Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Stefano Radaelli <stefano.radaelli21@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	pierluigi.p@variscite.com,
	Stefano Radaelli <stefano.r@variscite.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v1 1/1] arm64: dts: freescale: imx8mp-var: Add Cortex-M7 support
Date: Fri, 20 Nov 2026 11:07:59 -0600	[thread overview]
Message-ID: <awB-b1P9sX1FwNeT@SMW015318> (raw)
In-Reply-To: <20261120143241.17297-1-stefano.r@variscite.com>

On Fri, Nov 20, 2026 at 03:32:41PM +0100, Stefano Radaelli wrote:
> From: Stefano Radaelli <stefano.r@variscite.com>
>
> Add Cortex-M7 configurations for DART-MX8M-PLUS on Sonata,
> VAR-SOM-MX8M-PLUS on Symphony and VAR-SMARC-MX8M-PLUS on Echo.
>
> Share the reserved memory and remoteproc configuration through a common
> include, and add board overlays and combined -m7 DTBs for remoteproc and
> RPMsg support.
>
> Mark the UART, I2C, SPI and CAN controllers used by the Cortex-M7 firmware
> with "reserved" status. Disable PCIe on Symphony and USB-C on Echo,
> since their reset and role controllers depend on the I2C buses reserved
> for the M7.
>
> Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        | 13 ++++
>  .../dts/freescale/imx8mp-var-common-m7.dtsi   | 68 +++++++++++++++++++
>  .../freescale/imx8mp-var-dart-sonata-m7.dtso  | 31 +++++++++
>  .../freescale/imx8mp-var-smarc-echo-m7.dtso   | 36 ++++++++++
>  .../freescale/imx8mp-var-som-symphony-m7.dtso | 36 ++++++++++
>  5 files changed, 184 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-common-m7.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata-m7.dtso
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-smarc-echo-m7.dtso
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony-m7.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index ae28e6b02a5c..3745688a5b4a 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -723,9 +723,22 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb
>
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-ultra-mach-sbc.dtb
> +
> +imx8mp-var-dart-sonata-m7-dtbs := imx8mp-var-dart-sonata.dtb imx8mp-var-dart-sonata-m7.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-dart-sonata.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-dart-sonata-m7.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-dart-sonata-m7.dtbo
> +
> +imx8mp-var-smarc-echo-m7-dtbs := imx8mp-var-smarc-echo.dtb imx8mp-var-smarc-echo-m7.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-smarc-echo.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-smarc-echo-m7.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-smarc-echo-m7.dtbo
> +
> +imx8mp-var-som-symphony-m7-dtbs := imx8mp-var-som-symphony.dtb imx8mp-var-som-symphony-m7.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony-m7.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony-m7.dtbo
> +
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-common-m7.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-common-m7.dtsi
> new file mode 100644
> index 000000000000..9d554a175fbf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-common-m7.dtsi
> @@ -0,0 +1,68 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Common Cortex-M7 configuration for Variscite i.MX8M Plus modules
> + *
> + * Link: https://www.variscite.com/
> + *
> + * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
> + *
> + */
> +
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +
> +&{/} {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		vdev0vring0: vdev0vring0@40000000 {
> +			reg = <0 0x40000000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		vdev0vring1: vdev0vring1@40008000 {
> +			reg = <0 0x40008000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		rsc_table: rsc-table@400ff000 {
> +			reg = <0 0x400ff000 0 0x1000>;
> +			no-map;
> +		};
> +
> +		vdev0buffer: vdev0buffer@40400000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0 0x40400000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		/*
> +		 * Keep this region aligned with the Cortex-M7 DDR region in the
> +		 * boot firmware's RDC configuration.
> +		 *
> +		 * RDC DDR addresses are encoded as:
> +		 * (physical address - 0x40000000) >> 1.
> +		 */
> +		m7_reserved: m7@7b000000 {
> +			reg = <0 0x7b000000 0 0x1000000>;
> +			no-map;
> +		};

because we already use memory-region-names, node name can use common node name
memory@...

Frank

      reply	other threads:[~2026-11-20 17:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 14:32 [PATCH v1 1/1] arm64: dts: freescale: imx8mp-var: Add Cortex-M7 support Stefano Radaelli
2026-11-20 17:07 ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=awB-b1P9sX1FwNeT@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pierluigi.p@variscite.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=stefano.r@variscite.com \
    --cc=stefano.radaelli21@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox