messages from 2026-07-02 03:26:22 to 2026-07-03 16:05:38 UTC [more...]
[PATCH v1 1/1] arm64: dts: freescale: imx9-var-dart-sonata: fix Ethernet PHY configuration
2026-07-03 16:05 UTC (3+ messages)
[PATCH v2 1/1] arm64: dts: freescale: imx95-var-dart: enable NETC block control
2026-07-03 15:06 UTC
[PATCH v1 1/1] arm64: dts: freescale: imx95-var-dart: enable NETC block control
2026-07-03 15:00 UTC (2+ messages)
[PATCH 5.10/5.15] clk: imx: Add check for kcalloc
2026-07-03 12:13 UTC
[PATCH v2 0/5] arm64: dts: describe the Lynx 10G and 28G SerDes blocks for Layerscape SoCs
2026-07-03 11:42 UTC (6+ messages)
` [PATCH v2 1/5] arm64: dts: lx2160a: transition to device-specific SerDes compatible strings
[PATCH v4 0/7] mmc: sdhci-esdhc-imx: fix SDIO suspend/resume issues
2026-07-03 11:32 UTC (11+ messages)
` [PATCH v4 1/7] mmc: sdhci-esdhc-imx: remove unnecessary mmc_card_wake_sdio_irq check for tuning save/restore
` [PATCH v4 2/7] mmc: sdhci-esdhc-imx: restore DLL override for DDR modes on resume
` [PATCH v4 3/7] mmc: sdhci-esdhc-imx: restore pinctrl before restoring ios timing "
` [PATCH v4 4/7] mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
` [PATCH v4 5/7] mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
` [PATCH v4 6/7] mmc: sdhci-esdhc-imx: make non-fatal errors non-blocking "
` [PATCH v4 7/7] mmc: sdhci-esdhc-imx: fix resume error handling
[PATCH v5 0/5] i3c: Improve CCC reliability with actual_len, validation, and Direct GET retry
2026-07-03 11:06 UTC (8+ messages)
` [PATCH v5 1/5] i3c: ccc: Add actual_len to struct i3c_ccc_cmd_payload
` [PATCH v5 2/5] i3c: master: Report actual GET CCC payload length on success
` [PATCH v5 3/5] i3c: master: dw: Map CCC hardware errors to I3C M0/M2
` [PATCH v5 4/5] i3c: master: Validate GET CCC payload length and retry Direct GET once
` [PATCH v5 5/5] i3c: master: Add optional_bytes for variable-length GET CCC validation
[PATCH v6 0/5] Add support for AAEON SRG-IMX8P MCU
2026-07-03 11:00 UTC (6+ messages)
` [PATCH v6 3/5] mfd: aaeon: Add SRG-IMX8P MCU driver
` [PATCH v6 4/5] gpio: aaeon: Add GPIO driver for SRG-IMX8P MCU
[PATCH v3 net-next 00/14] net: enetc: cleanups and improvements
2026-07-03 10:13 UTC (15+ messages)
` [PATCH v3 net-next 01/14] net: enetc: extract common helpers for MAC promiscuous mode setting
` [PATCH v3 net-next 02/14] net: enetc: extract common helpers for MAC hash filter configuration
` [PATCH v3 net-next 03/14] net: enetc: convert ndo_set_rx_mode() to ndo_set_rx_mode_async()
` [PATCH v3 net-next 04/14] net: enetc: improve MAFT entry management with bitmap tracking
` [PATCH v3 net-next 05/14] net: enetc: use PCI device name for debugfs directory
` [PATCH v3 net-next 06/14] net: enetc: simplify enetc4_set_port_speed()
` [PATCH v3 net-next 07/14] net: enetc: differentiate phylink capabilities for pseudo-MAC and standalone MAC
` [PATCH v3 net-next 08/14] net: enetc: remove invalid code from enetc4_pl_mac_link_up()
` [PATCH v3 net-next 09/14] net: enetc: open-code enetc4_set_default_si_vlan_promisc()
` [PATCH v3 net-next 10/14] net: enetc: refactor SI VLAN promiscuous mode configuration
` [PATCH v3 net-next 11/14] net: enetc: move enetc_set_si_vlan_promisc() to enetc_pf_common.c
` [PATCH v3 net-next 12/14] net: enetc: remove redundant num_vsi field from enetc_port_caps
` [PATCH v3 net-next 13/14] net: enetc: use alloc_etherdev_mqs() to create netdev for VF driver
` [PATCH v3 net-next 14/14] net: enetc: use kzalloc_flex() for enetc_psfp_gate allocation
[PATCH net-next v11 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains
2026-07-03 10:21 UTC (12+ messages)
` [PATCH net-next v11 1/7] dt-bindings: phy: document the serdes PHY on sa8255p
[PATCH v4] remoteproc: imx_rproc: Invoke the callback directly
2026-07-03 9:44 UTC (3+ messages)
[PATCH v4 0/3] i3c: Improve CCC reliability for DesignWare master
2026-07-03 9:16 UTC (9+ messages)
` [PATCH v4 1/3] i3c: master: dw: Report actual GET CCC payload length on success
` [PATCH v4 3/3] i3c: master: Validate GET CCC payload length and retry Direct GET once
[PATCH v1 00/15] arm64: dts: freescale: imx8mn-var-som: Align SOM and Symphony DTSs
2026-07-03 9:01 UTC (22+ messages)
` [PATCH v1 01/15] arm64: dts: freescale: imx8mn-var-som: Move UART4 description to Symphony
` [PATCH v1 02/15] arm64: dts: freescale: imx8mn-var-som: move SD card support "
` [PATCH v1 03/15] arm64: dts: freescale: imx8mn-var-som: Align fsl,pins tables
` [PATCH v1 04/15] arm64: dts: freescale: imx8mn-var-som: Update FEC support with MaxLinear PHY
` [PATCH v1 05/15] arm64: dts: freescale: imx8mn-var-som: Add support for WM8904 audio codec
` [PATCH v1 06/15] arm64: dts: freescale: imx8mn-var-som: Add MCP251xFD CAN controller
` [PATCH v1 07/15] arm64: dts: freescale: imx8mn-var-som: Rework WiFi/BT and add legacy dts
` [PATCH v1 08/15] arm64: dts: freescale: imx8mn-var-som: drop duplicate USB OTG node
` [PATCH v1 09/15] arm64: dts: freescale: imx8mn-var-som: enable FlexSPI interface
` [PATCH v1 10/15] arm64: dts: imx8mn-var-som-symphony: Add TPM2 support
` [PATCH v1 11/15] arm64: dts: imx8mn-var-som-symphony: Enable I2C4
` [PATCH v1 12/15] arm64: dts: imx8mn-var-som-symphony: add wakeup sources
` [PATCH v1 13/15] arm64: dts: imx8mn-var-som-symphony: keep RGB_SEL low
` [PATCH v1 14/15] arm64: dts: imx8mn-var-som-symphony: enable PWM1
` [PATCH v1 15/15] arm64: dts: imx8mn-var-som-symphony: Disable internal RTC
[PATCH v2 net-next 00/14] net: enetc: cleanups and improvements
2026-07-03 7:02 UTC (20+ messages)
` [PATCH v2 net-next 02/14] net: enetc: extract common helpers for MAC hash filter configuration
` [PATCH v2 net-next 06/14] net: enetc: simplify enetc4_set_port_speed()
` [PATCH v2 net-next 07/14] net: enetc: differentiate phylink capabilities for pseudo-MAC and standalone MAC
` [PATCH v2 net-next 08/14] net: enetc: remove invalid code from enetc4_pl_mac_link_up()
` [PATCH v2 net-next 10/14] net: enetc: refactor SI VLAN promiscuous mode configuration
` [PATCH v2 net-next 11/14] net: enetc: move enetc_set_si_vlan_promisc() to enetc_pf_common.c
` [PATCH v2 net-next 12/14] net: enetc: remove redundant num_vsi field from enetc_port_caps
` [PATCH v2 net-next 13/14] net: enetc: use alloc_etherdev_mqs() to create netdev for VF driver
` [PATCH v2 net-next 14/14] net: enetc: use kzalloc_flex() for enetc_psfp_gate allocation
[PATCH] usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
2026-07-03 6:39 UTC (2+ messages)
[PATCH net] net: phy: motorcomm: read EEE abilities in yt8521_get_features()
2026-07-03 3:03 UTC (6+ messages)
[PATCH v3 00/10] dmaengine: dw-edma: flatten desc structions and simple code
2026-07-02 21:40 UTC (21+ messages)
` [PATCH v3 01/10] dmaengine: dw-edma: Move control field update of DMA link to the last step
` [PATCH v3 02/10] dmaengine: dw-edma: Add xfer_sz field to struct dw_edma_chunk
` [PATCH v3 03/10] dmaengine: dw-edma: Move ll_region from struct dw_edma_chunk to struct dw_edma_chan
` [PATCH v3 04/10] dmaengine: dw-edma: Pass down dw_edma_chan to reduce one level of indirection
` [PATCH v3 05/10] dmaengine: dw-edma: Add helper dw_(edma|hdma)_v0_core_ch_enable()
` [PATCH v3 06/10] dmaengine: dw-edma: Add callbacks to fill link list entries
` [PATCH v3 07/10] dmaengine: dw-edma: Add non_ll_start() callback
` [PATCH v3 08/10] dmaengine: dw-edma: Use common dw_edma_core_start() for both eDMA and HDMA
` [PATCH v3 09/10] dmaengine: dw-edma: Use burst array instead of linked list
` [PATCH v3 10/10] dmaengine: dw-edma: Remove struct dw_edma_chunk
[PATCH v7 0/8] media: add new API simple subdev register and add imx parallel camera support
2026-07-02 18:59 UTC (17+ messages)
` [PATCH v7 1/8] media: subdev: Add set_pad_by_ep() callback to internal ops
` [PATCH v7 2/8] media: subdev: Add media_async_register_subdev() helper
` [PATCH v7 3/8] media: synopsys: Use v4l2_subdev_get_frame_desc_passthrough()
` [PATCH v7 4/8] media: synopsys: Use media_async_register_subdev() to simplify code
` [PATCH v7 5/8] dt-bindings: media: add i.MX parallel CPI support
` [PATCH v7 6/8] media: nxp: add V4L2 subdev driver for camera parallel interface (CPI)
` [PATCH v7 7/8] arm64: dts: imx8: add camera parallel interface (CPI) node
` [PATCH v7 8/8] arm64: dts: imx8qxp-mek: add parallel ov5640 camera support
[PATCH v2 00/11] lib/cpumask: get rid of cpumap_print_to_pagebuf()
2026-07-02 16:21 UTC (26+ messages)
` [PATCH v2 01/11] arm: Use sysfs_emit() for cpumask show callbacks
` [PATCH v2 02/11] powerpc: "
` [PATCH v2 03/11] x86/events: "
` [PATCH v2 04/11] cpu: Use sysfs_emit() for cpumask show callback
` [PATCH v2 05/11] devfreq: Use sysfs_emit() for cpumask show callbacks
` [PATCH v2 06/11] fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show
` [PATCH v2 07/11] hwtracing: hisi_ptt: "
` [PATCH v2 08/11] RDMA/hfi1: Use sysfs_emit() for cpumask show helper
` [PATCH v2 09/11] PCI/sysfs: Use sysfs_emit() for cpumask show callbacks
` [PATCH v2 10/11] perf: "
` [PATCH v2 11/11] lib/bitmap-str: get rid of cpumap_print_to_pagebuf()
[PATCH v3 1/1] reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
2026-07-02 15:53 UTC (2+ messages)
[PATCH v7 0/9] dmaengine: Add new API to combine configuration and descriptor preparation
2026-07-02 15:26 UTC (2+ messages)
[PATCH v5 0/2] dmaengine: fsl-edma: Scatter/gather improvements
2026-07-02 13:17 UTC (6+ messages)
` [PATCH v5 1/2] dmaengine: fsl-edma: Implement device_prep_peripheral_dma_vec
` [PATCH v5 2/2] dmaengine: fsl-edma: Support dynamic scatter/gather chaining
[PATCH 00/18] Add DT support for CSI2RX multi-stream
2026-07-02 10:54 UTC (29+ messages)
` [PATCH 01/18] arm64: dts: ti: k3-{j721e/j721s2}-main: Fix indentation in CSI2RX node
` [PATCH 02/18] arm64: dts: ti: k3-j721e-main: Add multiple channels for CSI2RX DMA
` [PATCH 03/18] arm64: dts: ti: k3-j721s2-main: "
` [PATCH 04/18] arm64: dts: ti: k3-j784s4-j742s2-main-common: "
` [PATCH 05/18] arm64: dts: ti: k3-am62p-j722s: "
` [PATCH 06/18] arm64: dts: ti: k3-j722s-main: "
` [PATCH 07/18] arm64: dts: ti: k3-j721e: Add overlay for fusion application daughter board
` [PATCH 08/18] arm64: dts: ti: k3-j721s2: "
` [PATCH 09/18] arm64: dts: ti: k3-j721e-sk: "
` [PATCH 10/18] arm64: dts: ti: k3-j722s-evm: "
` [PATCH 11/18] arm64: dts: ti: k3-am68-sk: Add overlay for dual Arducam V3link fusion
` [PATCH 12/18] arm64: dts: ti: k3-j722s-evm: "
` [PATCH 13/18] arm64: dts: ti: k3-j784s4-evm: Add overlay for J7EXPA01EVM Fusion2
` [PATCH 14/18] arm64: dts: ti: k3-j722s-evm: "
` [PATCH 15/18] arm64: dts: ti: k3-j721s2: Add overlay for DS90UB954-Q1EVM
` [PATCH 16/18] arm64: dts: ti: k3-j721e: "
` [PATCH 17/18] arm64: dts: ti: k3-v3link: Add overlay for IMX219+UB953 serializer
` [PATCH 18/18] arm64: defconfig: Enable DS90UB960 deserializer and DS90UB953 serializer
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox