From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/6] drm/i915: add sprite restore function v2
Date: Fri, 15 Feb 2013 13:23:10 -0800 [thread overview]
Message-ID: <1360963394-8663-3-git-send-email-jbarnes@virtuousgeek.org> (raw)
In-Reply-To: <1360963394-8663-1-git-send-email-jbarnes@virtuousgeek.org>
To be used to restore sprite state on resume.
v2: move sprite tracking bits up so we don't track modified sprite state
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_drv.h | 5 +++++
drivers/gpu/drm/i915/intel_sprite.c | 23 +++++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 005a91f..1b548e0 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -247,6 +247,10 @@ struct intel_plane {
bool can_scale;
int max_downscale;
u32 lut_r[1024], lut_g[1024], lut_b[1024];
+ int crtc_x, crtc_y;
+ unsigned int crtc_w, crtc_h;
+ uint32_t x, y;
+ uint32_t src_w, src_h;
void (*update_plane)(struct drm_plane *plane,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
@@ -532,6 +536,7 @@ extern bool intel_encoder_check_is_cloned(struct intel_encoder *encoder);
extern void intel_connector_dpms(struct drm_connector *, int mode);
extern bool intel_connector_get_hw_state(struct intel_connector *connector);
extern void intel_modeset_check_state(struct drm_device *dev);
+extern void intel_plane_restore(struct drm_plane *plane);
static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 03cfd62..ca171af 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -438,6 +438,15 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
old_obj = intel_plane->obj;
+ intel_plane->crtc_x = crtc_x;
+ intel_plane->crtc_y = crtc_y;
+ intel_plane->crtc_w = crtc_w;
+ intel_plane->crtc_h = crtc_h;
+ intel_plane->x = x;
+ intel_plane->y = y;
+ intel_plane->src_w = src_w;
+ intel_plane->src_h = src_h;
+
src_w = src_w >> 16;
src_h = src_h >> 16;
@@ -644,6 +653,20 @@ out_unlock:
return ret;
}
+void intel_plane_restore(struct drm_plane *plane)
+{
+ struct intel_plane *intel_plane = to_intel_plane(plane);
+
+ if (!plane->crtc || !plane->fb)
+ return;
+
+ intel_update_plane(plane, plane->crtc, plane->fb,
+ intel_plane->crtc_x, intel_plane->crtc_y,
+ intel_plane->crtc_w, intel_plane->crtc_h,
+ intel_plane->x, intel_plane->y,
+ intel_plane->src_w, intel_plane->src_h);
+}
+
static const struct drm_plane_funcs intel_plane_funcs = {
.update_plane = intel_update_plane,
.disable_plane = intel_disable_plane,
--
1.7.9.5
next prev parent reply other threads:[~2013-02-15 21:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-15 21:23 VT switchless v3 Jesse Barnes
2013-02-15 21:23 ` [PATCH 1/6] drm/i915: don't restore LVDS enable state blindly v2 Jesse Barnes
2013-02-15 21:23 ` Jesse Barnes [this message]
2013-02-18 17:19 ` [PATCH 2/6] drm/i915: add sprite restore function v2 Ville Syrjälä
2013-02-19 18:16 ` Jesse Barnes
2013-02-15 21:23 ` [PATCH 3/6] drm/i915: restore cursor and sprite state when forcing a config restore Jesse Barnes
2013-02-15 21:23 ` [PATCH 4/6] drm/i915: enable VT switchless resume v2 Jesse Barnes
2013-02-15 21:23 ` [PATCH 5/6] drm/i915: emit a hotplug event on resume Jesse Barnes
2013-02-15 21:23 ` [PATCH 6/6] drm/i915: remove disabled memset of framebuffer from intel_fb Jesse Barnes
2013-02-18 15:03 ` VT switchless v3 Daniel Vetter
2013-02-19 0:58 ` Kristian Høgsberg
2013-02-19 18:15 ` Jesse Barnes
2013-02-19 18:13 ` Jesse Barnes
-- strict thread matches above, loose matches on Subject: below --
2013-02-15 21:07 VT switchless resume v2 Jesse Barnes
2013-02-15 21:07 ` [PATCH 2/6] drm/i915: add sprite restore function v2 Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360963394-8663-3-git-send-email-jbarnes@virtuousgeek.org \
--to=jbarnes@virtuousgeek.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).