messages from 2025-02-07 12:37:56 to 2025-02-12 05:28:42 UTC [more...]
[PATCH 0/4] rtc/scmi: Support multiple RTCs
2025-02-12 6:35 UTC (7+ messages)
` [PATCH 4/4] rtc: imx-sm-bbm: "
[PATCH v2 0/4] scmi: Bypass set fwnode and introduce allow/block list to address devlink issue
2025-02-12 6:25 UTC (6+ messages)
` [PATCH v2 2/4] firmware: arm_scmi: Add machine_allowlist and machine_blocklist
[PATCH 0/2] ASoC: imx-card: support playback or capture only
2025-02-12 3:51 UTC (8+ messages)
` [PATCH 1/2] ASoC: dt-bindings: imx-card: Add playback-only and capture-only property
` [PATCH 2/2] ASoC: imx-card: Add playback_only or capture_only support
[PATCH 0/2] i.MX91/93 parallel display bridge
2025-02-12 3:26 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: display: bridge: ldb: Implement simple Freescale i.MX91/93 DPI bridge
` [PATCH 2/2] drm: bridge: imx9-parallel-disp-fmt: add i.MX91/93 parallel display bridge
[PATCH] ASoC: SOF: imx-common: set sdev->pdata->hw_pdata after common is alloc'd
2025-02-11 23:25 UTC (2+ messages)
[PATCH v4 0/3] add sof support on imx95
2025-02-11 23:23 UTC (5+ messages)
` [PATCH v4 1/3] ASoC: dt-bindings: support imx95's CM7 core
` [PATCH v4 2/3] ASoC: dt-bindings: audio-graph-card2: add widgets and hp-det-gpios support
` [PATCH v4 3/3] arm64: dts: imx: add imx95 dts for sof
[PATCH v15 00/15] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
2025-02-11 19:22 UTC (16+ messages)
` [PATCH v15 01/15] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
` [PATCH v15 02/15] irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
` [PATCH v15 03/15] irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
` [PATCH v15 04/15] irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
` [PATCH v15 05/15] PCI: endpoint: Set ID and of_node for function driver
` [PATCH v15 06/15] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
` [PATCH v15 07/15] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check
` [PATCH v15 08/15] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
` [PATCH v15 09/15] PCI: endpoint: pci-epf-test: Add doorbell test support
` [PATCH v15 10/15] misc: pci_endpoint_test: Add doorbell test case
` [PATCH v15 11/15] selftests: pci_endpoint: "
` [PATCH v15 12/15] pci: imx6: Add helper function imx_pcie_add_lut_by_rid()
` [PATCH v15 13/15] pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode
` [PATCH v15 14/15] arm64: dts: imx95: Add msi-map for pci-ep device
` [PATCH v15 15/15] arm64: dts: imx95-19x19-evk: Add PCIe1 endpoint function overlay file
[PATCH 00/12] drm: Move to using devm_platform_ioremap_resource
2025-02-11 17:45 UTC (3+ messages)
` [PATCH 07/12] drm/sti: move to devm_platform_ioremap_resource() usage
[PATCH v3 0/7] driver core: auxiliary bus: add device creation helper
2025-02-11 17:28 UTC (8+ messages)
` [PATCH v3 1/7] driver core: auxiliary bus: add device creation helpers
` [PATCH v3 2/7] reset: mpfs: use the auxiliary device creation helper
` [PATCH v3 3/7] drm/bridge: ti-sn65dsi86: "
` [PATCH v3 4/7] platform: arm64: lenovo-yoga-c630: "
` [PATCH v3 5/7] clk: eyeq: "
` [PATCH v3 6/7] clk: clk-imx8mp-audiomix: "
` [PATCH v3 7/7] clk: amlogic: axg-audio: use the auxiliary reset driver - take 2
[PATCH 0/4] scmi: Bypass set fwnode to address devlink issue
2025-02-11 17:13 UTC (3+ messages)
` [PATCH 1/4] firmware: arm_scmi: bus: Bypass setting fwnode for scmi cpufreq
[PATCH v7 0/4] add NXP RTC driver support for S32G2/S32G3 SoCs
2025-02-11 17:07 UTC (8+ messages)
` [PATCH v7 1/4] dt-bindings: rtc: add schema for NXP "
` [PATCH v7 2/4] rtc: s32g: add NXP S32G2/S32G3 SoC support
` [PATCH v7 3/4] arm64: defconfig: add S32G RTC module support
` [PATCH v7 4/4] MAINTAINERS: add NXP S32G RTC driver
[PATCH] dt-bindings: imx: fsl,aips-bus: Ensure all properties are defined
2025-02-11 16:07 UTC (2+ messages)
[PATCH v2 00/14] media: imx8: add camera support
2025-02-11 15:25 UTC (6+ messages)
` [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q
[PATCH v2 1/1] dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format
2025-02-11 15:07 UTC (5+ messages)
` (subset) "
[PATCH net-next v4] net: fec: Refactor MAC reset to function
2025-02-11 10:10 UTC (2+ messages)
[PATCH] dt-bindings: thermal: Correct indentation and style in DTS example
2025-02-11 8:55 UTC (2+ messages)
[PATCH v4 0/2] thermal: imx91: Add support for i.MX91 thermal monitoring unit
2025-02-11 8:27 UTC (5+ messages)
` [PATCH v4 2/2] "
[RFC PATCH 1/3] clk: imx: clk-fracn-gppll: Do not access num/denom register for integer PLL
2025-02-11 7:47 UTC (4+ messages)
` [RFC PATCH 2/3] clk: imx: clk-fracn-gppll: Refactor clk_fracn_gppll_calc_rate
` [RFC PATCH 3/3] clk: imx: clk-fracn-gppll: Support dynamic rates
[PATCH] PM: sleep: core: Set is_prepared to false before checking direct_complete
2025-02-11 6:43 UTC (2+ messages)
[PATCH v2 00/10] Make i.MX8M OCOTP work as accessing controller
2025-02-11 3:33 UTC (13+ messages)
` [PATCH v2 02/10] nvmem: imx-ocotp: Support accessing controller for i.MX8M
` [PATCH v2 04/10] arm64: dts: imx8mn: Add access-controller references
` [PATCH v2 05/10] arm64: dts: imx8mp: Add i.MX8M Plus OCOTP disable fuse definitions
` [PATCH v2 09/10] arm64: dts: imx8mq: Add i.MX8M "
[PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
2025-02-11 0:01 UTC (39+ messages)
` [PATCH v2 01/12] dt-bindings: powerpc: Add Freescale/NXP MPC83xx SoCs
` [PATCH v2 02/12] dt-bindings: ata: Convert fsl,pq-sata to YAML
` [PATCH v2 03/12] dt-bindings: crypto: Convert fsl,sec-2.0 "
` [PATCH v2 03/12] dt-bindings: crypto: Convert fsl,sec-2.0 to YAMLy
` [PATCH v2 04/12] dt-bindings: mfd: Convert fsl,mcu-mpc8349emitx to YAML
` [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma "
` [PATCH v2 06/12] dt-bindings: pci: Convert fsl,mpc83xx-pcie "
` [PATCH v2 07/12] dt-bindings: watchdog: Convert mpc8xxx-wdt "
` [PATCH v2 08/12] dt-bindings: spi: Convert Freescale SPI bindings "
` [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc "
` [PATCH v2 10/12] dt-bindings: memory-controllers: Add fsl,elbc-gpcm-uio
` [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nand
` [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nandy
` [PATCH v2 12/12] dt-bindings: mtd: raw-nand-chip: Relax node name pattern
panel-lvds for imx8mm-verdin boards
2025-02-10 21:36 UTC (4+ messages)
[PATCH v2 1/1] dt-bindings: display: nwl-dsi: Allow 'data-lanes' property for port@1
2025-02-10 21:09 UTC (3+ messages)
[PATCH v3 00/12] media: imx8: add camera support
2025-02-10 20:59 UTC (13+ messages)
` [PATCH v3 01/12] dt-bindings: firmware: imx: add property reset-controller
` [PATCH v3 02/12] reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
` [PATCH v3 03/12] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI
` [PATCH v3 04/12] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink
` [PATCH v3 05/12] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP
` [PATCH v3 06/12] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings
` [PATCH v3 07/12] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different "
` [PATCH v3 08/12] media: imx8mq-mipi-csi2: Add support for i.MX8QXP
` [PATCH v3 09/12] arm64: dts: imx8: add capture controller for i.MX8's img subsystem
` [PATCH v3 10/12] arm64: dts: imx8qm: add 24MHz clock-xtal24m
` [PATCH v3 11/12] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek
` [PATCH v3 12/12] arm64: dts: imx8q: add camera ov5640 support "
[PATCH v3 0/7] Refactor imx drivers and introduce support for imx95
2025-02-10 16:30 UTC (10+ messages)
` [PATCH v3 1/7] ASoC: SOF: imx: introduce more common structures and functions
` [PATCH v3 2/7] ASoC: SOF: imx8: use common imx chip interface
` [PATCH v3 3/7] ASoC: SOF: imx8: use IMX_SOF_* macros
` [PATCH v3 4/7] ASoC: SOF: imx8: drop unneeded/unused macros/header includes
` [PATCH v3 5/7] ASoC: SOF: imx: merge imx8 and imx8m drivers
` [PATCH v3 6/7] ASoC: SOF: imx: merge imx8 and imx8ulp drivers
` [PATCH v3 7/7] ASoC: SOF: imx: add driver for the imx95 chip
[PATCH v2 0/8] Refactor imx drivers and introduce support for imx95
2025-02-10 16:30 UTC (2+ messages)
` (subset) "
[PATCH 0/9] Refactor imx drivers and introduce support for imx95
2025-02-10 16:29 UTC (2+ messages)
[PATCH] media: dt-bindings: media: i2c: align filenames format with standard
2025-02-10 16:04 UTC (5+ messages)
[PATCH v2 1/2] dmaengine: Use str_enable_disable-like helpers
2025-02-10 14:35 UTC (2+ messages)
[PATCH] dmaengine: fsl-edma: Add missing newlines to log messages
2025-02-10 14:35 UTC (2+ messages)
[PATCH v3 0/4] dmaengine: dma_request_chan*() amendments
2025-02-10 14:35 UTC (2+ messages)
[PATCH v2 0/4] dmaengine: dma_request_chan*() amendments
2025-02-10 14:35 UTC (2+ messages)
[PATCH] arm64: dts: colibri-imx8x: Add missing gpio-line-names
2025-02-10 12:30 UTC
[PATCH] gpio: vf610: add locking to gpio direction functions
2025-02-10 9:35 UTC (3+ messages)
[PATCH 0/2] i3c: Add basic HDR mode support
2025-02-09 22:26 UTC (12+ messages)
` [PATCH 1/2] i3c: Add basic HDR support
[PATCH] media: dt-bindings: media: i2c: align IMX219 filename format with others
2025-02-09 19:57 UTC (3+ messages)
[PATCH v5 00/11] RISC-V IMSIC driver improvements
2025-02-09 4:16 UTC (12+ messages)
` [PATCH v5 01/11] irqchip/riscv-imsic: Set irq_set_affinity for IMSIC base
` [PATCH v5 02/11] irqchip/irq-msi-lib: Optionally set default irq_eoi/irq_ack
` [PATCH v5 03/11] irqchip/riscv-imsic: Move to common MSI lib
` [PATCH v5 04/11] genirq: Introduce common irq_force_complete_move() implementation
` [PATCH v5 05/11] genirq: Introduce irq_can_move_in_process_context()
` [PATCH v5 06/11] genirq: Remove unused GENERIC_PENDING_IRQ_CHIPFLAGS kconfig option
` [PATCH v5 07/11] RISC-V: Select GENERIC_PENDING_IRQ
` [PATCH v5 08/11] irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector
` [PATCH v5 09/11] irqchip/riscv-imsic: Implement irq_force_complete_move() for IMSIC
` [PATCH v5 10/11] irqchip/riscv-imsic: Replace hwirq with irq in the IMSIC vector
` [PATCH v5 11/11] irqchip/riscv-imsic: Special handling for non-atomic device MSI update
[PATCH v4 00/11] RISC-V IMSIC driver improvements
2025-02-08 16:39 UTC (4+ messages)
` [PATCH v4 04/11] genirq: Introduce common irq_force_complete_move() implementation
[PATCH v14 00/15] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
2025-02-08 15:43 UTC (19+ messages)
` [PATCH v14 01/15] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
` [PATCH v14 02/15] irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
` [PATCH v14 03/15] irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
` [PATCH v14 04/15] irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
` [PATCH v14 05/15] PCI: endpoint: Set ID and of_node for function driver
` [PATCH v14 06/15] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
` [PATCH v14 07/15] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check
` [PATCH v14 08/15] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
` [PATCH v14 09/15] PCI: endpoint: pci-epf-test: Add doorbell test support
` [PATCH v14 10/15] misc: pci_endpoint_test: Add doorbell test case
` [PATCH v14 11/15] selftests: pci_endpoint: "
` [PATCH v14 12/15] pci: imx6: Add helper function imx_pcie_add_lut_by_rid()
` [PATCH v14 13/15] pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode
` [PATCH v14 14/15] arm64: dts: imx95: Add msi-map for pci-ep device
` [PATCH v14 15/15] arm64: dts: imx95-19x19-evk: Add PCIe1 endpoint function overlay file
[PATCH resend v2 1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes
2025-02-07 20:00 UTC
[PATCH 0/3] TQMa93xx fixes
2025-02-07 13:53 UTC (2+ messages)
[PATCH v2 0/4] clk: Support spread spectrum and use it in clk-pll144x and clk-scmi
2025-02-07 13:14 UTC (8+ messages)
` [PATCH v2 3/4] clk: imx: pll14xx: support spread spectrum clock generation
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox