[PATCH net-next v2] net: stmmac: imx: use stmmac_pltfr_probe()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Using stmmac_pltfr_probe() simplifies the probe function. This will not
only call plat_dat->init (imx_dwmac_init), but also plat_dat->exit
(imx_dwmac_exit) appropriately if stmmac_dvr_probe() fails. This
results in an overall simplification of the glue driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index 5d279fa54b3e..889e2bb6f7f5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -379,10 +379,6 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = imx_dwmac_init(pdev, dwmac);
-	if (ret)
-		goto err_dwmac_init;
-
 	if (dwmac->ops->fix_mac_speed) {
 		plat_dat->fix_mac_speed = dwmac->ops->fix_mac_speed;
 	} else if (!dwmac->ops->mac_rgmii_txclk_auto_adj) {
@@ -392,16 +388,10 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 
 	dwmac->plat_dat->fix_soc_reset = dwmac->ops->fix_soc_reset;
 
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	ret = stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
 	if (ret)
-		goto err_drv_probe;
-
-	return 0;
+		imx_dwmac_clks_config(dwmac, false);
 
-err_drv_probe:
-	imx_dwmac_exit(pdev, plat_dat->bsp_priv);
-err_dwmac_init:
-	imx_dwmac_clks_config(dwmac, false);
 	return ret;
 }
 
-- 
2.30.2