Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
 messages from 2026-09-22 03:30:21 to 2026-09-23 18:43:37 UTC [more...]

[PATCH v16 0/5] Enable Remote GPIO over RPMSG on i.MX Platform
 2026-09-23 18:42 UTC  (4+ messages)
` [PATCH v16 1/5] docs: driver-api: gpio: rpmsg gpio driver over rpmsg bus
` [PATCH v16 2/5] dt-bindings: remoteproc: imx_rproc: Add "rpmsg" subnode support
` [PATCH v16 3/5] rpmsg: core: match rpmsg device IDs by prefix

[PATCH RFC 00/12] remoteproc: add support for any virtio device
 2026-09-23 18:42 UTC  (25+ messages)
` [PATCH RFC 05/12] remoteproc: always report VIRTIO_F_VERSION_1 feature
` [PATCH RFC 06/12] remoteproc: virtio: add bounce buffering for data buffers
` [PATCH RFC 08/12] dt-bindings: remoteproc: add remoteproc-virtio
` [PATCH RFC 12/12] PoC: arm64: dts: imx93-11x11-frdm: add multiple vdevs

[PATCH v3] i2c: imx: honour I2C_M_IGNORE_NAK
 2026-09-23 18:09 UTC  (2+ messages)

[PATCH v2 00/12] dmaengine: Add dmaengine API to avoid call DMA Engine callback directly
 2026-09-23 16:32 UTC  (16+ messages)
` [PATCH v2 01/12] async_tx: replace direct ->device_prep*() calls with standard DMA engine API
` [PATCH v2 02/12] async_tx: use dmaengine_get_dma_device() instead of chan->device->dev
` [PATCH v2 03/12] dmaengine: add dmaengine_prep_dma_(pq|pq_val|interrupt|xor)() API
` [PATCH v2 04/12] dmaengine: add dmaengine_is_*_aligned() helpers for DMA consumers
` [PATCH v2 05/12] dmaengine: add dmaengine_get_copy_align() and related alignment getter helpers
` [PATCH v2 06/12] dmaengine: add dmaengine_get_cap_mask() and dmaengine_has_cap() helpers
` [PATCH v2 07/12] dmaengine: add dmaengine_get_max_xor() helper
` [PATCH v2 08/12] dmaengine: change dmaengine_get_unmap_data() first arg to dma_chan
` [PATCH v2 09/12] dmaengine: replace dma_maxqp() with dmaengine_maxpq() taking struct dma_chan *
` [PATCH v2 10/12] async_tx: use dmaengine_prep_dma_(pq|pq_val|interrupt|xor) instead of direct callback
` [PATCH v2 11/12] async_tx: convert to dmaengine_is_*_aligned() helpers
` [PATCH v2 12/12] async_tx: replace open-coded cap_mask accesses with dmaengine_has_cap()

[PATCH V5 0/4] arm64: dts: freescale: Add chargebyte Charge Control Y
 2026-09-23 16:11 UTC  (7+ messages)
` (subset) "

[PATCH v7 0/2] firmware: arm_scmi: fix module auto-loading
 2026-09-23 15:42 UTC  (12+ messages)
` [PATCH v7 1/2] module: add SCMI device table alias support

[RESEND PATCH v5 0/5] ASoC: fsl_asrc/fsl_easrc: expose per-pair/context DAIs and fix DMA race
 2026-09-23 15:32 UTC  (12+ messages)
` [RESEND PATCH v5 1/5] ASoC: dt-bindings: fsl,imx-asrc: update port binding to support multiple paths
` [RESEND PATCH v5 3/5] ASoC: fsl_asrc/fsl_easrc: move DMA params into pair/context struct
` [RESEND PATCH v5 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path
` [RESEND PATCH v5 5/5] ASoC: fsl_easrc: "

[PATCH net-next v15 0/9] net: stmmac: qcom-ethqos: add support for SCMI power domains
 2026-09-23 15:14 UTC  (10+ messages)
` [PATCH net-next v15 1/9] net: phy: aquantia: fix system interface type not updated in forced mode
` [PATCH net-next v15 2/9] dt-bindings: phy: document the serdes PHY on sa8255p
` [PATCH net-next v15 3/9] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems
` [PATCH net-next v15 4/9] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
` [PATCH net-next v15 5/9] net: stmmac: qcom-ethqos: set serdes mode before powerup
` [PATCH net-next v15 6/9] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()
` [PATCH net-next v15 7/9] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data
` [PATCH net-next v15 8/9] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function
` [PATCH net-next v15 9/9] net: stmmac: qcom-ethqos: add support for sa8255p

[PATCH 0/4] arm64: dts: freescale: Add Toradex iMX95 overlays
 2026-09-23 15:06 UTC  (10+ messages)
` [PATCH 1/4] arm64: dts: freescale: imx95-verdin: Add NAU8822 Bridge Tied Load
` [PATCH 2/4] arm64: dts: freescale: imx95-verdin: Add Cortex-M7 UART_4 overlay
` [PATCH 3/4] arm64: dts: freescale: imx95-aquila: "
` [PATCH 4/4] arm64: dts: freescale: imx95-toradex-smarc: Add Cortex-M7 SER0 overlay

[PATCHv3 0/3] m68k: coldfire: fix non-standard readX()/writeX() functions
 2026-09-23 14:40 UTC  (9+ messages)
` [PATCHv3 1/3] net: fec: do not use readl()/writel() for ColdFire
` [PATCHv3 2/3] net: smc91x: do not use readw()/writew() on ColdFire platforms

[PATCH 0/2] Remove unused variant and code clean up
 2026-09-23 14:29 UTC  (7+ messages)
` [PATCH 1/2] media: verisilicon: Remove deprecated variant
` [PATCH 2/2] media: verisilicon: Remove useless internal fields

[PATCH] net: fec: reject oversized fragments before bounce-buffer memcpy
 2026-09-23 14:11 UTC 

[PATCH] serial: fsl_lpuart: add support for GPIO-controlled modem lines
 2026-09-23 12:53 UTC 

[PATCH 0/3] pmdomain: imx: Use pm_runtime_resume_and_get()
 2026-09-23 12:15 UTC  (2+ messages)

[PATCH v3] pmdomain: imx8m-blk-ctrl: Serialize power on/off across sibling domains
 2026-09-23 12:15 UTC  (2+ messages)

[PATCH 00/14] media: Add V4L2 H.264 stateless encode and VC8000E support
 2026-09-23 12:10 UTC  (3+ messages)

[PATCH 0/4] da9062/da9061 watchdog timeout mode
 2026-09-23 11:25 UTC  (9+ messages)
` [PATCH 1/4] mfd: da9062: make register CONFIG_I writable
` [PATCH 2/4] mfd: da9061: "
` [PATCH 3/4] watchdog: da9062: reset board on watchdog timeout
` [PATCH 4/4] ARM: dts: imx6: phycore-som: set watchdog timeout mode to shutdown

[PATCH v2 0/2] usb: gadget: uvc: fix resource leak on video->async_wq and video->kworker
 2026-09-23 10:51 UTC  (5+ messages)
` [PATCH v2 1/2] usb: gadget: uvc: replace mutex lock/unlock with scoped_guard in uvc_function_bind()
` [PATCH v2 2/2] usb: gadget: uvc: refactor video cleanup into uvcg_video_deinit()

[PATCH] serial: imx: cancel RS485 trigger hrtimers in shutdown and remove
 2026-09-23 10:17 UTC  (2+ messages)

[PATCH v3 00/18] Add DT support for CSI2RX multi-stream
 2026-09-23  9:34 UTC  (19+ messages)
` [PATCH v3 01/18] arm64: dts: ti: k3-{j721e/j721s2}-main: Fix indentation in CSI2RX node
` [PATCH v3 02/18] arm64: dts: ti: k3-j721e-main: Add multiple channels for CSI2RX DMA
` [PATCH v3 03/18] arm64: dts: ti: k3-j721s2-main: "
` [PATCH v3 04/18] arm64: dts: ti: k3-j784s4-j742s2-main-common: "
` [PATCH v3 05/18] arm64: dts: ti: k3-am62p-j722s: "
` [PATCH v3 06/18] arm64: dts: ti: k3-j722s-main: "
` [PATCH v3 07/18] arm64: dts: ti: k3-j721e: Add overlay for fusion application daughter board
` [PATCH v3 08/18] arm64: dts: ti: k3-j721s2: "
` [PATCH v3 09/18] arm64: dts: ti: k3-j721e-sk: "
` [PATCH v3 10/18] arm64: dts: ti: k3-j722s-evm: "
` [PATCH v3 11/18] arm64: dts: ti: k3-am68-sk: Add overlay for dual Arducam V3link fusion
` [PATCH v3 12/18] arm64: dts: ti: k3-j722s-evm: "
` [PATCH v3 13/18] arm64: dts: ti: k3-j784s4-evm: Add overlay for J7EXPA01EVM Fusion2
` [PATCH v3 14/18] arm64: dts: ti: k3-j722s-evm: "
` [PATCH v3 15/18] arm64: dts: ti: k3-j721s2: Add overlay for DS90UB954-Q1EVM
` [PATCH v3 16/18] arm64: dts: ti: k3-j721e: "
` [PATCH v3 17/18] arm64: dts: ti: k3-v3link: Add overlay for IMX219+UB953 serializer
` [PATCH v3 18/18] arm64: defconfig: Enable DS90UB960 deserializer and DS90UB953 serializer

[PATCH 0/2] ARM: dts: phyCORE-i.MX6 custom OPP table
 2026-09-23  8:36 UTC  (5+ messages)
` [PATCH 1/2] ARM: dts: imx6dl: Add a label to cpu1 node
` [PATCH 2/2] ARM: dts: imx6qdl: phycore-som: Add custom volt/freq table

[PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers
 2026-09-23  7:12 UTC  (3+ messages)
` [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular "

[PATCH v4 net-next 8/8] net: dsa: netc: add PTP one-step timestamping support
 2026-09-23  6:11 UTC  (3+ messages)

[PATCH v9 0/5] Add CAMSS and IMX577 sensor support for Shikra EVK
 2026-09-23  4:57 UTC  (6+ messages)
` [PATCH v9 1/5] arm64: dts: qcom: shikra: Add CAMSS node for Shikra
` [PATCH v9 2/5] arm64: dts: qcom: shikra: Add CCI definitions "
` [PATCH v9 3/5] arm64: dts: qcom: shikra: Add mclks pin configuration "
` [PATCH v9 4/5] arm64: dts: qcom: shikra-cqm-cqs-evk-imx577-camera: Add DT overlay "
` [PATCH v9 5/5] arm64: dts: qcom: shikra-iqs-evk-imx577-camera: "

[PATCH v4 net-next 7/8] net: dsa: netc: add PTP two-step timestamping support
 2026-09-23  2:43 UTC  (3+ messages)

[PATCH v2] i2c: imx: add I2C_M_REV_DIR_ADDR and I2C_M_NOSTART
 2026-09-22 23:52 UTC  (4+ messages)

[PATCH 1/1] dmaengine: change dmaengine_get_unmap_data() first arg to dma_chan
 2026-09-22 23:09 UTC  (2+ messages)

[PATCH v5 00/12] Add S32N79RDB UFS support
 2026-09-22 18:51 UTC  (16+ messages)
` [PATCH v5 01/12] scsi: ufs: dwc: Return a negative error if the link is down
` [PATCH v5 02/12] ufs: unipro: Move Tx/Rx FSM state definitions to unipro.h
` [PATCH v5 03/12] ufs: unipro: Add TX/RX FSM state attributes
` [PATCH v5 04/12] ufs: host: Add common Hibern8 TX FSM polling helper
` [PATCH v5 05/12] scsi: ufs: Move Versal2 M-PHY CREG access helpers into ufshcd-dwc
` [PATCH v5 06/12] scsi: ufs: dwc: Export common clock divider and link status helpers
` [PATCH v5 07/12] dt-bindings: ufs: Add NXP S32N79 UFS host controller
` [PATCH v5 08/12] scsi: ufs: dwc: Sort CBCRCTRL and CBREFCLKCTRL2 by offset
` [PATCH v5 09/12] scsi: ufs: Add NXP S32N79 UFS host controller driver
` [PATCH v5 10/12] arm64: dts: freescale: s32n79: Add UFS host controller
` [PATCH v5 11/12] arm64: dts: freescale: s32n79-rdb: Enable UFS
` [PATCH v5 12/12] MAINTAINERS: Add NXP S32N7 UFS host controller entry

