Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: guoniu.zhou@oss.nxp.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Frank Li <Frank.Li@nxp.com>,
	Martin Kepplinger-Novakovic <martink@posteo.de>,
	Rui Miguel Silva <rmfrfs@gmail.com>,
	Purism Kernel Team <kernel@puri.sm>,
	Bryan O'Donoghue <bod@kernel.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	imx@lists.linux.dev, linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Alice Yuan <alice.yuan@nxp.com>
Subject: Re: [PATCH] media: imx-mipi-csis: add support for MEDIA_BUS_FMT_YUYV8_1X16
Date: Mon, 12 Oct 2026 14:37:57 -0500	[thread overview]
Message-ID: <as03FYJTi__INJZL@SMW015318> (raw)
In-Reply-To: <20261009-csis_sam-v1-1-81f2b0fb76ef@oss.nxp.com>

On Fri, Oct 09, 2026 at 06:58:41PM +0800, guoniu.zhou@oss.nxp.com wrote:
> From: Alice Yuan <alice.yuan@nxp.com>
>
> Add MEDIA_BUS_FMT_YUYV8_1X16 to the list of supported bus formats.
>
> The format uses the same CSI-2 YUV422 8-bit data type and 16-bit
> parallel bus width as MEDIA_BUS_FMT_UYVY8_1X16, but with a different
> component ordering. Supporting YUYV allows sensors and bridge devices
> that output YUYV formatted YUV422 data to be used with the i.MX MIPI
> CSIS driver without requiring format conversion.
>
> Signed-off-by: Alice Yuan <alice.yuan@nxp.com>
> Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/media/platform/nxp/imx-mipi-csis.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> index 5f9691d76434..14a00b9fcedf 100644
> --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> @@ -382,6 +382,11 @@ static const struct csis_pix_format mipi_csis_formats[] = {
>  		.output = MEDIA_BUS_FMT_UYVY8_1X16,
>  		.data_type = MIPI_CSI2_DT_YUV422_8B,
>  		.width = 16,
> +	}, {
> +		.code = MEDIA_BUS_FMT_YUYV8_1X16,
> +		.output = MEDIA_BUS_FMT_YUYV8_1X16,
> +		.data_type = MIPI_CSI2_DT_YUV422_8B,
> +		.width = 16,
>  	},
>  	/* RGB formats. */
>  	{
>
> ---
> base-commit: b38d06ad1e13c32970d58039c154f009b81a3368
> change-id: 20261009-csis_sam-c5c10ed12322
>
> Best regards,
> --
> Guoniu Zhou <guoniu.zhou@oss.nxp.com>
>
>

      reply	other threads:[~2026-10-12 19:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-09 10:58 [PATCH] media: imx-mipi-csis: add support for MEDIA_BUS_FMT_YUYV8_1X16 guoniu.zhou
2026-10-12 19:37 ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=as03FYJTi__INJZL@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=alice.yuan@nxp.com \
    --cc=bod@kernel.org \
    --cc=festevam@gmail.com \
    --cc=guoniu.zhou@oss.nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=mchehab@kernel.org \
    --cc=rmfrfs@gmail.com \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox