VT switchless resume v2

VT switchless resume v2

[Jesse Barnes]

Fixed up the sprite bits to actually work, I had the tracking of the
state in the wrong place, which meant we'd use pre-modified bits on
resume, leading to breakage.  The other patches are the same.

Thanks,
Jesse

[PATCH 1/6] drm/i915: don't restore LVDS enable state blindly

[Jesse Barnes]

We still rely on a few LVDS bits, but restoring the enable bit can cause
trouble at this point, so don't.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_suspend.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 2135f21..a81abed 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -268,9 +268,9 @@ static void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
 
 	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(PCH_LVDS, dev_priv->regfile.saveLVDS);
+		I915_WRITE(PCH_LVDS, dev_priv->regfile.saveLVDS & 0x7fffffff);
 	} else if (IS_MOBILE(dev) && !IS_I830(dev))
-		I915_WRITE(LVDS, dev_priv->regfile.saveLVDS);
+		I915_WRITE(LVDS, dev_priv->regfile.saveLVDS & 0x7fffffff);
 
 	if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev))
 		I915_WRITE(PFIT_CONTROL, dev_priv->regfile.savePFIT_CONTROL);
-- 
1.7.9.5

[PATCH 2/6] drm/i915: add sprite restore function v2

[Jesse Barnes]

To be used to restore sprite state on resume.

v2: move sprite tracking bits up so we don't track modified sprite state

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_drv.h    |    5 +++++
 drivers/gpu/drm/i915/intel_sprite.c |   23 +++++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 005a91f..1b548e0 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -247,6 +247,10 @@ struct intel_plane {
 	bool can_scale;
 	int max_downscale;
 	u32 lut_r[1024], lut_g[1024], lut_b[1024];
+	int crtc_x, crtc_y;
+	unsigned int crtc_w, crtc_h;
+	uint32_t x, y;
+	uint32_t src_w, src_h;
 	void (*update_plane)(struct drm_plane *plane,
 			     struct drm_framebuffer *fb,
 			     struct drm_i915_gem_object *obj,
@@ -532,6 +536,7 @@ extern bool intel_encoder_check_is_cloned(struct intel_encoder *encoder);
 extern void intel_connector_dpms(struct drm_connector *, int mode);
 extern bool intel_connector_get_hw_state(struct intel_connector *connector);
 extern void intel_modeset_check_state(struct drm_device *dev);
+extern void intel_plane_restore(struct drm_plane *plane);
 
 
 static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 03cfd62..ca171af 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -438,6 +438,15 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 
 	old_obj = intel_plane->obj;
 
+	intel_plane->crtc_x = crtc_x;
+	intel_plane->crtc_y = crtc_y;
+	intel_plane->crtc_w = crtc_w;
+	intel_plane->crtc_h = crtc_h;
+	intel_plane->x = x;
+	intel_plane->y = y;
+	intel_plane->src_w = src_w;
+	intel_plane->src_h = src_h;
+
 	src_w = src_w >> 16;
 	src_h = src_h >> 16;
 
@@ -644,6 +653,20 @@ out_unlock:
 	return ret;
 }
 
+void intel_plane_restore(struct drm_plane *plane)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+
+	if (!plane->crtc || !plane->fb)
+		return;
+
+	intel_update_plane(plane, plane->crtc, plane->fb,
+			   intel_plane->crtc_x, intel_plane->crtc_y,
+			   intel_plane->crtc_w, intel_plane->crtc_h,
+			   intel_plane->x, intel_plane->y,
+			   intel_plane->src_w, intel_plane->src_h);
+}
+
 static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
-- 
1.7.9.5

[PATCH 3/6] drm/i915: restore cursor and sprite state when forcing a config restore

[Jesse Barnes]

Needed for VT switchless resume.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e6dadf..2bf076e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8985,6 +8985,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum pipe pipe;
 	u32 tmp;
+	struct drm_plane *plane;
 	struct intel_crtc *crtc;
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
@@ -9081,8 +9082,20 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 
 	if (force_restore) {
 		for_each_pipe(pipe) {
-			intel_crtc_restore_mode(dev_priv->pipe_to_crtc_mapping[pipe]);
+			struct drm_crtc *crtc =
+				dev_priv->pipe_to_crtc_mapping[pipe];
+			struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+			intel_crtc_restore_mode(crtc);
+			if (intel_crtc->cursor_visible) {
+				/* Force update for previously enabled cursor */
+				intel_crtc->cursor_visible = false;
+				intel_crtc_update_cursor(&intel_crtc->base,
+							 true);
+			}
 		}
+		list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+			intel_plane_restore(plane);
 
 		i915_redisable_vga(dev);
 	} else {
-- 
1.7.9.5

[PATCH 4/6] drm/i915: enable VT switchless resume

[Jesse Barnes]

With the other bits in place, we can do this safely.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_drv.c |    9 ++++++---
 drivers/gpu/drm/i915/intel_fb.c |    3 +++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index c5b8c81..12a14e1 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -492,8 +492,6 @@ static int i915_drm_freeze(struct drm_device *dev)
 
 		cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
 
-		intel_modeset_disable(dev);
-
 		drm_irq_uninstall(dev);
 	}
 
@@ -569,9 +567,14 @@ static int __i915_drm_thaw(struct drm_device *dev)
 		mutex_unlock(&dev->struct_mutex);
 
 		intel_modeset_init_hw(dev);
-		intel_modeset_setup_hw_state(dev, false);
+
 		drm_irq_install(dev);
 		intel_hpd_init(dev);
+
+		/* Resume the modeset for every activated CRTC */
+		drm_modeset_lock_all(dev);
+		intel_modeset_setup_hw_state(dev, true);
+		drm_modeset_unlock_all(dev);
 	}
 
 	intel_opregion_init(dev);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 1c510da..987bc33 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -149,6 +149,9 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 	}
 	info->screen_size = size;
 
+	/* This driver doesn't need a VT switch to restore the mode on resume */
+	info->skip_vt_switch = true;
+
 //	memset(info->screen_base, 0, size);
 
 	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
-- 
1.7.9.5

[PATCH 5/6] drm/i915: emit a hotplug event on resume

[Jesse Barnes]

This will poke userspace into probing for configuration changes that may
have occurred across suspend/resume.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_drv.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 12a14e1..5e4f76b 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -548,6 +548,24 @@ void intel_console_resume(struct work_struct *work)
 	console_unlock();
 }
 
+static void intel_resume_hotplug(struct drm_device *dev)
+{
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	mutex_lock(&mode_config->mutex);
+	DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+		if (encoder->hot_plug)
+			encoder->hot_plug(encoder);
+
+	mutex_unlock(&mode_config->mutex);
+
+	/* Just fire off a uevent and let userspace tell us what to do */
+	drm_helper_hpd_irq_event(dev);
+}
+
 static int __i915_drm_thaw(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -575,6 +593,8 @@ static int __i915_drm_thaw(struct drm_device *dev)
 		drm_modeset_lock_all(dev);
 		intel_modeset_setup_hw_state(dev, true);
 		drm_modeset_unlock_all(dev);
+
+		intel_resume_hotplug(dev);
 	}
 
 	intel_opregion_init(dev);
-- 
1.7.9.5

[PATCH 6/6] drm/i915: remove disabled memset of framebuffer from intel_fb

[Jesse Barnes]

Commented out and unneeded.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_fb.c |    2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 987bc33..f4e0b88 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -152,8 +152,6 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 	/* This driver doesn't need a VT switch to restore the mode on resume */
 	info->skip_vt_switch = true;
 
-//	memset(info->screen_base, 0, size);
-
 	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
 	drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
 
-- 
1.7.9.5