From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 2/8] drm/i915: use FPGA_DBG for the "unclaimed register" checks
Date: Mon, 18 Feb 2013 19:00:21 -0300 [thread overview]
Message-ID: <1361224828-3730-3-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1361224828-3730-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
We plan to treat GEN7_ERR_INT as an interrupt, so use this register
for the checks inside I915_WRITE. This way we can have the best of
both worlds: the error message with a register address and the
V2: Split in 2 patches: one for the macro, one for changing the
register, as requested by Ben.
V3: Rebase.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 8 ++++----
drivers/gpu/drm/i915/i915_reg.h | 3 +++
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index b820c26..b916d23 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1135,10 +1135,10 @@ static void
hsw_unclaimed_reg_clear(struct drm_i915_private *dev_priv, u32 reg)
{
if (IS_HASWELL(dev_priv->dev) &&
- (I915_READ_NOTRACE(GEN7_ERR_INT) & ERR_INT_MMIO_UNCLAIMED)) {
+ (I915_READ_NOTRACE(FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) {
DRM_ERROR("Unknown unclaimed register before writing to %x\n",
reg);
- I915_WRITE_NOTRACE(GEN7_ERR_INT, ERR_INT_MMIO_UNCLAIMED);
+ I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
}
}
@@ -1146,9 +1146,9 @@ static void
hsw_unclaimed_reg_check(struct drm_i915_private *dev_priv, u32 reg)
{
if (IS_HASWELL(dev_priv->dev) &&
- (I915_READ_NOTRACE(GEN7_ERR_INT) & ERR_INT_MMIO_UNCLAIMED)) {
+ (I915_READ_NOTRACE(FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) {
DRM_ERROR("Unclaimed write to %x\n", reg);
- writel(ERR_INT_MMIO_UNCLAIMED, dev_priv->regs + GEN7_ERR_INT);
+ I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
}
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 527b664..9e5844b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -522,6 +522,9 @@
#define GEN7_ERR_INT 0x44040
#define ERR_INT_MMIO_UNCLAIMED (1<<13)
+#define FPGA_DBG 0x42300
+#define FPGA_DBG_RM_NOCLAIM (1<<31)
+
#define DERRMR 0x44050
/* GM45+ chicken bits -- debug workaround bits that may be required
--
1.7.10.4
next prev parent reply other threads:[~2013-02-18 22:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-18 22:00 [PATCH 0/8] Small refactorings v2 Paulo Zanoni
2013-02-18 22:00 ` [PATCH 1/8] drm/i915: create functions for the "unclaimed register" checks Paulo Zanoni
2013-02-18 22:00 ` Paulo Zanoni [this message]
2013-02-18 22:00 ` [PATCH 3/8] drm/i915: clear the FPGA_DBG_RM_NOCLAIM bit at driver init Paulo Zanoni
2013-02-19 9:32 ` Chris Wilson
2013-02-19 19:13 ` [PATCH 3/7] " Paulo Zanoni
2013-02-19 19:45 ` Daniel Vetter
2013-02-18 22:00 ` [PATCH 4/8] drm/i915: use HAS_DDI on intel_hdmi.c and intel_display.c Paulo Zanoni
2013-02-18 22:00 ` [PATCH 5/8] drm/i915: wait_event_timeout's timeout is in jiffies Paulo Zanoni
2013-03-03 17:36 ` Daniel Vetter
2013-02-18 22:00 ` [PATCH 6/8] drm/i915: add aux_ch_ctl_reg to struct intel_dp Paulo Zanoni
2013-02-18 22:00 ` [PATCH 7/8] drm/i915: rename sdvox_reg to hdmi_reg on HDMI context Paulo Zanoni
2013-02-19 11:47 ` Daniel Vetter
2013-02-18 22:00 ` [PATCH 8/8] drm/i915: clarify confusion between SDVO and HDMI registers Paulo Zanoni
2013-02-19 12:06 ` Daniel Vetter
2013-02-19 19:19 ` Paulo Zanoni
2013-03-04 22:28 ` Daniel Vetter
2013-02-19 19:21 ` [PATCH 9/8] drm/i915: unify the definitions of the HDMI/SDVO register Paulo Zanoni
2013-02-19 19:21 ` [PATCH 10/8] drm/i915: remove duplicated SDVO/HDMI bit definitions Paulo Zanoni
2013-02-19 19:21 ` [PATCH 11/8] drm/i915: rename some HDMI " Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361224828-3730-3-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).