Re: Update FC22 - doesn't find root fs and doesn't boot

[Gerhard Wiesinger <lists-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>]

On 27.05.2015 14:25, Harald Hoyer wrote:
> Am 27.05.2015 um 14:13 schrieb Andrei Borzenkov:
>> On Wed, May 27, 2015 at 3:09 PM, Gerhard Wiesinger <lists-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org> wrote:
>>> On 27.05.2015 13:56, Harald Hoyer wrote:
>>>> Am 27.05.2015 um 13:28 schrieb Gerhard Wiesinger:
>>>>> Hello,
>>>>>
>>>>> After upgrading one machine it does't boot anymore. Booting the old
>>>>> kernel
>>>>> works well.
>>>>>
>>>>> It is a RAID, LUKS, LVM setup. Find relevant details below.
>>>>>
>>>>> So it looks RAID assembling doesn't work any more.
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Ciao,
>>>>> Gerhard
>>>>>
>>>>> blkid
>>>>> /dev/sda1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="5ec6792c-01"
>>>>> /dev/sdb1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="1c7cffaf-01"
>>>>> /dev/sdc1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="0079dfc3-01"
>>>>> /dev/sdd1: UUID="eb295015-e20b-e133-15db-5c9130487300"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="fadeaffe-01"
>>>>> /dev/sde1: UUID="eb295015-e20b-e133-15db-5c9130487300"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="539b5814-01"
>>>>> /dev/sdf1: UUID="eb295015-e20b-e133-15db-5c9130487300"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="badeaffe-01"
>>>>> /dev/sdh1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="15631562-01"
>>>>> /dev/sdg1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534"
>>>>> TYPE="linux_raid_member"
>>>>> PARTUUID="162f0d0b-01"
>>>>>
>>>>>
>>>>> blkid -o udev
>>>>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=5ec6792c-01
>>>>>
>>>>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=1c7cffaf-01
>>>>>
>>>>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=0079dfc3-01
>>>>>
>>>>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300
>>>>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=fadeaffe-01
>>>>>
>>>>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300
>>>>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=539b5814-01
>>>>>
>>>>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300
>>>>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=badeaffe-01
>>>>>
>>>>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534
>>>>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=15631562-01
>>>>>
>>>>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534
>>>>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534
>>>>> ID_FS_TYPE=linux_raid_member
>>>>> ID_FS_PARTUUID=162f0d0b-01
>>>>>
>>>>> [    2.479836] myhost systemd[1]: Device
>>>>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0.device appeared
>>>>> twice
>>>>> with different sysfs paths /sys
>>>>>
>>>>> /devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh
>>>>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host8/target
>>>>> 8:0:0/8:0:0:0/block/sdg
>>>>> [    2.500826] myhost systemd[1]: Device
>>>>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0\x2dpart1.device
>>>>> appeared twice with different sysfs p
>>>>> aths
>>>>>
>>>>> /sys/devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh/sdh1
>>>>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.
>>>>> 0/host8/target8:0:0/8:0:0:0/block/sdg/sdg1
>>>>> [    2.632754] myhost kernel: Switched to clocksource tsc
>>>>> [   91.162986] myhost systemd[1]: Job dev-md0.device/start timed out.
>>>>> [   91.163138] myhost systemd[1]: Timed out waiting for device
>>>>> dev-md0.device.
>>>>> [   91.163251] myhost systemd[1]: Dependency failed for Cryptography
>>>>> Setup for
>>>>> luks-md0.
>>>>> [   91.163360] myhost systemd[1]: Dependency failed for
>>>>> dev-mapper-luks\x2dmd0.device.
>>>>> [   91.163474] myhost systemd[1]: Job dev-mapper-luks\x2dmd0.device/start
>>>>> failed with result 'dependency'.
>>>>> [   91.163586] myhost systemd[1]: Dependency failed for Encrypted
>>>>> Volumes.
>>>>> [   91.163694] myhost systemd[1]: Job cryptsetup.target/start failed with
>>>>> result 'dependency'.
>>>>> [   91.163801] myhost systemd[1]: Job
>>>>> systemd-cryptsetup@luks\x2dmd0.service/start failed with result
>>>>> 'dependency'.
>>>>> [   91.163910] myhost systemd[1]: Job dev-md0.device/start failed with
>>>>> result
>>>>> 'timeout'.
>>>>> [   91.164021] myhost systemd[1]: Reached target System Initialization.
>>>>> [   91.164129] myhost systemd[1]: Starting System Initialization.
>>>>> [   91.164236] myhost systemd[1]: Reached target Basic System.
>>>>> [   91.164346] myhost systemd[1]: Starting Basic System.
>>>>> [  185.740238] myhost dracut-initqueue[340]: Warning: Could not boot.
>>>>> [  185.741266] myhost systemd[1]: Received SIGRTMIN+20 from PID 341
>>>>> (plymouthd).
>>>>> [  185.841257] myhost dracut-initqueue[340]: Warning:
>>>>> /dev/VolGroup00/root does
>>>>> not exist
>>>>> [  185.841403] myhost systemd[1]: Starting Dracut Emergency Shell...
>>>>> [  185.859366] myhost systemd[1]: Received SIGRTMIN+21 from PID 341
>>>>> (plymouthd).
>>>>>
>>>>> dracut:/# cat "/run/initramfs/rdsosreport.txt"
>>>>> + cat /lib/dracut/dracut-041-10.fc22.1
>>>>> dracut-041-10.fc22.1
>>>>> + cat /proc/cmdline
>>>>> BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro
>>>>> quiet
>>>>> console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16
>>>>> LANG=en_US.UTF-
>>>>> 8 KEYTABLE=de-latin1
>>>>
>>>> your kernel cmdline seems to be missing the raid configuration
>>>>
>>>> rd.md.uuid=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>>>> rd.md.uuid=eb295015-e20b-e133-15db-5c9130487300
>>>> rd.md.uuid=51e8e983-8786-b868-dbc3-87357e1a9534
>>>>
>>>> ... whatever is needed to boot your system.
>>>>
>>>> # dracut --print-cmdline
>>>>
>>>> should tell you what kernel cmdline parameters are needed
>>>
>>>
>>> Thank you for the fast reply.
>>>
>>> # comment: 3 separate lines!!!!! (maybe a problem)
>>> dracut --print-cmdline
>>>   rd.luks.uuid=luks-0c66fc77-a8a0-49e6-b96c-55e886a91f09
>>> rd.lvm.lv=VolGroup00/root
>>>   rd.lvm.lv=VolGroup00/swap
>>>   rd.md.uuid=51e8e983:8786b868:dbc38735:7e1a9534
>>> rd.md.uuid=56e9bde4:5cd1630d:188c22a5:4c1c8c37
>>> resume=/dev/mapper/VolGroup00-swap root=/dev/mapper/VolGroup00-root
>>> rootflags=rw,relatime,data=ordered rootfstype=ext4
>>>
>>> dracut --force 4.0.4-301.fc22.x86_64
>>>
>>> Still no correct entry in /etc/grub2.cfg
>> I would be very surprised if dracut made any changes to grub.cfg. As I
>> understand it, you either build host-specific dracut that will include
>> this emulated command line or you have to add lines manually to your
>> boot loader configuration.
>>
>>> linux16 /vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro quiet
>>> console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16
>>> LANG=en_US.UTF-8 KEYTABLE=de-latin1
>>>
>>> Looks like a bug to me.
> You have to add the options manually to the grub conf and all in the same line.
>
> dracut does not modify your grub configuration.
OK, I thought it was modifying it, at least in the past.

Added it manually and it worked well.

What's still strange:

Last lines after startup, luks-md0 has already been started as the root 
fs is there ....
Starting Cryptography Setup for luks-md0...
          Starting Authorization Manager...

Fedora release 22 (Twenty Two)
Kernel 4.0.4-301.fc22.x86_64 on an x86_64 (ttyS0)

# Rebooting, why is a passphrase necessary here?
reboot
Please enter passphrase for disk luks-md0!

Possible bug here?

Ciao,
Gerhard