5] hwmon: tmp108: Add support for P3T1085
 2024-11-14  7:36 UTC  (19+ messages)
` [PATCH v3 1/5] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
` [PATCH v3 2/5] hwmon: tmp108: Add NXP p3t1085 support
` [PATCH v3 3/5] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support
` [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device
` [PATCH v3 5/5] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085

[PATCH v7 0/7] Add ITE IT6263 LVDS to HDMI converter support
 2024-11-14  6:57 UTC  (8+ messages)
` [PATCH v7 1/7] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
` [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
` [PATCH v7 3/7] drm/bridge: fsl-ldb: Get the next non-panel bridge
` [PATCH v7 4/7] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
` [PATCH v7 5/7] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "pix" "
` [PATCH v7 6/7] arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
` [PATCH v7 7/7] arm64: defconfig: Enable ITE IT6263 driver

[PATCH 0/3] Add i.MX91 platform support
 2024-11-14  6:09 UTC  (9+ messages)
` [PATCH 2/3] arm64: dts: freescale: Add i.MX91 dtsi support
` [PATCH 3/3] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support

[PATCH net] samples: pktgen: correct dev to DEV
 2024-11-14  3:10 UTC  (6+ messages)

[PATCH v2 0/3] clk: imx93: Add IMX93_CLK_SPDIF_IPG clock
 2024-11-14  2:37 UTC  (4+ messages)
` [PATCH v2 3/3] arm64: dts: imx93: Use IMX93_CLK_SPDIF_IPG as SPDIF IPG clock

[PATCH v3 net-next 0/5] Add more feautues for ENETC v4 - round 1
 2024-11-14  1:35 UTC  (14+ messages)
` [PATCH v3 net-next 1/5] net: enetc: add Rx checksum offload for i.MX95 ENETC
` [PATCH v3 net-next 2/5] net: enetc: add Tx "
` [PATCH v3 net-next 3/5] net: enetc: update max chained Tx BD number "
` [PATCH v3 net-next 4/5] net: enetc: add LSO support for i.MX95 ENETC PF
` [PATCH v3 net-next 5/5] net: enetc: add UDP segmentation offload support

[PATCH] clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate
 2024-11-13 21:19 UTC  (5+ messages)

[PATCH] ARM: dts: imxrt1050: Fix clocks for mmc
 2024-11-13 20:24 UTC  (2+ messages)

[PATCH v2 0/5] add sof support on imx95
 2024-11-13 20:21 UTC  (11+ messages)
` [PATCH v2 1/5] ASoC: dt-bindings: add common binding for NXP CPUs
` [PATCH v2 2/5] ASoC: dt-bindings: add binding for imx95's CM7 core
` [PATCH v2 3/5] ASoC: dt-bindings: audio-graph-card2: add widgets and hp-det-gpios support
` [PATCH v2 4/5] ASoC: SOF: imx: add driver for imx95
` [PATCH v2 5/5] arm64: dts: imx: add imx95 dts for sof

[PATCH 1/2] dt-bindings: timer: fsl,imxgpt: Fix the fsl,imx7d-gpt fallback
 2024-11-13 17:57 UTC  (4+ messages)

[PATCH v6 0/7] gpio: siul2-s32g2: add initial GPIO driver
 2024-11-13 15:26 UTC  (10+ messages)
` [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
` [PATCH v6 2/7] mfd: nxp-siul2: add support for NXP SIUL2
` [PATCH v6 3/7] arm64: dts: s32g: make pinctrl part of mfd node
` [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
` [PATCH v6 5/7] pinctrl: s32cc: change to "devm_pinctrl_register_and_init"
` [PATCH v6 6/7] pinctrl: s32cc: implement GPIO functionality
` [PATCH v6 7/7] MAINTAINERS: add MAINTAINER for NXP SIUL2 MFD driver

[PATCH v10 0/5] v10: firmware: imx: driver for NXP secure-enclave
 2024-11-13 10:48 UTC  (2+ messages)

[PATCH] clk: imx: pll14xx: Extend dynamic rates support to PLL1416x
 2024-11-13  9:43 UTC  (5+ messages)

[PATCH v6 0/5] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
 2024-11-13  9:02 UTC  (9+ messages)
` [PATCH v6 1/5] PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering
` [PATCH v6 2/5] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
` [PATCH v6 3/5] PCI: endpoint: pci-epf-test: Add doorbell test support
` [PATCH v6 4/5] misc: pci_endpoint_test: Add doorbell test case
` [PATCH v6 5/5] tools: PCI: Add 'B' option for test doorbell

[PATCH net-next] net: enetc: clean up before returning in probe()
 2024-11-13  7:42 UTC  (2+ messages)

Initialize ethernet phy in low power mode before ndo_open
 2024-11-12 19:43 UTC  (2+ messages)

[PATCH v3 0/2] mmc: host: sdhci-esdhc-imx: implement emmc hardware reset
 2024-11-12 18:43 UTC  (2+ messages)

[PATCH v1] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
 2024-11-12 18:04 UTC  (14+ messages)

[PATCH v4 0/2] add NXP LINFlexD UART clock support for S32G2/S32G3
 2024-11-12 17:36 UTC  (6+ messages)
` [PATCH v4 1/2] dt-bindings: serial: fsl-linflexuart: add clock definitions
` [PATCH v4 2/2] serial: fsl_linflexuart: add clock management

[PATCH V2 1/2] dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister
 2024-11-12 17:17 UTC  (5+ messages)
` [PATCH V2 2/2] dmaengine: fsl-edma: free irq correctly in remove path
  ` [PATCH V2 2/2] dmaengine: fsl-edma: free irq correctly in remove pathy

[PATCH v4 0/3] hwmon: tmp108: Add support for P3T1085
 2024-11-12 17:11 UTC  (7+ messages)
` [PATCH v4 1/3] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support
` [PATCH v4 2/3] hwmon: tmp108: Add support for I3C device
` [PATCH v4 3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085

[PATCH] pmdomain: imx: Use of_property_present() for non-boolean properties
 2024-11-12 15:56 UTC  (2+ messages)

[PATCH v5 1/3] dt-bindings: mtd: jedec,spi-nor: add optional vcc-supply
 2024-11-12 13:06 UTC  (6+ messages)
` [PATCH v5 2/3] mtd: spi-nor: use local variable for struct device
` [PATCH v5 3/3] mtd: spi-nor: support vcc-supply regulator

[RESEND PATCH v4 1/2] dt-bindings: mtd: jedec,spi-nor: add optional vcc-supply
 2024-11-12 13:02 UTC  (5+ messages)
` [RESEND PATCH v4 2/2] mtd: spi-nor: support vcc-supply regulator

[PATCH] firmware: Switch back to struct platform_driver::remove()
 2024-11-12 11:39 UTC  (2+ messages)

[PATCH] usb: chipidea: imx: add imx8ulp support
 2024-11-12 10:45 UTC  (2+ messages)

[PATCH v5 0/5] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
 2024-11-12 10:25 UTC  (4+ messages)
` [PATCH v5 3/5] PCI: endpoint: pci-epf-test: Add doorbell test support

[PATCH v6 0/7] Add ITE IT6263 LVDS to HDMI converter support
 2024-11-12 10:22 UTC  (9+ messages)
` [PATCH v6 1/7] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
` [PATCH v6 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
` [PATCH v6 3/7] drm/bridge: fsl-ldb: Get the next non-panel bridge
` [PATCH v6 4/7] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
` [PATCH v6 5/7] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "pix" "
` [PATCH v6 6/7] arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
` [PATCH v6 7/7] arm64: defconfig: Enable ITE IT6263 driver

[PATCH] clk: imx: pll14xx: Add 208 MHz and 416 MHz entries for PLL1416x
 2024-11-12  9:33 UTC  (2+ messages)

[PATCH] clk: imx8mp: Fix clkout1/2 support
 2024-11-12  8:39 UTC  (2+ messages)

[PATCH v2 net-next 0/5] Add more feautues for ENETC v4 - round 1
 2024-11-12  1:30 UTC  (9+ messages)
` [PATCH v2 net-next 2/5] net: enetc: add Tx checksum offload for i.MX95 ENETC

[PATCH v4 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code
 2024-11-11 21:38 UTC  (2+ messages)
` [PATCH v4 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4

[PATCH 0/8] TQMa7x DT cleanup
 2024-11-11 19:29 UTC  (3+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox