Re: [PATCH v2 7/8] reset: imx8mp-audiomix: Add support for DSP run/stall

[Frank Li <Frank.li@nxp.com>]

On Wed, Feb 19, 2025 at 09:21:01PM +0200, Daniel Baluta wrote:
> We can Run/Stall the DSP via audio block control bits found in audiomix.
> Implement this functionality using the reset controller and use assert
> for Stall and deassert for Run.
>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/reset/reset-imx8mp-audiomix.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
> index 42539cafbccc..4a713b772429 100644
> --- a/drivers/reset/reset-imx8mp-audiomix.c
> +++ b/drivers/reset/reset-imx8mp-audiomix.c
> @@ -16,6 +16,9 @@
>  #define IMX8MP_AUDIOMIX_EARC_RESET_MASK		BIT(1)
>  #define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK	BIT(2)
>
> +#define IMX8MP_AUDIOMIX_DSP_OFFSET		0x108
> +#define IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK	BIT(5)
> +
>  struct imx8mp_reset_map {
>  	unsigned int offset;
>  	unsigned int mask;
> @@ -33,6 +36,11 @@ static const struct imx8mp_reset_map reset_map[] = {
>  		.mask	= IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK,
>  		.active_low = true,
>  	},
> +	[IMX8MP_AUDIOMIX_DSP] = {
> +		.offset	= IMX8MP_AUDIOMIX_DSP_OFFSET,
> +		.mask	= IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK,
> +		.active_low = false,
> +	},
>  };
>
>  struct imx8mp_audiomix_reset {
> --
> 2.25.1
>