Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Haotian Zhang" <vulab@iscas.ac.cn>
Cc: imx@lists.linux.dev, Frank.Li@kernel.org
Subject: Re: [PATCH] clocksource/drivers/timer-imx-gpt: fix resource leak on init error paths
Date: Thu, 08 Oct 2026 17:45:17 +0000	[thread overview]
Message-ID: <sashiko-outbox-164434@kernel.org> (raw)
In-Reply-To: <20261008173604.2733975-1-vulab@iscas.ac.cn>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] clocksource: Use-After-Unmap of timer base by sched_clock on init error
- [Medium] clocksource: missing irq_dispose_mapping on init error path
--

commit e37f50884f58329bb1905901be3a80315d582d01
Author: Haotian Zhang <vulab@iscas.ac.cn>

clocksource/drivers/timer-imx-gpt: fix resource leak on init error paths

mxc_timer_init_dt() maps the timer registers with of_iomap() and obtains
the ipg and per clocks with of_clk_get_by_name(), but every error path
jumps to err_kfree, which only frees the imx_timer structure.  The
ioremap'd mapping and the clock references are therefore leaked when
irq_of_parse_and_map() or _mxc_timer_init() fails.

Unmap the I/O region and release the clocks on those error paths.

> diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
> index 8335bd7f8c6ce..b8005054b30ae 100644
> --- a/drivers/clocksource/timer-imx-gpt.c
> +++ b/drivers/clocksource/timer-imx-gpt.c
> @@ -441,7 +441,7 @@ static int __init mxc_timer_init_dt(struct device_node *np,  enum imx_gpt_type t
>  	imxtm->irq = irq_of_parse_and_map(np, 0);
>  	if (imxtm->irq <= 0) {
>  		ret = -EINVAL;
> -		goto err_kfree;
> +		goto err_unmap;
>  	}
>  
>  	imxtm->clk_ipg = of_clk_get_by_name(np, "ipg");
> @@ -455,12 +455,19 @@ static int __init mxc_timer_init_dt(struct device_node *np,  enum imx_gpt_type t
>  
>  	ret = _mxc_timer_init(imxtm);
>  	if (ret)
> -		goto err_kfree;
> +		goto err_clk_put;
>  
>  	initialized = 1;
>  
>  	return 0;
>  
> +err_clk_put:
> +	if (!IS_ERR_OR_NULL(imxtm->clk_per))
> +		clk_put(imxtm->clk_per);
> +	if (!IS_ERR_OR_NULL(imxtm->clk_ipg))
> +		clk_put(imxtm->clk_ipg);

[Severity: Medium]
Does this error path in mxc_timer_init_dt() leak the IRQ mapping allocated
earlier by irq_of_parse_and_map()?

If _mxc_timer_init() fails, the code jumps here to clean up the clocks and
the ioremap, but it does not call irq_dispose_mapping(imxtm->irq) to clean
up the IRQ mapping.

> +err_unmap:
> +	iounmap(imxtm->base);

[Severity: High]
Can this unmap in mxc_timer_init_dt() cause a fatal use-after-unmap page
fault in the core kernel?

If _mxc_timer_init() fails late in its execution, it might return an error
after mxc_clocksource_init() has already run successfully. For example:

drivers/clocksource/timer-imx-gpt.c:_mxc_timer_init()
    ret = mxc_clocksource_init(imxtm);
    if (ret)
        return ret;
    return mxc_clockevent_init(imxtm);

If mxc_clockevent_init() returns an error, mxc_clocksource_init() has
already called sched_clock_register() and registered the clocksource using
imxtm->base. Since there are no APIs to unregister the sched_clock or
clocksource, they will continue to access this memory from hot paths like
timekeeping. Unmapping it here leaves those subsystems reading from freed
memory.

>  err_kfree:
>  	kfree(imxtm);
>  	return ret;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261008173604.2733975-1-vulab@iscas.ac.cn?part=1

  reply	other threads:[~2026-10-08 17:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08 17:36 [PATCH] clocksource/drivers/timer-imx-gpt: fix resource leak on init error paths Haotian Zhang
2026-10-08 17:45 ` sashiko-bot [this message]
2026-10-08 19:32   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-164434@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=vulab@iscas.ac.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox