intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Rodrigo Vivi <rodrigo.vivi@gmail.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 07/13] drm/i915: Match all PSR mode entry conditions before enabling it.
Date: Wed, 12 Jun 2013 17:55:48 -0300	[thread overview]
Message-ID: <1371070554-1947-7-git-send-email-rodrigo.vivi@gmail.com> (raw)
In-Reply-To: <1371070554-1947-1-git-send-email-rodrigo.vivi@gmail.com>

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 39 ++++++++++++++++++---
 drivers/gpu/drm/i915/i915_drv.h     | 12 +++++++
 drivers/gpu/drm/i915/intel_dp.c     | 68 ++++++++++++++++++++++++++++++++++++-
 3 files changed, 114 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 19192af..f4e9147 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1880,11 +1880,42 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 	struct drm_info_node *node = m->private;
 	struct drm_device *dev = node->minor->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 psrctl, psrstat, psrperf;
+	u32 psrstat, psrperf;
 
-	psrctl = I915_READ(EDP_PSR_CTL);
-	seq_printf(m, "PSR Enabled: %s\n",
-		   yesno(psrctl & EDP_PSR_ENABLE));
+	if (I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE) {
+		seq_printf(m, "PSR enabled\n");
+	} else {
+		seq_printf(m, "PSR disabled: ");
+		switch (dev_priv->no_psr_reason) {
+		case PSR_NO_SOURCE:
+			seq_printf(m, "not supported on this platform");
+			break;
+		case PSR_NO_SINK:
+			seq_printf(m, "not supported by panel");
+			break;
+		case PSR_CRTC_NOT_ACTIVE:
+			seq_printf(m, "crtc not active");
+			break;
+		case PSR_PWR_WELL_ENABLED:
+			seq_printf(m, "power well enabled");
+			break;
+		case PSR_NOT_TILED:
+			seq_printf(m, "not tiled");
+			break;
+		case PSR_SPRITE_ENABLED:
+			seq_printf(m, "sprite enabled");
+			break;
+		case PSR_INTERLACED_ENABLED:
+			seq_printf(m, "interlaced enabled");
+			break;
+		case PSR_HSW_NOT_DDIA:
+			seq_printf(m, "HSW ties PSR to DDI A (eDP)");
+			break;
+		default:
+			seq_printf(m, "unknown reason");
+		}
+		seq_printf(m, "\n");
+	}
 
 	psrstat = I915_READ(EDP_PSR_STATUS_CTL);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index dd459a5..cbe842b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -509,6 +509,17 @@ enum no_fbc_reason {
 	FBC_MODULE_PARAM,
 };
 
+enum no_psr_reason {
+	PSR_NO_SOURCE, /* Not supported on platform */
+	PSR_NO_SINK, /* Not supported by panel */
+	PSR_CRTC_NOT_ACTIVE,
+	PSR_PWR_WELL_ENABLED,
+	PSR_NOT_TILED,
+	PSR_SPRITE_ENABLED,
+	PSR_INTERLACED_ENABLED,
+	PSR_HSW_NOT_DDIA,
+};
+
 enum intel_pch {
 	PCH_NONE = 0,	/* No PCH present */
 	PCH_IBX,	/* Ibexpeak PCH */
@@ -1119,6 +1130,7 @@ typedef struct drm_i915_private {
 	struct i915_power_well power_well;
 
 	enum no_fbc_reason no_fbc_reason;
+	enum no_psr_reason no_psr_reason;
 
 	struct drm_mm_node *compressed_fb;
 	struct drm_mm_node *compressed_llb;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e9c18bd..c105236 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1455,6 +1455,71 @@ void intel_edp_psr_write_vsc(struct intel_dp* intel_dp,
 	POSTING_READ(ctl_reg);
 }
 
+static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp_to_dev(intel_dp);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	struct drm_crtc *crtc = dig_port->base.base.crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj;
+	struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
+
+	if (!IS_HASWELL(dev)) {
+		DRM_DEBUG_KMS("PSR not supported on this platform\n");
+		dev_priv->no_psr_reason = PSR_NO_SOURCE;
+		return false;
+	}
+
+	if ((intel_encoder->type != INTEL_OUTPUT_EDP) ||
+	    (enc_to_dig_port(&intel_encoder->base)->port != PORT_A)) {
+		DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
+		dev_priv->no_psr_reason = PSR_HSW_NOT_DDIA;
+		return false;
+	}
+
+	if (!is_edp_psr(intel_dp)) {
+		DRM_DEBUG_KMS("PSR not supported by this panel\n");
+		dev_priv->no_psr_reason = PSR_NO_SINK;
+		return false;
+	}
+
+	if (!intel_crtc->active || !crtc->fb || !crtc->mode.clock) {
+		DRM_DEBUG_KMS("crtc not active for PSR\n");
+		dev_priv->no_psr_reason = PSR_CRTC_NOT_ACTIVE;
+		return false;
+	}
+
+	if ((I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_ENABLE) |
+	    (I915_READ(HSW_PWR_WELL_KVMR) & HSW_PWR_WELL_ENABLE)) {
+		DRM_DEBUG_KMS("PSR condition failed: Power Well is Enabled\n");
+		dev_priv->no_psr_reason = PSR_PWR_WELL_ENABLED;
+		return false;
+	}
+
+	if (obj->tiling_mode != I915_TILING_X ||
+	    obj->fence_reg == I915_FENCE_REG_NONE) {
+		DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n");
+		dev_priv->no_psr_reason = PSR_NOT_TILED;
+		return false;
+	}
+
+	if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) {
+		DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n");
+		dev_priv->no_psr_reason = PSR_SPRITE_ENABLED;
+		return false;
+	}
+
+	if ((I915_READ(PIPECONF(intel_crtc->config.cpu_transcoder)) &
+	     PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) {
+		DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
+		dev_priv->no_psr_reason = PSR_INTERLACED_ENABLED;
+		return false;
+	}
+
+	return true;
+}
+
 void intel_edp_psr_enable(struct intel_dp* intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
@@ -1464,7 +1529,8 @@ void intel_edp_psr_enable(struct intel_dp* intel_dp)
 	int precharge = 0x3;
 	int msg_size = 5;       /* Header(4) + Message(1) */
 
-	if (!is_edp_psr(intel_dp) || intel_edp_is_psr_enabled(dev))
+	if (!intel_edp_psr_match_conditions(intel_dp) ||
+	    intel_edp_is_psr_enabled(dev))
 		return;
 
 	/* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
-- 
1.7.11.7

  parent reply	other threads:[~2013-06-12 20:56 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-12 20:55 [PATCH 01/13] drm: Added SDP and VSC structures for handling PSR for eDP Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 02/13] drm/i915: Read the EDP DPCD and PSR Capability Rodrigo Vivi
2013-06-14 16:42   ` Paulo Zanoni
2013-06-25  1:58     ` [PATCH] " Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 03/13] drm/i915: VBT Parsing for the PSR Feature Block for HSW Rodrigo Vivi
2013-06-13 13:41   ` Chris Wilson
2013-06-14 17:02   ` Paulo Zanoni
2013-06-12 20:55 ` [PATCH 04/13] drm/i915: split aux_clock_divider logic in a separated function for reuse Rodrigo Vivi
2013-06-14 17:18   ` Paulo Zanoni
2013-06-12 20:55 ` [PATCH 05/13] drm/i915: Enable/Disable PSR Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 06/13] drm/i915: Added debugfs support for PSR Status Rodrigo Vivi
2013-06-12 20:55 ` Rodrigo Vivi [this message]
2013-06-12 20:55 ` [PATCH 08/13] drm/i915: Hook PSR functionality Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 09/13] drm/i915: add update function to disable/enable-back PSR Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 10/13] drm/intel: add enable_psr module option Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 11/13] drm/i915: PSR: Make a clear separation between Sink (Panel) and Source (HW) enabling Rodrigo Vivi
2013-06-13 13:01   ` Daniel Vetter
2013-06-12 20:55 ` [PATCH 12/13] drm/i915: Adding global I915_PARAM for PSR ACTIVE Rodrigo Vivi
2013-06-12 20:55 ` [PATCH 13/13] drm/i915: force psr exit when busy Rodrigo Vivi
2013-06-14 16:21 ` [PATCH 01/13] drm: Added SDP and VSC structures for handling PSR for eDP Paulo Zanoni
2013-06-25  1:56   ` [PATCH] " Rodrigo Vivi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371070554-1947-7-git-send-email-rodrigo.vivi@gmail.com \
    --to=rodrigo.vivi@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).