From: Rodrigo Vivi <rodrigo.vivi@gmail.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 04/13] drm/i915: split aux_clock_divider logic in a separated function for reuse.
Date: Wed, 12 Jun 2013 17:55:45 -0300 [thread overview]
Message-ID: <1371070554-1947-4-git-send-email-rodrigo.vivi@gmail.com> (raw)
In-Reply-To: <1371070554-1947-1-git-send-email-rodrigo.vivi@gmail.com>
Prep patch for reuse aux_clock_divider with EDP_PSR_AUX_CTL setup.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
---
drivers/gpu/drm/i915/intel_dp.c | 58 +++++++++++++++++++++++------------------
1 file changed, 33 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5332186..02b2865 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -271,29 +271,12 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
return status;
}
-static int
-intel_dp_aux_ch(struct intel_dp *intel_dp,
- uint8_t *send, int send_bytes,
- uint8_t *recv, int recv_size)
+static uint32_t get_aux_clock_divider(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
- uint32_t ch_data = ch_ctl + 4;
- int i, ret, recv_bytes;
- uint32_t status;
- uint32_t aux_clock_divider;
- int try, precharge;
- bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
- /* dp aux is extremely sensitive to irq latency, hence request the
- * lowest possible wakeup latency and so prevent the cpu from going into
- * deep sleep states.
- */
- pm_qos_update_request(&dev_priv->pm_qos, 0);
-
- intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
* and would like to run at 2MHz. So, take the
* hrawclk value and divide by 2 and use that
@@ -302,23 +285,48 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
* clock divider.
*/
if (IS_VALLEYVIEW(dev)) {
- aux_clock_divider = 100;
+ return 100;
} else if (intel_dig_port->port == PORT_A) {
if (HAS_DDI(dev))
- aux_clock_divider = DIV_ROUND_CLOSEST(
+ return DIV_ROUND_CLOSEST(
intel_ddi_get_cdclk_freq(dev_priv), 2000);
else if (IS_GEN6(dev) || IS_GEN7(dev))
- aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
+ return 200; /* SNB & IVB eDP input clock at 400Mhz */
else
- aux_clock_divider = 225; /* eDP input clock at 450Mhz */
+ return 225; /* eDP input clock at 450Mhz */
} else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
/* Workaround for non-ULT HSW */
- aux_clock_divider = 74;
+ return 74;
} else if (HAS_PCH_SPLIT(dev)) {
- aux_clock_divider = DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
+ return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
} else {
- aux_clock_divider = intel_hrawclk(dev) / 2;
+ return intel_hrawclk(dev) / 2;
}
+}
+
+static int
+intel_dp_aux_ch(struct intel_dp *intel_dp,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_size)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
+ uint32_t ch_data = ch_ctl + 4;
+ int i, ret, recv_bytes;
+ uint32_t status;
+ uint32_t aux_clock_divider = get_aux_clock_divider(intel_dp);
+ int try, precharge;
+ bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
+
+ /* dp aux is extremely sensitive to irq latency, hence request the
+ * lowest possible wakeup latency and so prevent the cpu from going into
+ * deep sleep states.
+ */
+ pm_qos_update_request(&dev_priv->pm_qos, 0);
+
+ intel_dp_check_edp(intel_dp);
if (IS_GEN6(dev))
precharge = 3;
--
1.7.11.7
next prev parent reply other threads:[~2013-06-12 20:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-12 20:55 [PATCH 01/13] drm: Added SDP and VSC structures for handling PSR for eDP Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 02/13] drm/i915: Read the EDP DPCD and PSR Capability Rodrigo Vivi
2013-06-14 16:42 ` Paulo Zanoni
2013-06-25 1:58 ` [PATCH] " Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 03/13] drm/i915: VBT Parsing for the PSR Feature Block for HSW Rodrigo Vivi
2013-06-13 13:41 ` Chris Wilson
2013-06-14 17:02 ` Paulo Zanoni
2013-06-12 20:55 ` Rodrigo Vivi [this message]
2013-06-14 17:18 ` [PATCH 04/13] drm/i915: split aux_clock_divider logic in a separated function for reuse Paulo Zanoni
2013-06-12 20:55 ` [PATCH 05/13] drm/i915: Enable/Disable PSR Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 06/13] drm/i915: Added debugfs support for PSR Status Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 07/13] drm/i915: Match all PSR mode entry conditions before enabling it Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 08/13] drm/i915: Hook PSR functionality Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 09/13] drm/i915: add update function to disable/enable-back PSR Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 10/13] drm/intel: add enable_psr module option Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 11/13] drm/i915: PSR: Make a clear separation between Sink (Panel) and Source (HW) enabling Rodrigo Vivi
2013-06-13 13:01 ` Daniel Vetter
2013-06-12 20:55 ` [PATCH 12/13] drm/i915: Adding global I915_PARAM for PSR ACTIVE Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 13/13] drm/i915: force psr exit when busy Rodrigo Vivi
2013-06-14 16:21 ` [PATCH 01/13] drm: Added SDP and VSC structures for handling PSR for eDP Paulo Zanoni
2013-06-25 1:56 ` [PATCH] " Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371070554-1947-4-git-send-email-rodrigo.vivi@gmail.com \
--to=rodrigo.vivi@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).