Re: [PATCH v3 1/6] arm64: dts: imx8mm: imx8mp: Add LVDS DTOs for Data Modul i.MX8M Mini and Plus eDM SBC

[Frank Li <Frank.li@nxp.com>]

On Fri, May 08, 2026 at 01:21:43PM +0200, Marek Vasut wrote:
> On 4/7/26 11:17 PM, Marek Vasut wrote:
> > Add DT overlay for the DSI-to-LVDS adapter eDM-MOD-iMX8Mm-LVDS populated
> > with Lontium LT9211 bridge. This adapter can be optionally populated onto
> > the eDM SBC. This adapter can be extended with multiple panels, currently
> > supported are the following:
> >
> > - AUO G215HVN011
> > - Innolux G070Y2-L01
> > - Innolux G101ICE-L01
> > - Innolux G121XCE-L01
> > - Innolux G156HCE-L01
> > - Multi-Inno Technology MI0700A2T-30
> > - Multi-Inno Technology MI1010Z1T-1CP11
> >
> > Note that in case of the i.MX8M Plus eDM SBC, the adapter name containing
> > iMX8Mm is not a typo, this is the adapter model string. The adapter was
> > originally developed for the iMX8Mm eDM SBC.
>
> Hello Frank,
>
> this patchset is now split. How can we proceed ?

I am thinking about it. I found an old thread
https://lore.kernel.org/linux-devicetree/20250902105710.00512c6d@booty/

The current code base already supportted partitial of it, such as gpio and
irq map for connector.

Internal chancel liu have prepared version by use nexus mapping for audio
boards, which almost done to send out to review.

I want to wait for a little bit well to resolve or partitial resolve N x M
problem.

Frank

>
> Thank you for your help!