From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 03/22] drm/i915: PLL defines for VLV
Date: Wed, 28 Mar 2012 13:39:23 -0700 [thread overview]
Message-ID: <1332967182-23298-4-git-send-email-jbarnes@virtuousgeek.org> (raw)
In-Reply-To: <1332967182-23298-1-git-send-email-jbarnes@virtuousgeek.org>
Add register definitions for the new VLV PLL bits.
v2: remove unused bits & regs (Ben)
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
drivers/gpu/drm/i915/intel_display.c | 10 +++++++++-
2 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7ce595f..7abdc15 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -796,7 +796,9 @@
#define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
#define DPLL_VCO_ENABLE (1 << 31)
#define DPLL_DVO_HIGH_SPEED (1 << 30)
+#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30)
#define DPLL_SYNCLOCK_ENABLE (1 << 29)
+#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29)
#define DPLL_VGA_MODE_DIS (1 << 28)
#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
#define DPLLB_MODE_LVDS (2 << 26) /* i915 */
@@ -808,6 +810,7 @@
#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
+#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
@@ -903,6 +906,7 @@
#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
#define _DPLL_B_MD 0x06020 /* 965+ only */
#define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD)
+
#define _FPA0 0x06040
#define _FPA1 0x06044
#define _FPB0 0x06048
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 07b8396..5d97630 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3487,6 +3487,11 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
return true;
}
+static int valleyview_get_display_clock_speed(struct drm_device *dev)
+{
+ return 400000; /* FIXME */
+}
+
static int i945_get_display_clock_speed(struct drm_device *dev)
{
return 400000;
@@ -8915,7 +8920,10 @@ static void intel_init_display(struct drm_device *dev)
}
/* Returns the core display clock speed */
- if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+ if (IS_VALLEYVIEW(dev))
+ dev_priv->display.get_display_clock_speed =
+ valleyview_get_display_clock_speed;
+ else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
else if (IS_I915G(dev))
--
1.7.5.4
next prev parent reply other threads:[~2012-03-28 20:39 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-28 20:39 ValleyView patches Jesse Barnes
2012-03-28 20:39 ` [PATCH 01/22] drm/i915: add ValleyView driver structs and IS_VALLEYVIEW macro Jesse Barnes
2012-03-28 20:39 ` [PATCH 02/22] drm/i915: ValleyView watermark support Jesse Barnes
2012-03-28 20:39 ` Jesse Barnes [this message]
2012-03-28 20:39 ` [PATCH 04/22] drm/i915: interrupt bit definitions for VLV Jesse Barnes
2012-03-28 21:33 ` Daniel Vetter
2012-03-28 21:39 ` Jesse Barnes
2012-03-28 21:47 ` Daniel Vetter
2012-03-28 21:50 ` Jesse Barnes
2012-03-28 20:39 ` [PATCH 05/22] drm/i915: add DPIO support Jesse Barnes
2012-03-28 20:39 ` [PATCH 06/22] drm/i915: add ValleyView clock gating init Jesse Barnes
2012-03-28 20:39 ` [PATCH 07/22] drm/i915: split PLL update code out of i9xx_crtc_mode_set Jesse Barnes
2012-03-28 20:39 ` [PATCH 08/22] drm/i915: split LVDS " Jesse Barnes
2012-03-28 20:39 ` [PATCH 09/22] drm/i915: ValleyView mode setting limits and PLL functions Jesse Barnes
2012-03-28 20:39 ` [PATCH 10/22] drm/i915: program drain latency regs on ValleyView Jesse Barnes
2012-03-28 20:39 ` [PATCH 11/22] drm/i915: Enable DP panel power sequencing for ValleyView Jesse Barnes
2012-03-28 21:59 ` Daniel Vetter
2012-03-28 23:57 ` Jesse Barnes
2012-03-28 20:39 ` [PATCH 12/22] drm/i915: Enable HDMI on ValleyView Jesse Barnes
2012-03-28 20:39 ` [PATCH 13/22] agp/intel: map more registers for use by the GTT code Jesse Barnes
2012-03-28 20:39 ` [PATCH 14/22] agp/intel: add ValleyView AGP driver Jesse Barnes
2012-03-28 20:39 ` [PATCH 15/22] agp/intel: bind " Jesse Barnes
2012-03-28 20:39 ` [PATCH 16/22] drm/i915: add ValleyView specific CRT detect function Jesse Barnes
2012-03-28 20:39 ` [PATCH 17/22] drm/i915: add ValleyView specific force wake get/put functions Jesse Barnes
2012-03-28 20:39 ` [PATCH 18/22] drm/i915: ValleyView IRQ support Jesse Barnes
2012-03-30 16:46 ` Daniel Vetter
2012-03-30 16:52 ` Daniel Vetter
2012-03-28 20:39 ` [PATCH 19/22] drm/i915: check for disabled interrupts on ValleyView Jesse Barnes
2012-03-28 20:39 ` [PATCH 20/22] drm/i915: add HDMI and DP port enumeration " Jesse Barnes
2012-03-28 20:39 ` [PATCH 21/22] drm/i915: disable turbo on ValleyView for now Jesse Barnes
2012-03-28 22:02 ` Daniel Vetter
2012-03-28 23:57 ` Jesse Barnes
2012-03-28 20:39 ` [PATCH 22/22] drm/i915: bind driver to ValleyView chipsets Jesse Barnes
2012-03-29 9:06 ` ValleyView patches Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332967182-23298-4-git-send-email-jbarnes@virtuousgeek.org \
--to=jbarnes@virtuousgeek.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).