messages from 2025-10-22 16:21:56 to 2025-10-24 20:24:30 UTC [more...]
[PATCH v2 net-next 0/4] net: phy: add iterator mdiobus_for_each_phy
2025-10-24 20:24 UTC (5+ messages)
` [PATCH v2 net-next 1/4] "
` [PATCH v2 net-next 2/4] net: fec: use new "
` [PATCH v2 net-next 3/4] net: davinci_mdio: "
` [PATCH v2 net-next 4/4] net: phy: use new iterator mdiobus_for_each_phy in mdiobus_prevent_c45_scan
[PATCH v3 0/9] spi: enable the SpacemiT K1 SoC QSPI
2025-10-24 19:15 UTC (8+ messages)
` [PATCH v3 1/9] dt-bindings: spi: fsl-qspi: support SpacemiT K1
` [PATCH v3 2/9] dt-bindings: spi: fsl-qspi: add optional resets
` [PATCH v3 3/9] spi: fsl-qspi: add optional reset support
` [PATCH v3 4/9] spi: fsl-qspi: switch predicates to bool
` [PATCH v3 5/9] spi: fsl-qspi: add a clock disable quirk
` [PATCH v3 6/9] spi: fsl-qspi: introduce sfa_size devtype data
` [PATCH v3 7/9] spi: fsl-qspi: support the SpacemiT K1 SoC
[PATCH v2 0/6] perf/imx_ddr: Add i.MX8QM and pmu in DB (system interconnects)
2025-10-24 18:17 UTC (7+ messages)
` [PATCH v2 1/6] dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
` [PATCH v2 2/6] perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
` [PATCH v2 3/6] perf/imx_ddr: Get and enable optional clks
` [PATCH v2 4/6] perf/imx_ddr: Add support for PMU in DB (system interconnects)
` [PATCH v2 5/6] arm64: dts: imx8qm: add ddr perf device node
` [PATCH v2 6/6] arm64: dts: imx8dxl-ss-ddr: Add DB (system interconnects) pmu support for i.MX8DXL
[PATCH v8 0/3] PCI: imx6: Add external reference clock mode support
2025-10-24 17:06 UTC (6+ messages)
` [PATCH v8 1/3] dt-bindings: PCI: dwc: Add external reference clock input
` [PATCH v8 2/3] dt-bindings: PCI: pci-imx6: "
` [PATCH v8 3/3] PCI: imx6: Add external reference clock input mode support
[PATCH 1/2] arm64: dts: freescale: imx93-phyboard-nash: Add jtag overlay
2025-10-24 16:54 UTC (6+ messages)
` [PATCH 2/2] arm64: dts: freescale: imx93-phyboard-nash: Add pwm-fan overlay
[PATCH v6 0/5] i3c: Add basic HDR mode support
2025-10-24 16:29 UTC (20+ messages)
` [PATCH v6 1/5] i3c: Add HDR API support
` [PATCH v6 2/5] i3c: master: svc: Replace bool rnw with union for HDR support
` [PATCH v6 3/5] i3c: master: svc: Add basic HDR mode support
` [PATCH v6 5/5] iio: magnetometer: Add mmc5633 sensor
[PATCH v1 0/2] arm64: dts: freescale: add Toradex SMARC iMX95
2025-10-24 16:10 UTC (4+ messages)
` [PATCH v1 1/2] dt-bindings: arm: fsl: "
` [PATCH v1 2/2] arm64: dts: freescale: "
[PATCH 0/6] perf/imx_ddr: Add i.MX8QM and pmu in DB (system interconnects)
2025-10-24 15:50 UTC (11+ messages)
` [PATCH 1/6] dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
` [PATCH 2/6] perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
` [PATCH 3/6] perf/imx_ddr: Get and enable optional clks
` [PATCH 4/6] perf/imx_ddr: Add support for PMU in DB (system interconnects)
` [PATCH 5/6] arm64: dts: imx8qm: add ddr perf device node
` [PATCH 6/6] arm64: dts: imx8dxl-ss-ddr: Add DB (system interconnects) pmu support for i.MX8DXL
[PATCH] spi: imx: remove CLK calculation and check for target mode
2025-10-24 15:32 UTC (2+ messages)
[PATCH] spi: imx: support SPI target PIO mode for IMX51_ECSPI
2025-10-24 15:30 UTC (2+ messages)
[PATCH v4 0/4] remoteproc: imx_rproc: misc clean up
2025-10-24 14:57 UTC (6+ messages)
` [PATCH v4 1/4] remoteproc: imx_rproc: Simplify clock enable logic using dcfg flags
` [PATCH v4 2/4] remoteproc: imx_rproc: Make detach operation platform-specific
` [PATCH v4 3/4] remoteproc: imx_rproc: Enable PM runtime support unconditionally
` [PATCH v4 4/4] remoteproc: imx_rproc: Remove the assignement to method
[PATCH] ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
2025-10-24 14:21 UTC
[PATCH] spi: imx: keep dma request disabled before dma transfer setup
2025-10-24 14:16 UTC (2+ messages)
[PATCH v1 0/7] Add vpcie3v3aux regulator for i.MX PCIe M.2 connector
2025-10-24 13:53 UTC (9+ messages)
` [PATCH v1 1/7] arm64: dts: imx8dxl-evk: Add vpcie3v3aux regulator for "
` [PATCH v1 2/7] arm64: dts: imx8mp-evk: "
` [PATCH v1 3/7] arm64: dts: imx8mq-evk: "
` [PATCH v1 4/7] arm64: dts: imx8qm-mek: "
` [PATCH v1 5/7] arm64: dts: imx8qxp-mek: "
` [PATCH v1 6/7] arm64: dts: imx95-15x15-evk: "
` [PATCH v1 7/7] arm64: dts: imx95-19x19-evk: Add vpcie3v3aux regulator for PCIe[0,1]
[PATCH 0/3] media: nxp: imx8-isi: Add ISI support for i.MX95
2025-10-24 13:50 UTC (7+ messages)
` [PATCH 1/3] media: dt-bindings: nxp,imx8-isi: Add i.MX95 ISI compatible string
` [PATCH 2/3] media: nxp: imx8-isi: Keep the default value for BLANK_PXL field
` [PATCH 3/3] media: nxp: imx8-isi: Add ISI support for i.MX95
[PACTH v2] spi: imx: add 16/32 bits per word support for target mode
2025-10-24 13:24 UTC (2+ messages)
[PATCH 0/4] dt-bindings: treewide: don't check node names
2025-10-24 10:24 UTC (2+ messages)
` (subset) "
[PATCH 0/8] arm64: dts: imx8dxl related fix and minor update
2025-10-24 9:18 UTC (10+ messages)
` [PATCH 1/8] arm64: dts: imx8dxl: Correct pcie-ep interrupt number
` [PATCH 2/8] arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
` [PATCH 3/8] arm64: dts: imx8dxl-evk: add bt information for lpuart1
` [PATCH 4/8] arm64: dts: imx8dxl-evk: add state_100mhz and state_200mhz for usdhc
` [PATCH 5/8] arm64: dts: imx8: add default clock rate "
` [PATCH 6/8] arm64: dts: imx8-ss-conn: add fsl,tuning-step for usdhc1 and usdhc2
` [PATCH 7/8] arm64: dts: imx8-ss-conn: add missed clock enet_2x_txclk for fec[1,2]
` [PATCH 8/8] arm64: dts: imx8dxl-ss-conn: delete usb3_lpcg node
[PATCH] spi: imx: add 16/32 bits per word support for target mode
2025-10-24 7:12 UTC (2+ messages)
[PATCH 0/4 v3] PCI: s32g: Add support for PCIe controller
2025-10-24 6:58 UTC (12+ messages)
` [PATCH 1/4 v3] dt-bindings: PCI: s32g: Add NXP "
` [PATCH 2/4 v3] PCI: dw: Add more registers and bitfield definition
` [PATCH 3/4 v3] PCI: s32g: Add initial PCIe support (RC)
` [PATCH 4/4 v3] MAINTAINERS: Add MAINTAINER for NXP S32G PCIe driver
[PATCH v2 0/8] Add support for i.MX8ULP's SIM LPAV
2025-10-24 3:36 UTC (6+ messages)
` [PATCH v2 1/8] reset: imx8mp-audiomix: Fix bad mask values
` [PATCH v2 3/8] clk: imx: add driver for imx8ulp's sim lpav
[PATCH v7 0/3] Add quirks to proceed PME handshake in DWC PM
2025-10-24 2:56 UTC (4+ messages)
` [PATCH v7 1/3] PCI: dwc: Don't poll L2 if QUIRK_NOL2POLL_IN_PM is existing in suspend
` [PATCH v7 2/3] PCI: dwc: Skip PME_Turn_Off message if there is no endpoint connected
` [PATCH v7 3/3] PCI: dwc: Don't return error when wait for link up in dw_pcie_resume_noirq()
[PATCH v2 0/9] spi: enable the SpacemiT K1 SoC QSPI
2025-10-24 2:31 UTC (25+ messages)
` [PATCH v2 1/9] dt-bindings: spi: fsl-qspi: support SpacemiT K1
` [PATCH v2 2/9] dt-bindings: spi: fsl-qspi: add optional resets
` [PATCH v2 3/9] spi: fsl-qspi: add optional reset support
` [PATCH v2 4/9] spi: fsl-qspi: switch predicates to bool
` [PATCH v2 5/9] spi: fsl-qspi: add a clock disable quirk
` [PATCH v2 6/9] spi: fsl-qspi: allot 1KB per chip
` [PATCH v2 7/9] spi: fsl-qspi: support the SpacemiT K1 SoC
[PATCH v2] clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code
2025-10-24 2:15 UTC (2+ messages)
[PATCH v1] arm64: defconfig: Enable i.MX95 configs for booting and Ethernet
2025-10-23 20:16 UTC (11+ messages)
[PATCH 1/1] dt-bindings: iio: pressure: Remove vdd-supply and vddio-supply from required list
2025-10-23 17:17 UTC (4+ messages)
[PATCH v2 net-next 0/6] net: enetc: Add i.MX94 ENETC support
2025-10-23 15:39 UTC (10+ messages)
` [PATCH v2 net-next 1/6] dt-bindings: net: netc-blk-ctrl: add compatible string for i.MX94 platforms
` [PATCH v2 net-next 2/6] dt-bindings: net: enetc: add compatible string for ENETC with pseduo MAC
` [PATCH v2 net-next 3/6] net: enetc: add preliminary i.MX94 NETC blocks control support
` [PATCH v2 net-next 4/6] net: enetc: add ptp timer binding support for i.MX94
` [PATCH v2 net-next 5/6] net: enetc: add basic support for the ENETC with pseudo MAC "
` [PATCH v2 net-next 6/6] net: enetc: add standalone ENETC support "
[PATCH v3 0/2] Add devicetree for NXP i.MX93 FRDM board
2025-10-23 13:51 UTC (4+ messages)
` [PATCH v3 2/2] arm64: dts: freescale: add support for NXP i.MX93 FRDM
[PATCH 0/2] dts: imx: cleanup warning cause by fsl,mpl3115
2025-10-23 13:51 UTC (4+ messages)
` [PATCH 1/2] arm64: dts: imx8: add vdd-supply and vddio-supply for fsl,mpl3115
` [PATCH 2/2] ARM: dts: imx: "
[PATCH] arm64: dts: freescale: imx93-phy{core,board}: Add i2c bus recovery
2025-10-23 13:18 UTC (3+ messages)
` [PATCH] arm64: dts: freescale: imx93-phy{core, board}: "
[PATCH v7 0/5] Add MIPI CSI-2 support for i.MX8ULP
2025-10-23 9:19 UTC (6+ messages)
` [PATCH v7 1/5] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string
` [PATCH v7 2/5] media: imx8mq-mipi-csi2: Use devm_clk_bulk_get_all() to fetch clocks
` [PATCH v7 3/5] media: imx8mq-mipi-csi2: Explicitly release reset
` [PATCH v7 4/5] media: imx8mq-mipi-csi2: Add support for i.MX8ULP
` [PATCH v7 5/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes
[PATCH v3 0/4] media: i2c: ds90ub953: Add back channel GPIO support
2025-10-23 8:41 UTC (2+ messages)
[PATCH] clk: imx: imx8mp-audiomix: Use the auxiliary device creation helper
2025-10-23 6:56 UTC (3+ messages)
[PATCH] serial: imx: allow CRTSCTS with RTS/CTS GPIOs
2025-10-23 6:55 UTC (7+ messages)
[PATCH v3 0/5] remoteproc: imx_rproc: misc clean up
2025-10-23 5:11 UTC (4+ messages)
` [PATCH v3 5/5] MAINTAINERS: Add an entry for i.MX remoteproc driver
[PATCH v4 1/2] dt-bindings: touchscreen: trivial-touch: add reset-gpios and wakeup-source
2025-10-22 20:26 UTC (4+ messages)
` [PATCH v4 2/2] dt-bindings: touchscreen: consolidate simple touch controller to trivial-touch.yaml
[PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC phyBOARD-Segin-i.MX91 board
2025-10-22 17:39 UTC (2+ messages)
[PATCH v5 0/4] media: imx-mipi-csis: Get the number of active lanes from mbus_config
2025-10-22 16:21 UTC (3+ messages)
` [PATCH v5 4/4] media: imx-mipi-csis: Support active data lanes differing from maximum
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox