Re: [PATCH v4 0/5] PCI: dwc: Add common pme_turn_off message by using outbound iATU

[Frank Li <Frank.li@nxp.com>]

On Mon, Feb 26, 2024 at 12:24:02PM -0500, Frank Li wrote:
> On Mon, Feb 19, 2024 at 10:16:20AM -0500, Frank Li wrote:
> > On Tue, Feb 13, 2024 at 04:50:21PM -0500, Frank Li wrote:
> > > Involve an new and common mathod to send pme_turn_off() message. Previously
> > > pme_turn_off() implement by platform related special register to trigge    
> > > it.                                                                        
> > 
> > @mani:l
> > 
> > 	Do you have chance look this patches. Actually other patches
> > already reviewed. Only missed
> > 
> > 	PCI: dwc: Add common send PME_Turn_Off message method
> > 	PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro
> > 
> > 	This patch will reduce customer's PME_Turn_off method. Many code
> > can be cleaned after this.
> 
> @mani and @lpieralisi
> 
> 	Do you have chance to look these?

@mani, @lpieralisi and @Bjorn

Any comments? It will benefit for all dwc platform. If this method
accepted, we can remove all customized PME send function at difference
platform.

Frank


> 
> Frank
> 
> > 
> > Frank Li
> > 
> > >                                                                            
> > > But Yoshihiro give good idea by using iATU to send out message. Previously 
> > > Yoshihiro provide patches to raise INTx message by dummy write to outbound 
> > > iATU.                                                                      
> > >                                                                            
> > > Use similar mathod to send out pme_turn_off message.                       
> > >                                                                            
> > > Previous two patches is picked from Yoshihiro' big patch serialise.        
> > >  PCI: dwc: Change arguments of dw_pcie_prog_outbound_atu()                 
> > >  PCI: Add INTx Mechanism Messages macros                                   
> > >                                                                            
> > > PCI: Add PME_TURN_OFF message macro                                        
> > > dt-bindings: PCI: dwc: Add 'msg" register region, Add "msg" region to use  
> > > to map PCI msg.                                                            
> > >                                                                            
> > > PCI: dwc: Add common pme_turn_off message method                           
> > > Using common pme_turn_off() message if platform have not define their.
> > > 
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > > Changes in v4:
> > > - Remove dt-binding patch. Needn't change any dts file and binding doc.
> > >   Reserve a region at end of first IORESOURCE_MEM window by call
> > >   request_resource(). So PCIe stack will not use this reserve region to any
> > > PCIe devices.
> > >   I tested it by reserve at begin of IORESOURCE_MEM window. PCIe stack
> > > will skip it as expection.
> > > 
> > >   Fixed a issue, forget set iATU index when sent PME_turn_off.
> > > 
> > > - Link to v3: https://lore.kernel.org/r/20240202-pme_msg-v3-0-ff2af57a02ad@nxp.com
> > > 
> > > Changes in v3:
> > > - fix 'MSG"
> > > - Add pcie spec ref in head file
> > > - using function name dw_pci_pme_turn_off()
> > > - Using PCIE_ prefix macro
> > > - Link to v2: https://lore.kernel.org/r/20240201-pme_msg-v2-0-6767052fe6a4@nxp.com
> > > 
> > > Changes in v2:
> > >   - Add my sign off at PCI: dwc: Add outbound MSG TLPs support
> > >   - Add Bjorn review tag at  Add INTx Mechanism Messages macros
> > >   - using PME_Turn_Off match PCIe spec
> > >   - ref to pcie spec v6.1
> > >   - using section number.
> > > 
> > > - Link to v1: https://lore.kernel.org/r/20240130-pme_msg-v1-0-d52b0add5c7c@nxp.com
> > > 
> > > ---
> > > Frank Li (2):
> > >       PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro
> > >       PCI: dwc: Add common send PME_Turn_Off message method
> > > 
> > > Yoshihiro Shimoda (3):
> > >       PCI: Add INTx Mechanism Messages macros
> > >       PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure
> > >       PCI: dwc: Add outbound MSG TLPs support
> > > 
> > >  drivers/pci/controller/dwc/pcie-designware-ep.c   |  21 ++--
> > >  drivers/pci/controller/dwc/pcie-designware-host.c | 145 +++++++++++++++++++---
> > >  drivers/pci/controller/dwc/pcie-designware.c      |  54 ++++----
> > >  drivers/pci/controller/dwc/pcie-designware.h      |  21 +++-
> > >  drivers/pci/pci.h                                 |  20 +++
> > >  5 files changed, 197 insertions(+), 64 deletions(-)
> > > ---
> > > base-commit: e08fc59eee9991afa467d406d684d46d543299a9
> > > change-id: 20240130-pme_msg-dd2d81ee9886
> > > 
> > > Best regards,
> > > -- 
> > > Frank Li <Frank.Li@nxp.com>
> > >