Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
 messages from 2025-09-08 17:12:08 to 2025-09-11 03:26:29 UTC [more...]

[PATCH] arm64: dts: imx8mp: Correct thermal sensor index
 2025-09-11  3:25 UTC  (2+ messages)

[PATCH] arm64: dts: imx95: add standard PCI device compatible string to NETC Timer
 2025-09-11  3:22 UTC  (2+ messages)

[PATCH 00/16] ARM: dts: imx6: clean up some dtb check warnings
 2025-09-11  3:21 UTC  (2+ messages)

[PATCH v2 0/2] TQMa91xx support
 2025-09-11  3:15 UTC  (3+ messages)
` [PATCH v2 2/2] arm64: dts: freescale: add initial device tree for TQMa91xx/MBa91xxCA

[PATCH v10 0/6] Add i.MX91 platform support
 2025-09-11  2:55 UTC  (5+ messages)

[PATCH v3 0/3] nvmem: s32g-ocotp: Add driver for S32G OCOTP
 2025-09-11  2:36 UTC  (3+ messages)
` [PATCH v3 3/3] arm64: dts: s32g: Add device tree information for the OCOTP driver

[PATCH 1/1] dt-bindings: fsl: fsl,imx7ulp-smc1: Allow clocks and clock-names
 2025-09-11  2:18 UTC  (2+ messages)

[PATCH] ARM: imx: Kconfig: Adjust select after renamed config option
 2025-09-11  2:14 UTC  (2+ messages)

[PATCH v2] ARM: dts: imx6ul-tx6ul: Switch away from deprecated `phy-reset-gpios`
 2025-09-11  2:03 UTC  (2+ messages)

[PATCH v2 0/3] firmware: imx: Add stub functions for MISC/CPU/LMM APIs
 2025-09-11  2:00 UTC  (3+ messages)

[PATCH v3 0/3] arm64: dts: add descriptions for solidrun i.mx8mp based boards
 2025-09-11  1:51 UTC  (7+ messages)
` [PATCH v3 1/3] dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards
` [PATCH v3 2/3] arm64: dts: add description for solidrun imx8mp som and cubox-m
` [PATCH v3 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants

[PATCH 1/1] ARM: dts: mba6ul: Add MicIn routing
 2025-09-11  1:16 UTC  (2+ messages)

[PATCH v4 1/1] arm64: defconfig: Enable Marvell WiFi-Ex USB driver
 2025-09-11  1:15 UTC  (2+ messages)

[PATCH v2] dt-bindings: soc: imx-iomuxc-gpr: Document the CSI mux
 2025-09-11  1:14 UTC  (2+ messages)

[PATCH v2 0/6] remoteproc: imx_proc: Simplify driver by removing the switch-case
 2025-09-11  1:13 UTC  (9+ messages)
` [PATCH v2 1/6] remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg
` [PATCH v2 2/6] remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match
` [PATCH v2 3/6] remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case
` [PATCH v2 4/6] remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API "
` [PATCH v2 5/6] remoteproc: imx_rproc: Simplify IMX_RPROC_SMC "
` [PATCH v2 6/6] remoteproc: imx_rproc: Clean up after ops introduction

[PATCH 00/10] arm64: dts: freescale/nxp/imx: Minor GIC interrupt-map cleanups
 2025-09-11  1:11 UTC  (2+ messages)

[PATCH] dt-bindings: soc: fsl,imx-iomuxc-gpr: Document i.MX53
 2025-09-11  1:09 UTC  (2+ messages)

[PATCH 0/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
 2025-09-11  1:08 UTC  (3+ messages)
` [PATCH 2/2] arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace xceiver-supply

[PATCH v5 0/2] Add TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board support
 2025-09-11  1:06 UTC  (2+ messages)

[PATCH v2] arm64: dts: imx8mp: add interconnect for lcdif-hdmi
 2025-09-11  0:54 UTC  (2+ messages)

[PATCH v3 0/4] ARM: dts: clean up most ls1021a CHECK_DTB warning
 2025-09-11  0:49 UTC  (2+ messages)

[net-next v19 0/7] net: mtip: Add support for MTIP imx287 L2 switch driver
 2025-09-11  0:22 UTC  (7+ messages)
` [net-next v19 4/7] net: mtip: Add net_device_ops functions to the "

[PATCH 1/1] dt-bindings: touchscreen: resistive-adc-touch: change to unevaluatedProperties
 2025-09-10 22:44 UTC 

[TECH TOPIC] Reaching consensus on CONFIG_HIGHMEM phaseout
 2025-09-10 21:56 UTC  (18+ messages)

[PATCH 00/11] i.MX SDMA cleanups and fixes
 2025-09-10 21:41 UTC  (18+ messages)
` [PATCH 06/11] dmaengine: imx-sdma: make use of devm_add_action_or_reset to unregiser the dma_device
` [PATCH 07/11] dmaengine: imx-sdma: make use of dev_err_probe()
` [PATCH 08/11] dmaengine: imx-sdma: fix missing of_dma_controller_free()
` [PATCH 09/11] dmaengine: add support for device_link

[PATCH] dt-bindings: soc: imx-iomuxc-gpr: Document the CSI mux
 2025-09-10 21:03 UTC  (2+ messages)

[PATCH v2 0/3] regulator: sy7636a: define and init all resources needed
 2025-09-10 19:18 UTC  (10+ messages)
` [PATCH v2 1/3] dt-bindings: mfd: sy7636a: Add missing gpio pins and supply
` [PATCH v2 2/3] regulator: sy7636a: add gpios and input regulator
` [PATCH v2 3/3] ARM: dts: imx: e70k02: add sy7636

[PATCH v7 net-next 0/6] net: fec: add the Jumbo frame support
 2025-09-10 18:52 UTC  (7+ messages)
` [PATCH v7 net-next 1/6] net: fec: use a member variable for maximum buffer size
` [PATCH v7 net-next 2/6] net: fec: add pagepool_order to support variable page size
` [PATCH v7 net-next 3/6] net: fec: update MAX_FL based on the current MTU
` [PATCH v7 net-next 4/6] net: fec: add rx_frame_size to support configurable RX length
` [PATCH v7 net-next 5/6] net: fec: add change_mtu to support dynamic buffer allocation
` [PATCH v7 net-next 6/6] net: fec: enable the Jumbo frame support for i.MX8QM

[PATCH 0/4] Mainline Protonic PRT8ML board
 2025-09-10 16:55 UTC  (14+ messages)
` [PATCH 1/4] dt-bindings: net: dsa: nxp,sja1105: Add reset-gpios property
` [PATCH 2/4] ASoC: dt-bindings: asahi-kasei,ak4458: Reference common DAI properties
` [PATCH 3/4] dt-bindings: arm: fsl: Add Protonic PRT8ML
` [PATCH 4/4] arm64: dts: add Protonic PRT8ML board

[PATCH RESEND v4 1/3] dt-bindings: lcdif: Document a imx6sx-lcdif fallback
 2025-09-10 16:39 UTC  (7+ messages)
` [PATCH RESEND v4 2/3] dt-bindings: lcdif: Expand the imx6sl/imx6sll fallbacks
` [PATCH RESEND v4 3/3] ARM: dts: imx6sl: Provide a more specific lcdif compatible

[PATCH 0/2] firmware: arm_scmi/imx: Support dump syslog
 2025-09-10 16:10 UTC  (6+ messages)
` [PATCH 1/2] firmware: arm_scmi: imx: Support getting syslog of MISC protocol
` [PATCH 2/2] firmware: imx: sm-misc: Dump syslog info

[RESEND PATCH 0/4] Input: imx6ul_tsc - set glitch threshold by dts property
 2025-09-10 15:40 UTC  (8+ messages)
` [RESEND PATCH 1/4] Input: imx6ul_tsc - fix typo in register name
` [RESEND PATCH 2/4] dt-bindings: input: touchscreen: fsl,imx6ul-tsc: add fsl,glitch-threshold
` [RESEND PATCH 3/4] Input: imx6ul_tsc - set glitch threshold by DTS property
` [RESEND PATCH 4/4] Input: imx6ul_tsc - use BIT, FIELD_{GET,PREP} and GENMASK macros

[PATCH v2 0/8] Replace verbatim license text with a `SPDX-License-Identifier`
 2025-09-10 13:29 UTC  (5+ messages)
` [PATCH v2 2/8] ARM: dts: imx53-usbarmory: Replace license text comment with SPDX identifier

next-20250910: ERROR: modpost: "typec_switch_set" [drivers/extcon/extcon-ptn5150.ko] undefined!
 2025-09-10 12:28 UTC 

[PATCH V2 RESEND] dt-bindings: firmware: imx95-scmi: Allow linux,code for protocol@81
 2025-09-10 12:21 UTC  (4+ messages)

[PATCH v2] usb: typec: tcpci: add wakeup support
 2025-09-10 10:50 UTC 

[PATCH] usb: typec: tcpci: add wakeup support
 2025-09-10 10:42 UTC  (4+ messages)

[PATCH v5 0/7] drm/bridge: imx: Add HDMI PAI driver on i.MX8MP
 2025-09-10 10:29 UTC  (6+ messages)
` [PATCH v5 4/7] drm/bridge: dw-hdmi: Add API dw_hdmi_set_sample_iec958() for iec958 format

[PATCH 0/3] gpio/pinctrl/mfd: use more common syntax for compound literals
 2025-09-10 10:03 UTC  (5+ messages)
` [PATCH 1/3] mfd: vexpress-sysreg: "
` [PATCH 2/3] pinctrl: "
` [PATCH 3/3] gpio: "

Strange PMIC behaviour with rohm bd71847 on Ka-Ro tx8m-1610 (imx8mm)
 2025-09-10  8:57 UTC  (4+ messages)

[PATCH v21 0/9] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
 2025-09-10  8:32 UTC  (3+ messages)
` [PATCH v21 9/9] arm64: dts: imx95: Add msi-map for pci-ep device

[PATCH v2] ARM: dts: imx6-aristainetos2: Replace license text comment with SPDX identifier
 2025-09-10  8:29 UTC  (2+ messages)

[PATCH v1] dts: arm64: freescale: move imx9*-clock.h imx9*-power.h into dt-bindings
 2025-09-10  7:07 UTC  (10+ messages)

[PATCH v6 net-next 0/6] net: fec: add the Jumbo frame support
 2025-09-10  3:08 UTC  (14+ messages)
` [PATCH v6 net-next 1/6] net: fec: use a member variable for maximum buffer size
` [PATCH v6 net-next 3/6] net: fec: update MAX_FL based on the current MTU
` [PATCH v6 net-next 4/6] net: fec: add rx_frame_size to support configurable RX length
` [PATCH v6 net-next 5/6] net: fec: add change_mtu to support dynamic buffer allocation
` [PATCH v6 net-next 6/6] net: fec: enable the Jumbo frame support for i.MX8QM

[PATCH 00/13] arm64: dts: imx95: various updates
 2025-09-10  2:41 UTC  (7+ messages)
` [PATCH 08/13] arm64: dts: imx95-19x19-evk: Add phy supply for netc

[PATCH v2 net-next 0/3] ptp: add pulse signal loopback support for debugging
 2025-09-10  2:40 UTC  (2+ messages)

[PATCH v6 0/9] phy: phy-can-transceiver: Support TJA1048/TJA1051
 2025-09-10  2:33 UTC  (11+ messages)
` [PATCH v6 1/9] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048
` [PATCH v6 2/9] phy: phy-can-transceiver: Introduce can_transceiver_priv
` [PATCH v6 3/9] phy: phy-can-transceiver: Add dual channel support for TJA1048
` [PATCH v6 4/9] phy: phy-can-transceiver: Drop the gpio desc check
` [PATCH v6 5/9] phy: phy-can-transceiver: Propagate return value of gpiod_set_value_cansleep
` [PATCH v6 6/9] phy: phy-can-transceiver: Add support for TJA105{1,7}
` [PATCH v6 7/9] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply
` [PATCH v6 8/9] arm64: dts: imx8mp-evk: "
` [PATCH v6 9/9] arm64: dts: imx93-11x11-evk: "

[RESEND v4 1/4] usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n
 2025-09-10  1:57 UTC  (8+ messages)
` [RESEND v4 2/4] dt-bindings: extcon: ptn5150: Allow "connector" node to present
` [RESEND v4 3/4] extcon: ptn5150: Add Type-C orientation switch support
` [RESEND v4 4/4] extcon: ptn5150: Support USB role switch via connector fwnode

[PATCH 0/6] remoteproc: imx_proc: Simplify driver by removing the switch-case
 2025-09-09 16:15 UTC  (7+ messages)
` [PATCH 6/6] remoteproc: imx_rproc: Clean up after ops introduction

[PATCH 0/4] regulator: sy7636a: define and init all resources needed
 2025-09-09 13:34 UTC  (7+ messages)
` [PATCH 1/4] dt-bindings: mfd: sy7636a: Add missing gpio pins and supply
` (subset) [PATCH 0/4] regulator: sy7636a: define and init all resources needed

[PATCH v3 00/39] drm/atomic: Get rid of existing states (not really)
 2025-09-09 11:27 UTC  (4+ messages)
` [PATCH v3 17/39] drm/imx-dc: Switch to drm_atomic_get_new_crtc_state()
` [PATCH v3 18/39] drm/imx-dcss: "
` [PATCH v3 19/39] drm/imx-ipuv3: "

[PATCH v4 0/6] firmware: arm_scmi: imx: Dump syslog and system_info
 2025-09-09 10:32 UTC  (7+ messages)
` [PATCH v4 5/6] firmware: arm_scmi: imx: Support getting syslog of MISC protocol
` (subset) [PATCH v4 0/6] firmware: arm_scmi: imx: Dump syslog and system_info

[PATCH v1 0/2] PCI: imx6: Add a method to handle CLKREQ# override
 2025-09-09  7:17 UTC  (8+ messages)
` [PATCH v1 2/2] PCI: imx6: Add a method to handle CLKREQ# override active low

[PATCH v4 0/3] Replace verbatim license text with a `SPDX-License-Identifier`
 2025-09-09  6:03 UTC  (4+ messages)
` [PATCH v4 1/3] ARM: dts: imx6-sr-som: Replace license text comment with SPDX identifier
` [PATCH v4 2/3] ARM: dts: imx6-hummingboard: "
` [PATCH v4 3/3] ARM: dts: imx6q-h100: "

[PATCH v3] ARM: dts: imx6-cubox: Replace license text comment with SPDX identifier
 2025-09-09  5:45 UTC  (2+ messages)

[PATCH v2 0/9] arm64: dts: imx95: Add support for Mali G310 GPU
 2025-09-09  0:52 UTC  (6+ messages)
` [PATCH v2 9/9] arm64: dts: imx95: Describe "

[PATCH] ARM: dts: imx6sll: Use 'dma-names'
 2025-09-08 20:50 UTC  (2+ messages)

[PATCH v5 0/6] cpufreq: use __free() for all cpufreq_cpu_get() references
 2025-09-08 17:55 UTC  (6+ messages)
` [PATCH v5 2/6] ACPI: processor: thermal: Use scope-based cleanup helper

[PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
 2025-09-08 17:11 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox