Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
 messages from 2026-11-03 13:55:30 to 2026-11-04 14:27:15 UTC [more...]

[PATCH 0/7] ARM: dts: Add Apalis iMX6 overlays
 2026-11-04 14:27 UTC  (4+ messages)
` [PATCH 7/7] ARM: dts: imx6q-apalis: Add Toradex OV5640 CSI Cameras

[PATCH] i2c: Convert to subsys_platform_driver()
 2026-11-04 14:18 UTC  (4+ messages)

[PATCH net-next v3 1/5] net: enetc: Add pseudo-MAC support for ENETCv4 Ports via a fixed-link node
 2026-11-04 14:09 UTC  (6+ messages)
` [PATCH net-next v3 2/5] net: enetc: Enable probing of version 4.4 devices
` [PATCH net-next v3 3/5] arm64: dts: s32n79: add NETC IEP18 ECAM node for ENETC PPM ports
` [PATCH net-next v3 4/5] arm64: dts: s32n79-rdb: enable NETC IEP18

[PATCH] pinctrl: imx: scmi: replace custom dt_free_map with pinctrl_utils_free_map
 2026-11-04 13:45 UTC  (2+ messages)

[PATCH] dt-bindings: Use hex unit address patterns
 2026-11-04 13:26 UTC  (6+ messages)

[PATCH 1/1] spi: use dmaengine_desc_set_callback()
 2026-11-04 13:23 UTC  (7+ messages)

[PATCH 1/1] i2c: use dmaengine_get_dma_device() instead of chan->device->dev
 2026-11-04 12:56 UTC  (2+ messages)

[PATCH] pinctrl: imx: Use of_device_id match table for per-SoC data
 2026-11-04 12:54 UTC  (2+ messages)

[PATCH] ASoC: imx-audmux: Convert to subsys_platform_driver()
 2026-11-04 12:19 UTC  (3+ messages)

[PATCH 1/2] i2c: imx-lpi2c: fix SMBus block read with PEC
 2026-11-04 12:10 UTC  (2+ messages)
` [PATCH 2/2] i2c: imx-lpi2c: don't treat a NACK in SMBus block read as an error

[PATCH] dmaengine: Convert to subsys_platform_driver()
 2026-11-04 12:00 UTC  (2+ messages)

[PATCH 1/1] mmc: use dmaengine_desc_set_callback()
 2026-11-04 11:55 UTC  (5+ messages)

[PATCH v3 1/9] media: omap3isp: hist: use dmaengine_submit() instead of ->tx_submit()
 2026-11-04 11:43 UTC  (10+ messages)
` [PATCH v3 2/9] media: mgb4: use dmaengine_desc_set_callback()
` [PATCH v3 3/9] media: intel: pxa_camera: "
` [PATCH v3 4/9] media: m2m-deinterlace: "
` [PATCH v3 5/9] media: renesas: rcar_drif: "
` [PATCH v3 6/9] media: ti: j721e-csi2rx: "
` [PATCH v3 7/9] media: ti: omap: "
` [PATCH v3 8/9] media: xilinx: "
` [PATCH v3 9/9] media: pxa_camera: use cookie returned by dmaengine_submit() for logging

[PATCH] ASoC: fsl: imx-sgtl5000: release codec clock right after reading its rate
 2026-11-04 10:48 UTC 

[PATCH v15 0/2] clk: scmi: fix the i.MX OEM spread spectrum configuration
 2026-11-04 10:36 UTC  (3+ messages)
` [PATCH v15 1/2] clk: scmi: fix SSC spread conversion
` [PATCH v15 2/2] clk: scmi: reject SSC configuration out of the OEM field range

[PATCH] ASoC: fsl: imx-sgtl5000: drop codec device reference after probe
 2026-11-04 10:08 UTC  (2+ messages)

[PATCH v10 00/11] Add S32N79RDB UFS support
 2026-11-04  9:41 UTC  (13+ messages)
` [PATCH v10 01/11] ufs: core: Return a negative errno from WLUN suspend/resume
` [PATCH v10 03/11] ufs: unipro: Move Tx/Rx FSM state definitions to unipro.h
` [PATCH v10 04/11] ufs: unipro: Add TX/RX FSM state attributes
` [PATCH v10 08/11] dt-bindings: ufs: Add NXP S32N79 UFS host controller
` [PATCH v10 10/11] ufs: s32n7: Add NXP S32N79 UFS host controller driver

[PATCH net-next 0/4] net: enetc: add i.MX952 NETC v4.6 support
 2026-11-04  9:43 UTC  (6+ messages)
` [PATCH net-next 1/4] dt-bindings: net: netc-blk-ctrl: add compatible string for i.MX952 platforms
` [PATCH net-next 2/4] net: enetc: add i.MX952 NETC blocks control support
` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support
` [PATCH net-next 4/4] ptp: netc: use 133MHz as the default reference clock rate for i.MX952

[PATCH] net: dma: use dmaengine_desc_set_callback()
 2026-11-04  9:03 UTC  (5+ messages)

[PATCH 1/1] tty: replace chan->device->dev with dmaengine_get_provider_device()
 2026-11-04  8:47 UTC  (3+ messages)

[PATCH 1/1] spi: replace chan->device->dev with dmaengine_get_provider_device()
 2026-11-04  8:46 UTC  (2+ messages)

[PATCH 1/1] PCI: replace chan->device->dev with dmaengine_get_provider_device()
 2026-11-04  8:30 UTC  (2+ messages)

[PATCH v7 00/10] irqchip/imx-irqsteer: Allow building as module
 2026-11-04  8:03 UTC  (13+ messages)
` [PATCH v7 01/10] irqchip/imx-irqsteer: Call chained_irq_exit() on the handler error path
` [PATCH v7 02/10] irqchip/imx-irqsteer: Validate IRQ count before creating domain
` [PATCH v7 03/10] irqchip/imx-irqsteer: Dispose of parent IRQ mappings in remove()
` [PATCH v7 04/10] irqchip/imx-irqsteer: Convert to devm_pm_runtime_set_active_enabled()
` [PATCH v7 05/10] irqchip/imx-irqsteer: Mask all interrupts in probe()
` [PATCH v7 06/10] irqchip/imx-irqsteer: Let devres own the clock
` [PATCH v7 07/10] irqchip/imx-irqsteer: Allow building as module
` [PATCH v7 08/10] irqchip/imx-irqsteer: Dispose of child IRQ mappings in remove()
` [PATCH v7 09/10] genirq/irqdomain: Add devm_irq_domain_create_linear()
` [PATCH v7 10/10] irqchip/imx-irqsteer: Use devm_irq_domain_create_linear()

[PATCH 00/10] Update BSH SystemMaster device trees and add SMM-M2B support
 2026-11-04  7:55 UTC  (15+ messages)
` [PATCH 01/10] dt-bindings: arm: fsl: Add BSH SMM-M2B board
` [PATCH 02/10] dts: imx: Use minimum NAND ECC strength on BSH boards
` [PATCH 03/10] ARM: dts: imx6ulz: Enable RNGB on BSH SMM-M2
` [PATCH 04/10] ARM: dts: imx6ulz: Adjust BSH SMM-M2 Wi-Fi and Bluetooth pin settings
` [PATCH 05/10] ARM: dts: imx6ulz: Fix BSH SMM-M2 WLAN host wake configuration
` [PATCH 06/10] ARM: dts: imx6ulz: Factor out BSH SMM-M2 common device tree
` [PATCH 07/10] ARM: dts: imx6ulz: Add BSH SMM-M2B board support
` [PATCH 08/10] ARM: dts: imx6ulz: Configure UART2 pins on BSH SMM-M2 variants
` [PATCH 09/10] dts: imx: Enable USB OTG mode on BSH SMM-M2 and SMM-S2
` [PATCH 10/10] ARM: dts: imx6ulz: Add SPI display and touch overlay for BSH SMM-M2

[PATCH] soc: imx8m: drop the clock reference if enabling it fails
 2026-11-04  7:13 UTC  (2+ messages)

[PATCH] soc: imx8m: unregister the soc and cpufreq devices if action setup fails
 2026-11-04  7:13 UTC  (2+ messages)

[PATCH v2 0/2] Add Amlogic A9 I3C support
 2026-11-04  5:18 UTC  (13+ messages)
` [PATCH v2 1/2] i3c: master: svc: Add amlogic a9 support
` [PATCH v2 2/2] dt-bindings: i3c: silvaco,i3c-master: Add Amlogic A9 support

[PATCH v3 0/4] arm64: dts: freescale: Add IMX-AUD-IO add-on board support
 2026-11-04  3:33 UTC  (5+ messages)
` [PATCH v3 1/4] dt-bindings: connector: Add fsl,aud-io-slot binding

[PATCH v6 net-next 0/9] net: dsa: netc: add PTP support for NETC switch
 2026-11-04  2:58 UTC  (4+ messages)
` [PATCH v6 net-next 9/9] net: dsa: netc: add PTP one-step timestamping support

[PATCH] ASoC: mxs-saif: unregister the mclk if adding the provider fails
 2026-11-04  2:49 UTC  (2+ messages)

[PATCH] drm/bridge: imx8qxp-pxl2dpi: put the companion bridge on the dual-link error
 2026-11-04  2:40 UTC 

[PATCH] ASoC: fsl: imx-card: fix DT node reference leak on unbind
 2026-11-04  2:40 UTC 

[PATCH] ASoC: fsl: imx-audio-rpmsg: unregister platform devices on probe failure
 2026-11-04  2:40 UTC 

[PATCH 1/1] iio: use dmaengine_desc_set_callback()
 2026-11-04  2:07 UTC  (3+ messages)

[PATCH] usb: chipidea: otg: avoid workqueue resource leak if otg fsm init fail
 2026-11-04  1:13 UTC  (2+ messages)

[PATCH 1/1] ASoC/sound: use dmaengine_desc_set_callback()
 2026-11-03 23:53 UTC  (2+ messages)

[PATCH] dt-bindings: display: imx: Document fsl,pcr
 2026-11-03 22:55 UTC  (2+ messages)

[PATCH v2 1/1] usb: renesas_usbhs: use dmaengine_get_dma_device() instead of chan->device->dev
 2026-11-03 22:05 UTC 

[PATCH 1/1] soc: fuse-tegra20: replace chan->device->dev with dmaengine_get_provider_device()
 2026-11-03 21:56 UTC 

[PATCH 1/1] ata: replace chan->device->dev with dmaengine_get_provider_device()
 2026-11-03 21:39 UTC  (2+ messages)

[PATCH 1/1] nvme: replace chan->device->dev with dmaengine_get_provider_device()
 2026-11-03 21:28 UTC 

[PATCH net-next v1 0/5] net: deprecate skb->pp_recycle and skb_mark_for_recycle()
 2026-11-03 21:14 UTC  (6+ messages)
` [PATCH net-next v1 1/5] net: skbuff: skip managed zerocopy frags in skb_frag_ref()
` [PATCH net-next v1 2/5] net: skbuff: refcount spliced page_pool frags via skb_pipe_buf_ops
` [PATCH net-next v1 3/5] net: datagram: refcount page_pool frags in zerocopy_fill_skb_from_iter()
` [PATCH net-next v1 4/5] net: remove skb->pp_recycle and consolidate netmem refcounting
` [PATCH net-next v1 5/5] net: remove skb_mark_for_recycle()

[PATCH v9 0/8] serial: 8250: serialize DMA cancellation with buffer reuse
 2026-11-03 20:59 UTC  (28+ messages)
` [PATCH v9 1/8] serial: 8250_omap: separate locked TX DMA completion processing
` [PATCH v9 2/8] serial: serialize asynchronous write wakeups with the port lock
` [PATCH v9 3/8] serial: 8250_omap: serialize RX DMA completion and flushing
` [PATCH v9 4/8] serial: 8250_omap: quiesce DMA IRQ handling before shutdown
` [PATCH v9 5/8] serial: core: allow drivers to reserve flushed transmit storage
` [PATCH v9 6/8] serial: 8250: drain canceled TX DMA before reusing its buffer
` [PATCH v9 7/8] serial: 8250: retire canceled RX DMA before reusing the receive buffer
` [PATCH v9 8/8] serial: 8250: retain DMA resources when termination fails

[PATCH v2 0/5] lx2160a: change the pad muxes through the RCW override
 2026-11-03 20:20 UTC  (8+ messages)
` [PATCH v2 1/5] dt-bindings: pinctrl: add the NXP LX2160A RCW pad mux
` [PATCH v2 2/5] dt-bindings: soc: fsl: layerscape-dcfg: add the LX2160A pad-mux child
` [PATCH v2 3/5] soc: fsl: guts: add the RCW override of any RCWSR
` [PATCH v2 4/5] pinctrl: freescale: add the LX2160A RCW pad-mux driver
` [PATCH v2 5/5] arm64: dts: lx2160a: describe the pad muxes as the DCFG RCW override

[PATCH v2 0/7] async_tx: use DMA Engine APIs
 2026-11-03 19:52 UTC  (8+ messages)
` [PATCH v2 1/7] async_tx: use dmaengine_desc_set_callback()
` [PATCH v2 2/7] async_tx: replace direct ->device_prep*() calls with standard DMA engine API
` [PATCH v2 3/7] async_tx: use dmaengine_get_dma_device() instead of chan->device->dev
` [PATCH v2 4/7] async_tx: use dmaengine_prep_dma_(pq|pq_val|interrupt|xor) instead of direct callback
` [PATCH v2 5/7] async_tx: convert to dmaengine_is_*_aligned() helpers
` [PATCH v2 6/7] async_tx: replace open-coded cap_mask accesses with dmaengine_has_cap()
` [PATCH v2 7/7] async_tx: Mark as Deprecated in Kconfig

[PATCH 00/35] drm/panel: let the panels use the atomic state
 2026-11-03 18:44 UTC  (5+ messages)
` [PATCH 07/35] drm: rcar-du: use devm_drm_panel_bridge_add()
` [PATCH 08/35] drm: rz-du: "

[PATCH v2 0/2] remoteproc: elf_loader: Make rproc_elf_load_segments() more generic
 2026-11-03 17:49 UTC  (4+ messages)
` [PATCH v2 1/2] remoteproc: elf_loader: Create new callback for copying segments to remote cpu

[PATCH 0/5] lx2160a: change the pad muxes through the RCW override
 2026-11-03 16:40 UTC  (4+ messages)
` [PATCH 1/5] dt-bindings: pinctrl: add the NXP LX2160A RCW pad mux

[PATCH 1/1] i2c: use dmaengine_desc_set_callback()
 2026-11-03 16:39 UTC  (2+ messages)

[PATCH 1/1] crypto: use dmaengine_desc_set_callback()
 2026-11-03 16:21 UTC  (2+ messages)

[PATCH v2 1/1] mfd: stm32-timers: Use dmaengine_desc_set_callback()
 2026-11-03 15:50 UTC 

[PATCH v4 0/7] dmaengine: add DMA channel bus and fsl-edma per-channel IOMMU support
 2026-11-03 15:34 UTC  (10+ messages)
` [PATCH v4 1/7] dmaengine: fsl-edma: unregister channels before vchan cleanup
` [PATCH v4 2/7] dmaengine: add a bus for DMA channel devices
` [PATCH v4 3/7] iommu: register the DMA channel bus for IOMMU notifications
` [PATCH v4 4/7] dmaengine: move channel devices to the DMA channel bus
` [PATCH v4 5/7] dt-bindings: dma: fsl,edma: add per-channel child node support
` [PATCH v4 6/7] dmaengine: fsl-edma: support per-channel DT child nodes
` [PATCH v4 7/7] arm64: dts: imx95: convert eDMA to per-channel "

[PATCH v2 1/1] ntb: use dmaengine_desc_set_callback()
 2026-11-03 14:41 UTC 

[PATCH v2 1/1] rapidio: use dmaengine_desc_set_callback()
 2026-11-03 14:37 UTC 

[PATCH v2 00/11] gpio: vf610: fix clocks and misc cleanup
 2026-11-03 14:19 UTC  (7+ messages)
` [PATCH v2 01/11] dt-bindings: gpio: vf610: fix clock requirements per SoC

[PATCH v3 6/7] dmaengine: fsl-edma: support per-channel DT child nodes
 2026-11-03 14:01 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox