Re: [PATCH v3 0/4] remoteproc: add Cortex-A Core remoteproc support on i.MX platforms

[Peng Fan <peng.fan@oss.nxp.com>]

Hi Jiafei,

On Mon, May 11, 2026 at 10:39:24AM +0800, Jiafei Pan wrote:
>This patch series is to add remoteproc support on Cortex-A Core of i.MX platforms:
>1. Adding dts binding for Cortex-A Core remoteproc
>2. Enable Cortex-A Core remoteproc support in remoteproc driver
>3. Adding dts example on imx93 platforms.

Normally, we only keep one patch or patch series from the same author that
modifies the same file in the review queue at a time.

You already have a patch for imx_rproc.c currently under review(got R-b, but
need Mathieu to handle), so this patch series might be delayed to be reviewed.

As I have replied in internal, to make multiple OS run on Cortex-A SMP without
hypervsior, some GIC changes are required, without those GIC changes,
this patchset is not testable using upstream tree.

Thanks,
Peng

>
>Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
>
>---
>Changes in v3:
>- Fixed dt_binding_check warnings
>- Updated prefix of patch subject
>
>Changes in v2:
>- Update arch/arm64/boot/dts/freescale/Makefile to add new dts
>
>---
>Hou Zhiqiang (1):
>  remoteproc: imx_rproc: add autoboot support for A-core
>
>Jiafei Pan (3):
>  dt-bindings: remoteproc: add imx-rproc-psci
>  remoteproc: imx_rproc: add support for Cortex-A Core
>  arm64: dts: imx93: Cortex-A Core remoteproc device node
>
> .../remoteproc/fsl,imx-rproc-psci.yaml        |  51 ++++++
> arch/arm64/boot/dts/freescale/Makefile        |   2 +
> .../imx93-11x11-evk-multicore-rtos.dts        |  39 +++++
> .../imx93-14x14-evk-multicore-rtos.dts        |  39 +++++
> .../boot/dts/freescale/imx93-rproc-ca55.dtsi  |  14 ++
> drivers/remoteproc/imx_rproc.c                | 150 ++++++++++++++++++
> drivers/remoteproc/imx_rproc.h                |   2 +
> 7 files changed, 297 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc-psci.yaml
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk-multicore-rtos.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-14x14-evk-multicore-rtos.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-rproc-ca55.dtsi
>
>-- 
>2.43.0
>