Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Peng Fan <peng.fan@oss.nxp.com>
To: sashiko-reviews@lists.linux.dev
Cc: imx@lists.linux.dev, Frank.Li@kernel.org
Subject: Re: [PATCH v4 1/2] pmdomain: imx: Fix i.MX8MP power notifier
Date: Thu, 11 Jun 2026 10:01:49 +0800	[thread overview]
Message-ID: <aioXDdYIRrF+9zSZ@shlinux89> (raw)
In-Reply-To: <20260610133615.1B8211F00893@smtp.kernel.org>

On Wed, Jun 10, 2026 at 01:36:14PM +0000, sashiko-bot@kernel.org wrote:
>Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
>- [High] The `imx8mp_vpu_power_notifier` fails to ungate the NoC clock (bit 3) and omits `GENPD_NOTIFY_PRE_OFF` handling, which contradicts the commit message and breaks the ADB handshake logic during power transitions.
>--
>
>commit b6702343f03cbdda69190bd48f95c1b0b1fe3617
>Author: Peng Fan <peng.fan@nxp.com>
>
>pmdomain: imx: Fix i.MX8MP power notifier
>
>Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
>the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
>but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
>imx8mp_vpu_power_notifier() for i.MX8MP.
>
>> diff --git a/drivers/pmdomain/imx/imx8m-blk-ctrl.c b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
>> index 19e992d2ee3b8..e13a47eeed75d 100644
>> --- a/drivers/pmdomain/imx/imx8m-blk-ctrl.c
>> +++ b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
>[ ... ]
>> @@ -514,9 +514,34 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_vpu_blk_ctl_domain_data[]
>>  	},
>>  };
>>  
>> +static int imx8mp_vpu_power_notifier(struct notifier_block *nb,
>> +				     unsigned long action, void *data)
>> +{
>> +	struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
>> +						 power_nb);
>> +
>> +	if (action == GENPD_NOTIFY_ON) {
>
>[Severity: High]
>The commit message states there is a separate gate (bit 3) for the NoC on
>i.MX8MP, but does this implementation actually ungate it?
>
>It looks like the NoC clock (bit 3) is never ungated here. Also, there is no
>handling for the GENPD_NOTIFY_PRE_OFF action.

This is expected, keep bit 3 always in hardware default state. No need
to handle GENPD_NOTIFY_PRE_OFF

Regards
Peng

>
>During both power up and power down transitions, the GPC driver waits for an
>ADB handshake. Without explicitly enabling the NoC clock, won't the hardware
>state machine lack the necessary clock to respond to the GPC, potentially
>stalling the handshake and deadlocking the system during domain transitions?
>
>> +		/*
>> +		 * On power up we have no software backchannel to the GPC to
>> +		 * wait for the ADB handshake to happen, so we just delay for a
>> +		 * bit. On power down the GPC driver waits for the handshake.
>> +		 */
>> +
>> +		udelay(5);
>> +
>> +		/* set "fuse" bits to enable the VPUs */
>> +		regmap_set_bits(bc->regmap, 0x8, 0xffffffff);
>> +		regmap_set_bits(bc->regmap, 0xc, 0xffffffff);
>> +		regmap_set_bits(bc->regmap, 0x10, 0xffffffff);
>> +		regmap_set_bits(bc->regmap, 0x14, 0xffffffff);
>> +	}
>> +
>> +	return NOTIFY_OK;
>> +}
>
>-- 
>Sashiko AI review · https://sashiko.dev/#/patchset/20260610-b4-imx8mp-vc8000e-pm-v4-1-v4-0-ea58ce929c84@nxp.com?part=1

  reply	other threads:[~2026-06-11  1:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-10 14:39 [PATCH v4 0/2] pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Peng Fan (OSS)
2026-06-10 14:39 ` [PATCH v4 1/2] pmdomain: imx: Fix i.MX8MP power notifier Peng Fan (OSS)
2026-06-10 13:36   ` sashiko-bot
2026-06-11  2:01     ` Peng Fan [this message]
2026-06-10 14:39 ` [PATCH v4 2/2] pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Peng Fan (OSS)
2026-06-10 13:34   ` sashiko-bot
2026-06-11  2:02     ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aioXDdYIRrF+9zSZ@shlinux89 \
    --to=peng.fan@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox