From: deepak.s@intel.com
To: intel-gfx@lists.freedesktop.org
Cc: Deepak S <deepak.s@intel.com>
Subject: [PATCH v2] drm/i915/vlv: Add drpc debugfs support for valleyview
Date: Fri, 10 Jan 2014 15:18:26 +0530 [thread overview]
Message-ID: <1389347306-16437-1-git-send-email-deepak.s@intel.com> (raw)
From: Deepak S <deepak.s@intel.com>
Many of the fields from Gen6 have gone away for vlv. Strip all those
fields that are not relevent and try to update fields that we care
about. This patch give information about current RP & RC status and
individual Wells.
v2: Move Render & Media Well status to separate lines (Ville)
Signed-off-by: Deepak S <deepak.s@intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 48 ++++++++++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/i915_reg.h | 2 ++
2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 430eb3e..c4c60c2 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1172,6 +1172,50 @@ static int ironlake_drpc_info(struct seq_file *m)
return 0;
}
+static int vlv_drpc_info(struct seq_file *m)
+{
+
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 rpmodectl1, rcctl1;
+ unsigned fw_rendercount = 0, fw_mediacount = 0;
+
+ rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
+ rcctl1 = I915_READ(GEN6_RC_CONTROL);
+
+ seq_printf(m, "Video Turbo Mode: %s\n",
+ yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
+ seq_printf(m, "Turbo enabled: %s\n",
+ yesno(rpmodectl1 & GEN6_RP_ENABLE));
+ seq_printf(m, "HW control enabled: %s\n",
+ yesno(rpmodectl1 & GEN6_RP_ENABLE));
+ seq_printf(m, "SW control enabled: %s\n",
+ yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
+ GEN6_RP_MEDIA_SW_MODE));
+ seq_printf(m, "RC6 Enabled: %s\n",
+ yesno(rcctl1 & (GEN7_RC_CTL_TO_MODE |
+ GEN6_RC_CTL_EI_MODE(1))));
+ seq_printf(m, "Render Power Well: %s\n",
+ (I915_READ(VLV_GTLC_PW_STATUS) &
+ VLV_GTLC_PW_RENDER_STATUS_MASK) ? "Up" : "Down");
+ seq_printf(m, "Media Power Well: %s\n",
+ (I915_READ(VLV_GTLC_PW_STATUS) &
+ VLV_GTLC_PW_MEDIA_STATUS_MASK) ? "Up" : "Down");
+
+ spin_lock_irq(&dev_priv->uncore.lock);
+ fw_rendercount = dev_priv->uncore.fw_rendercount;
+ fw_mediacount = dev_priv->uncore.fw_mediacount;
+ spin_unlock_irq(&dev_priv->uncore.lock);
+
+ seq_printf(m, "Forcewake Render Count = %u\n", fw_rendercount);
+ seq_printf(m, "Forcewake Media Count = %u\n", fw_mediacount);
+
+
+ return 0;
+}
+
+
static int gen6_drpc_info(struct seq_file *m)
{
@@ -1277,7 +1321,9 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
- if (IS_GEN6(dev) || IS_GEN7(dev))
+ if (IS_VALLEYVIEW(dev))
+ return vlv_drpc_info(m);
+ else if (IS_GEN6(dev) || IS_GEN7(dev))
return gen6_drpc_info(m);
else
return ironlake_drpc_info(m);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a699efd..76126e0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4822,6 +4822,8 @@
#define FORCEWAKE_ACK 0x130090
#define VLV_GTLC_WAKE_CTRL 0x130090
#define VLV_GTLC_PW_STATUS 0x130094
+#define VLV_GTLC_PW_RENDER_STATUS_MASK 0x80
+#define VLV_GTLC_PW_MEDIA_STATUS_MASK 0x20
#define FORCEWAKE_MT 0xa188 /* multi-threaded */
#define FORCEWAKE_KERNEL 0x1
#define FORCEWAKE_USER 0x2
--
1.8.4.2
next reply other threads:[~2014-01-10 9:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-10 9:48 deepak.s [this message]
2014-01-10 11:07 ` [PATCH v2] drm/i915/vlv: Add drpc debugfs support for valleyview Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389347306-16437-1-git-send-email-deepak.s@intel.com \
--to=deepak.s@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox