intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 2/7] drm/i915: use FPGA_DBG for the "unclaimed register" checks
Date: Fri, 25 Jan 2013 18:57:37 -0200	[thread overview]
Message-ID: <1359147462-3902-3-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1359147462-3902-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

We plan to treat GEN7_ERR_INT as an interrupt, so use this register
for the checks inside I915_WRITE. This way we can have the best of
both worlds: the error message with a register address and the
interrupt.

V2: Split in 2 patches: one for the macro, one for changing the
register, as requested by Ben.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c |    8 ++++----
 drivers/gpu/drm/i915/i915_reg.h |    3 +++
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ae0a55a..f47de4d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1226,16 +1226,16 @@ ilk_dummy_write(struct drm_i915_private *dev_priv)
 
 #define UNCLAIMED_REG_CLEAR(dev_priv, reg) \
 	if (IS_HASWELL(dev_priv->dev) && \
-	    (I915_READ_NOTRACE(GEN7_ERR_INT) & ERR_INT_MMIO_UNCLAIMED)) { \
+	    (I915_READ_NOTRACE(FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) { \
 		DRM_ERROR("Unknown unclaimed register before writing to %x\n", reg); \
-		I915_WRITE_NOTRACE(GEN7_ERR_INT, ERR_INT_MMIO_UNCLAIMED); \
+		I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM); \
 	}
 
 #define UNCLAIMED_REG_CHECK(dev_priv, reg) \
 	if (IS_HASWELL(dev_priv->dev) && \
-	    (I915_READ_NOTRACE(GEN7_ERR_INT) & ERR_INT_MMIO_UNCLAIMED)) { \
+	    (I915_READ_NOTRACE(FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) { \
 		DRM_ERROR("Unclaimed write to %x\n", reg); \
-		writel(ERR_INT_MMIO_UNCLAIMED, dev_priv->regs + GEN7_ERR_INT);	\
+		I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM); \
 	}
 
 #define __i915_read(x, y) \
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 15c15a5..ee30fb9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -515,6 +515,9 @@
 #define GEN7_ERR_INT	0x44040
 #define   ERR_INT_MMIO_UNCLAIMED (1<<13)
 
+#define FPGA_DBG		0x42300
+#define FPGA_DBG_RM_NOCLAIM	(1<<31)
+
 /* GM45+ chicken bits -- debug workaround bits that may be required
  * for various sorts of correct behavior.  The top 16 bits of each are
  * the enables for writing to the corresponding low bit.
-- 
1.7.10.4

  parent reply	other threads:[~2013-01-25 20:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-25 20:57 [PATCH 0/7] Unclaimed register reporting V2 Paulo Zanoni
2013-01-25 20:57 ` [PATCH 1/7] drm/i915: create macros for the "unclaimed register" checks Paulo Zanoni
2013-01-26  1:02   ` Ben Widawsky
2013-01-28 20:17     ` Ben Widawsky
2013-01-25 20:57 ` Paulo Zanoni [this message]
2013-01-26  1:03   ` [PATCH 2/7] drm/i915: use FPGA_DBG " Ben Widawsky
2013-01-25 20:57 ` [PATCH 3/7] drm/i915: clear the FPGA_DBG_RM_NOCLAIM bit at driver init Paulo Zanoni
2013-01-26  1:05   ` Ben Widawsky
2013-01-29 19:02   ` [PATCH 3/3] " Paulo Zanoni
2013-01-25 20:57 ` [PATCH 4/7] drm/i915: check for unclaimed registers on I915_READ too Paulo Zanoni
2013-01-25 20:57 ` [PATCH 5/7] drm/i915: WARN on unclaimed registers Paulo Zanoni
2013-01-26  1:11   ` Ben Widawsky
2013-01-25 20:57 ` [PATCH 6/7] drm/i915: only check for unclaimed registers if drm_debug Paulo Zanoni
2013-01-25 20:57 ` [PATCH 7/7] drm/i915: print Gen 7 error interrupts Paulo Zanoni
2013-01-26  1:24   ` Ben Widawsky
2013-02-08 18:22     ` Paulo Zanoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359147462-3902-3-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).