[PATCH 20/22] drm/i915: add Punit read/write routines for VLV

[Jesse Barnes <jbarnes@virtuousgeek.org>]

Slightly different than other platforms.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_drv.h |    2 ++
 drivers/gpu/drm/i915/i915_reg.h |   22 ++++++++++++
 drivers/gpu/drm/i915/intel_pm.c |   74 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 98 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 34f01a9..60eee7d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1749,6 +1749,8 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
 
 int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val);
 int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val);
+int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val);
+int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val);
 
 #define __i915_read(x, y) \
 	u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg, bool trace);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7e13f34..7325b7a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4335,6 +4335,28 @@
 #define GEN6_PCODE_DATA				0x138128
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 
+#define VLV_IOSF_DOORBELL_REQ			0x182100
+#define   IOSF_DEVFN_SHIFT			24
+#define   IOSF_OPCODE_SHIFT			16
+#define   IOSF_PORT_SHIFT			8
+#define   IOSF_BYTE_ENABLES_SHIFT		4
+#define   IOSF_BAR_SHIFT			1
+#define   IOSF_SB_BUSY				(1<<0)
+#define   IOSF_PORT_PUNIT			0x4
+#define VLV_IOSF_DATA				0x182104
+#define VLV_IOSF_ADDR				0x182108
+
+#define PUNIT_REG_GPU_LFM			0xd3
+#define PUNIT_REG_GPU_FREQ_REQ			0xd4
+#define PUNIT_REG_GPU_FREQ_STS			0xd8
+#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ		0xdc
+
+#define PUNIT_OPCODE_REG_READ			6
+#define PUNIT_OPCODE_REG_WRITE			7
+
+#define PUNIT_FUSE_BUS2				0xf6 /* bits 47:40 */
+#define PUNIT_FUSE_BUS1				0xf5 /* bits 55:48 */
+
 #define GEN6_GT_CORE_STATUS		0x138060
 #define   GEN6_CORE_CPD_STATE_MASK	(7<<4)
 #define   GEN6_RCn_MASK			7
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 7d812ba..bb97309 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4356,3 +4356,77 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
 
 	return 0;
 }
+
+int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
+{
+	u32 cmd, devfn, opcode, port, be, bar;
+
+	bar = 0;
+	be = 0xf;
+	port = IOSF_PORT_PUNIT;
+	opcode = PUNIT_OPCODE_REG_READ;
+	devfn = 16;
+
+	cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
+		(port << IOSF_PORT_SHIFT) | (be | IOSF_BYTE_ENABLES_SHIFT) |
+		(bar << IOSF_BAR_SHIFT);
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
+		DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed\n");
+		return -EAGAIN;
+	}
+
+	I915_WRITE(VLV_IOSF_ADDR, addr);
+	I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
+
+	if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
+		     500)) {
+		DRM_ERROR("timeout waiting for pcode read (%d) to finish\n",
+			  addr);
+		return -ETIMEDOUT;
+	}
+
+	*val = I915_READ(VLV_IOSF_DATA);
+	I915_WRITE(VLV_IOSF_DATA, 0);
+
+	return 0;
+}
+
+int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
+{
+	u32 cmd, devfn, opcode, port, be, bar;
+
+	bar = 0;
+	be = 0xf;
+	port = IOSF_PORT_PUNIT;
+	opcode = PUNIT_OPCODE_REG_WRITE;
+	devfn = 16;
+
+	cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
+		(port << IOSF_PORT_SHIFT) | (be | IOSF_BYTE_ENABLES_SHIFT) |
+		(bar << IOSF_BAR_SHIFT);
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
+		DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed\n");
+		return -EAGAIN;
+	}
+
+	I915_WRITE(VLV_IOSF_ADDR, addr);
+	I915_WRITE(VLV_IOSF_DATA, val);
+	I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
+
+	if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
+		     500)) {
+		DRM_ERROR("timeout waiting for pcode write (%d) to finish\n",
+			  addr);
+		return -ETIMEDOUT;
+	}
+
+	I915_WRITE(VLV_IOSF_DATA, 0);
+
+	return 0;
+}
-- 
1.7.9.5