[PATCH v8 0/5] Add CAMSS and IMX577 sensor support for Shikra EVK
 2026-09-22 17:20 UTC  (10+ messages)
` [PATCH v8 1/5] arm64: dts: qcom: shikra: Add CAMSS node for Shikra
` [PATCH v8 2/5] arm64: dts: qcom: shikra: Add CCI definitions "
` [PATCH v8 4/5] arm64: dts: qcom: shikra-cqm-cqs-evk-imx577-camera: Add DT overlay "
` [PATCH v8 5/5] arm64: dts: qcom: shikra-iqs-evk-imx577-camera: "

[PATCH v7] PCI: imx6: fix resource leaks in probe error paths
 2026-09-22 16:36 UTC  (2+ messages)

[GIT PULL v2] iMX fixes for 7.3
 2026-09-22 14:55 UTC 

[PATCH] leds: pca9532: check i2c_smbus_read_byte_data() return value
 2026-09-22 12:30 UTC  (2+ messages)
` (subset) "

[PATCH] pmdomain: imx: gpc: remove all initialized power domains
 2026-09-22 12:17 UTC  (4+ messages)

[PATCH v2] usb: typec: tcpm: advance vdm_discovery_state on Discover Identity Not_Supported
 2026-09-22 10:50 UTC  (2+ messages)

[PATCH v4 net-next 5/8] net: dsa: netc: check return value of ntmp_ipft_delete_entry()
 2026-09-22 10:34 UTC  (3+ messages)

[PATCH v4 net-next 3/8] ptp: netc: export netc_timer_get_current_time() for cross-driver use
 2026-09-22  9:48 UTC  (3+ messages)

[PATCH v3 00/19] drm/panel: embed a drm_bridge into every drm_panel
 2026-09-22  8:57 UTC  (11+ messages)
` [PATCH v3 12/19] drm/mcde: dsi: don't create a panel_bridge
` [PATCH v3 19/19] drm/bridge: analogix_dp: "

[PATCH v3 18/19] drm/tve200: don't create a panel_bridge
 2026-09-22  7:28 UTC  (2+ messages)

[PATCH v3 17/19] drm/omap: dss: don't create a panel_bridge
 2026-09-22  7:21 UTC  (2+ messages)

[PATCH v3 16/19] drm/bridge: ssd2825: don't create a panel_bridge
 2026-09-22  7:21 UTC  (2+ messages)

[PATCH v3 15/19] drm/bridge: tc358768: don't create a panel_bridge
 2026-09-22  7:10 UTC  (2+ messages)

[PATCH v3 14/19] drm/bridge: samsung-dsim: don't create a panel_bridge
 2026-09-22  7:10 UTC  (2+ messages)

[PATCH v3 13/19] drm/bridge: fsl-ldb: don't create a panel_bridge
 2026-09-22  7:09 UTC  (2+ messages)

[PATCH v3 11/19] drm/mcde: dsi: remove unused includes
 2026-09-22  6:59 UTC  (2+ messages)

[PATCH v3 10/19] drm/bridge: waveshare-dsi: don't create a panel_bridge
 2026-09-22  6:59 UTC  (2+ messages)

[PATCH v3 09/19] drm/bridge: tc358767: don't create a panel_bridge
 2026-09-22  6:59 UTC  (2+ messages)

[PATCH v3 08/19] drm/todo: add entry for removing the panel_bridge API
 2026-09-22  6:58 UTC  (2+ messages)

[PATCH v3 07/19] drm/panel: deprecate panel-bridge APIs
 2026-09-22  6:57 UTC  (2+ messages)

[PATCH v3 06/19] drm/bridge: remove devm_drm_put_bridge()
 2026-09-22  6:57 UTC  (2+ messages)

[PATCH v3 05/19] drm/panel: embed a drm_bridge into every drm_panel
 2026-09-22  6:56 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox