Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH v7 09/12] gpio: mxc: add dev_err_probe() for error paths to help diagnostics
Date: Tue, 27 Oct 2026 09:13:27 -0500	[thread overview]
Message-ID: <auCxh1jBCI7JLEPf@SMW015318> (raw)
In-Reply-To: <20261027-gpio-mxc-cleanup-v7-4-v7-9-7b602d70c149@nxp.com>

On Tue, Oct 27, 2026 at 08:09:36PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Use dev_err_probe() on probe error paths that do not already report the
> failure, so that deferred probe reasons are recorded consistently.  Leave
> the devm_platform_ioremap_resource() and platform_get_irq() paths alone;
> those already log their errors.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/gpio/gpio-mxc.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index eeb7d36e6b44..f816822e36ad 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -484,7 +484,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	irq_count = platform_irq_count(pdev);
>  	if (irq_count < 0)
> -		return irq_count;
> +		return dev_err_probe(dev, irq_count, "Failed to count irq\n");
>
>  	if (irq_count > 1) {
>  		port->irq_high = platform_get_irq(pdev, 1);
> @@ -499,7 +499,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	/* the controller clock is optional */
>  	port->clk = devm_clk_get_optional_enabled(dev, NULL);
>  	if (IS_ERR(port->clk))
> -		return PTR_ERR(port->clk);
> +		return dev_err_probe(dev, PTR_ERR(port->clk), "Failed to get clk\n");
>
>  	pm_runtime_get_noresume(dev);
>
> @@ -532,7 +532,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	err = gpio_generic_chip_init(&port->gen_gc, &config);
>  	if (err)
> -		return err;
> +		return dev_err_probe(dev, err, "Failed to init gpio chip\n");
>
>  	port->gen_gc.gc.request = mxc_gpio_request;
>  	port->gen_gc.gc.free = mxc_gpio_free;
> @@ -548,7 +548,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	irq_base = devm_irq_alloc_descs(dev, -1, 0, 32, numa_node_id());
>  	if (irq_base < 0)
> -		return irq_base;
> +		return dev_err_probe(dev, irq_base, "Failed to alloc irq desc\n");
>
>  	d_info = (struct irq_domain_info) {
>  		.fwnode		= dev_fwnode(dev),
> @@ -561,14 +561,15 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	port->domain = devm_irq_domain_instantiate(dev, &d_info);
>  	if (IS_ERR(port->domain))
> -		return PTR_ERR(port->domain);
> +		return dev_err_probe(dev, PTR_ERR(port->domain),
> +				     "Failed to create irq domain\n");
>
>  	irq_domain_set_pm_device(port->domain, dev);
>
>  	/* gpio-mxc can be a generic irq chip */
>  	err = mxc_gpio_init_gc(port, irq_base);
>  	if (err < 0)
> -		return err;
> +		return dev_err_probe(dev, err, "Failed to init generic irq chip\n");
>
>  	/*
>  	 * Register the GPIO chip last: devm_gpiochip_add_data() makes the
> @@ -577,7 +578,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	 */
>  	err = devm_gpiochip_add_data(dev, &port->gen_gc.gc, port);
>  	if (err)
> -		return err;
> +		return dev_err_probe(dev, err, "Failed to add gpiochip data\n");
>
>  	list_add_tail(&port->node, &mxc_gpio_ports);
>
>
> --
> 2.51.0
>
>

  reply	other threads:[~2026-10-27 14:13 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-27 12:09 [PATCH v7 00/12] gpio: mxc: probe cleanup Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 01/12] gpio: mxc: use irq_set_irq_wake() to simplify code Peng Fan (OSS)
2026-10-27 14:09   ` Frank Li
2026-10-27 12:09 ` [PATCH v7 02/12] gpio: mxc: use for_each_set_bit() to iterate wakeup pads Peng Fan (OSS)
2026-10-27 16:35   ` Andy Shevchenko
2026-10-28 22:52   ` Linus Walleij
2026-10-27 12:09 ` [PATCH v7 03/12] gpio: mxc: use 'unsigned int' instead of bare 'unsigned' Peng Fan (OSS)
2026-10-27 14:10   ` Frank Li
2026-10-27 16:36   ` Andy Shevchenko
2026-10-27 12:09 ` [PATCH v7 04/12] gpio: mxc: replace of_device_is_compatible() with hwdata flags Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 05/12] gpio: mxc: convert pad wakeup compatible checks to " Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 06/12] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 07/12] gpio: mxc: use __free guard for runtime PM cleanup Peng Fan (OSS)
2026-10-27 14:12   ` Frank Li
2026-10-27 12:09 ` [PATCH v7 08/12] gpio: mxc: use devres functions to simplify probe code Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 09/12] gpio: mxc: add dev_err_probe() for error paths to help diagnostics Peng Fan (OSS)
2026-10-27 14:13   ` Frank Li [this message]
2026-10-27 12:09 ` [PATCH v7 10/12] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 11/12] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)
2026-10-27 12:09 ` [PATCH v7 12/12] MAINTAINERS: Add an entry for gpio-mxc Peng Fan (OSS)
2026-10-27 14:14   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=auCxh1jBCI7JLEPf@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=brgl@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox