Re: [PATCH v4] cpuidle: Init cpuidle only for present CPUs

[Sudeep Holla <sudeep.holla@arm.com>]

On Fri, Mar 07, 2025 at 04:03:03PM +0800, Jacky Bai wrote:
> for_each_possible_cpu() is currently used to initialize cpuidle
> in below cpuidle drivers:
>   drivers/cpuidle/cpuidle-arm.c
>   drivers/cpuidle/cpuidle-big_little.c
>   drivers/cpuidle/cpuidle-psci.c
>   drivers/cpuidle/cpuidle-riscv-sbi.c
> 
> However, in cpu_dev_register_generic(), for_each_present_cpu()
> is used to register CPU devices which means the CPU devices are
> only registered for present CPUs and not all possible CPUs.
> 
> With nosmp or maxcpus=0, only the boot CPU is present, lead
> to the failure:
> 
>   |  Failed to register cpuidle device for cpu1
> 
> Then rollback to cancel all CPUs' cpuidle registration.
> 
> Change for_each_possible_cpu() to for_each_present_cpu() in the
> above cpuidle drivers to ensure it only registers cpuidle devices
> for CPUs that are actually present.
> 
> Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES")
> Reviewed-by: Dhruva Gole <d-gole@ti.com>
> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
> Tested-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> ---
>  - v4 changes:
>   - add changes for other cpuidle driver that has the similar issue
>     as cpuidle-pcsi driver.
> 
>  - v3 changes:
>   - improve the changelog as suggested by Sudeep
> ---
>  drivers/cpuidle/cpuidle-arm.c        | 8 ++++----
>  drivers/cpuidle/cpuidle-big_little.c | 2 +-
>  drivers/cpuidle/cpuidle-psci.c       | 4 ++--
>  drivers/cpuidle/cpuidle-riscv-sbi.c  | 4 ++--


Why have you spared drivers/cpuidle/cpuidle-qcom-spm.c ? IIUC the issue
exists there as well.

-- 
Regards,
Sudeep