Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: Frank.Li@oss.nxp.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, robh@kernel.org,
	conor+dt@kernel.org, Frank.Li@kernel.org
Subject: Re: [PATCH v2 03/13] ARM: dts: imx6dl-b155v2: add touchscreen size properties
Date: Mon, 19 Oct 2026 18:35:56 +0000	[thread overview]
Message-ID: <sashiko-outbox-178098@kernel.org> (raw)
In-Reply-To: <20261019-arm_dts_cleanup2-v2-3-dcdcbe6389c1@nxp.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] ARM: dts: imx6dl-b155v2: commit message contradicts 16384 touchscreen size
--

commit 9dc060e080fedd6ab87ca8276cfb3bb59a468536
Author: Frank Li <Frank.Li@nxp.com>

ARM: dts: imx6dl-b155v2: add touchscreen size properties

This commit adds touchscreen-size-x and touchscreen-size-y properties to the
touchscreen@2a node in arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts to satisfy
the eeti,exc3000 binding schema.

>     ARM: dts: imx6dl-b155v2: add touchscreen size properties
>     
>     The eeti,exc3000 schema requires touchscreen-size-x and touchscreen-size-y
>     properties. Add them for the EXC80H84 touchscreen on the B155v2 board,
>     matching the 1366x768 resolution of the AUO G156XTN01 panel.
>     
>     Fix below CHECK_DTBS warnings:
>       arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dtb: touchscreen@2a (eeti,exc80h84): 'touchscreen-size-x' is a required property
>             from schema $id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml
>     
>     Signed-off-by: Frank Li <Frank.Li@nxp.com>
> 
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
> index 7edc788bcb8f3..dd7b892cf0722 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
> @@ -25,6 +25,8 @@ touchscreen@2a {
>  		pinctrl-0 = <&pinctrl_q7_gpio0>;
>  		interrupt-parent = <&gpio5>;
>  		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +		touchscreen-size-x = <16384>;
> +		touchscreen-size-y = <16384>;
>  		touchscreen-inverted-x;
>  		touchscreen-inverted-y;
>  		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;

[Severity: Medium]
The commit message states that these properties are added "matching the
1366x768 resolution of the AUO G156XTN01 panel", but the touchscreen@2a node in
arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts sets both touchscreen-size-x and
touchscreen-size-y to 16384.

In drivers/input/touchscreen/exc3000.c, exc3000_info defines the native
coordinate range for EETI_EXC80H84 as 16K:

drivers/input/touchscreen/exc3000.c:exc3000_info[] = {
	...
	[EETI_EXC80H84] = {
		.name = "EETI EXC80H84 Touch Screen",
		.max_xy = SZ_16K - 1,
	},
	...
};

Should the commit message be updated to reflect that the properties are set to
16384 to match the EXC80H84 controller's 16K coordinate range rather than the
1366x768 panel resolution?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261019-arm_dts_cleanup2-v2-0-dcdcbe6389c1@nxp.com?part=3

  reply	other threads:[~2026-10-19 18:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19 18:26 [PATCH v2 00/13] ARM: dts: imx: cleanup some CHECK_DTBS warnings Frank.Li
2026-10-19 18:26 ` [PATCH v2 01/13] ARM: dts: imx6q-dms-ba16: remove undocumented property fsl,receive-dpll-mode Frank.Li
2026-10-19 18:26 ` [PATCH v2 02/13] ARM: dts: imx50-amazon-yoshi: remove undocument property min-frequency Frank.Li
2026-10-19 18:26 ` [PATCH v2 03/13] ARM: dts: imx6dl-b155v2: add touchscreen size properties Frank.Li
2026-10-19 18:35   ` sashiko-bot [this message]
2026-10-19 18:26 ` [PATCH v2 04/13] ARM: dts: imx6q-gw5400-a: fix SPI NOR flash vendor prefix Frank.Li
2026-10-19 18:26 ` [PATCH v2 05/13] ARM: dts: imx6dl-prtmvt: remove redundant panel compatible fallback Frank.Li
2026-10-19 18:26 ` [PATCH v2 06/13] ARM: dts: imx53-smd: change compatible string to dlg,da9053-aa Frank.Li
2026-10-19 18:26 ` [PATCH v2 07/13] ARM: dts: imx6qdl-savageboard: remove undocument avic,tm097tdh02 Frank.Li
2026-10-19 18:26 ` [PATCH v2 08/13] ARM: dts: imx6ul-tx6ul: remove front compatible string karo,imx6ul-tx6ul-sgtl5000 Frank.Li
2026-10-19 18:26 ` [PATCH v2 09/13] ARM: dts: imx6qdl-tx6-mb7: remove redundant pixelclk-active for simple panel Frank.Li
2026-10-19 18:26 ` [PATCH v2 10/13] ARM: dts: imx6q-h100: rename port to port@0 for mipi_csi Frank.Li
2026-10-19 18:26 ` [PATCH v2 11/13] ARM: dts: imx6qdl-sabrelite: fix typo vync-active Frank.Li
2026-10-19 18:26 ` [PATCH v2 12/13] ARM: dts: imx6q-novena: use interrupts replace irq-gpio Frank.Li
2026-10-19 18:26 ` [PATCH v2 13/13] ARM: dts: imx6sx-sdb-mqs: remove pinctrl-0 and pinctrl-names Frank.Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-178098@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=Frank.Li@oss.nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox