Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>, Peng Fan <peng.fan@nxp.com>,
	Liu Ying <victor.liu@nxp.com>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v8 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example
Date: Tue, 13 Jan 2026 15:18:41 -0500	[thread overview]
Message-ID: <aWaoofPmf/ilpObi@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260113-v6-18-topic-imx93-parallel-display-v8-1-4abccdc473a5@pengutronix.de>

On Tue, Jan 13, 2026 at 08:07:27PM +0100, Marco Felsch wrote:
> From: Liu Ying <victor.liu@nxp.com>
>
> i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Document the Parallel Display Format Configuration(PDFC) subnode
> and add the subnode to example.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> [m.felsch@pengutronix.de: port to v6.18-rc1]
> [m.felsch@pengutronix.de: add bus-width]
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 79 ++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index 34aea58094e55365a2f9c86092f637e533f954ff..82d30e4140f4d511bc59665370d561efe7a707bd 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -40,6 +40,58 @@ properties:
>      minItems: 8
>      maxItems: 10
>
> +  dpi-bridge:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - nxp,imx91-pdfc
> +          - nxp,imx93-pdfc
> +
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +
> +        properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Input port node to receive pixel data.
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/$defs/port-base
> +            unevaluatedProperties: false
> +            description: Output port node to downstream pixel data receivers.
> +
> +            properties:
> +              endpoint:
> +                $ref: /schemas/media/video-interfaces.yaml#
> +                unevaluatedProperties: false
> +
> +                properties:
> +                  bus-width:
> +                    enum: [ 16, 18, 24 ]
> +                    description:
> +                      Specify the physical parallel bus width.
> +
> +                      This property is optional if the display bus-width
> +                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> +                      is connected and all 18-bit data lines are muxed to the
> +                      parallel-output pads.
> +
> +                      This property must be set to 18 to cut only the LSBs
> +                      instead of the MSBs in case a 24-bit RGB888 display is
> +                      connected and only the lower 18-bit data lanes are muxed
> +                      to the parallel-output pads.
> +
> +        required:
> +          - port@0
> +          - port@1
> +
> +    required:
> +      - compatible
> +      - ports
> +
>  allOf:
>    - if:
>        properties:
> @@ -81,6 +133,7 @@ allOf:
>              - const: isi
>              - const: csi
>              - const: dsi
> +

remove this unnecessary changes

Frank
>  required:
>    - compatible
>    - reg
> @@ -112,4 +165,30 @@ examples:
>                 clock-names = "apb", "axi", "nic", "disp", "cam",
>                               "pxp", "lcdif", "isi", "csi", "dsi";
>        #power-domain-cells = <1>;
> +
> +      dpi-bridge {
> +        compatible = "nxp,imx93-pdfc";
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +
> +            pdfc_from_lcdif: endpoint {
> +              remote-endpoint = <&lcdif_to_pdfc>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +
> +            pdfc_to_panel: endpoint {
> +              remote-endpoint = <&panel_from_pdfc>;
> +              bus-width = <18>;
> +            };
> +          };
> +        };
> +      };
>      };
>
> --
> 2.47.3
>

  reply	other threads:[~2026-01-13 20:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-13 19:07 [PATCH v8 0/3] Add i.MX91/93 parallel display support Marco Felsch
2026-01-13 19:07 ` [PATCH v8 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example Marco Felsch
2026-01-13 20:18   ` Frank Li [this message]
2026-01-14  6:44     ` Marco Felsch
2026-01-13 19:07 ` [PATCH v8 2/3] drm/bridge: imx: Add i.MX93 parallel display format configuration support Marco Felsch
2026-01-14  8:02   ` Luca Ceresoli
2026-01-15 14:11     ` Marco Felsch
2026-01-13 19:07 ` [PATCH v8 3/3] arm64: dts: imx93: Add parallel display output nodes Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aWaoofPmf/ilpObi@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=peng.fan@nxp.com \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox