From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 5/3] drm/i915: remove pch_port argument form intel_enable_pipe
Date: Fri, 17 Jan 2014 13:51:10 -0200 [thread overview]
Message-ID: <1389973873-2005-2-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1389973873-2005-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Now that we pass struct intel_crtc as an argument, there's no need for
it.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e5fabba..1e5ad04 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1745,7 +1745,6 @@ static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
/**
* intel_enable_pipe - enable a pipe, asserting requirements
* @crtc: crtc responsible for the pipe
- * @pch_port: on ILK+, is this pipe driving a PCH port or not
* @dsi: output type is DSI
* @wait_for_vblank: whether we should for a vblank or not after enabling it
*
@@ -1753,7 +1752,7 @@ static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
* are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
*/
static void intel_enable_pipe(struct intel_crtc *crtc,
- bool pch_port, bool dsi, bool wait_for_vblank)
+ bool dsi, bool wait_for_vblank)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1784,7 +1783,7 @@ static void intel_enable_pipe(struct intel_crtc *crtc,
else
assert_pll_enabled(dev_priv, pipe);
else {
- if (pch_port) {
+ if (crtc->config.has_pch_encoder) {
/* if driving the PCH, we need FDI enabled */
assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
assert_fdi_tx_pll_enabled(dev_priv,
@@ -3564,8 +3563,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
intel_crtc_load_lut(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, intel_crtc->config.has_pch_encoder, false,
- true);
+ intel_enable_pipe(intel_crtc, false, true);
intel_enable_primary_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
intel_crtc_update_cursor(crtc, true);
@@ -3710,8 +3708,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_ddi_enable_transcoder_func(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, intel_crtc->config.has_pch_encoder, false,
- false);
+ intel_enable_pipe(intel_crtc, false, false);
if (intel_crtc->config.has_pch_encoder)
lpt_pch_enable(crtc);
@@ -4136,7 +4133,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
intel_crtc_load_lut(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, false, is_dsi, true);
+ intel_enable_pipe(intel_crtc, is_dsi, true);
intel_enable_primary_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
intel_crtc_update_cursor(crtc, true);
@@ -4174,7 +4171,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
intel_crtc_load_lut(crtc);
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc, false, false, true);
+ intel_enable_pipe(intel_crtc, false, true);
intel_enable_primary_plane(dev_priv, plane, pipe);
intel_enable_planes(crtc);
/* The fixup needs to happen before cursor is enabled */
--
1.8.4.2
next prev parent reply other threads:[~2014-01-17 15:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-19 21:12 [PATCH 1/3] drm/i915: add wait_for_vblank argument to intel_enable_pipe Paulo Zanoni
2013-12-19 21:12 ` [PATCH 2/3] drm/i915: don't wait for vblank after enabling pipe on HSW Paulo Zanoni
2014-01-15 18:26 ` Jesse Barnes
2013-12-19 21:12 ` [PATCH 3/3] drm/i915: remove the vblank_wait hack from HSW+ Paulo Zanoni
2013-12-19 21:17 ` Daniel Vetter
2013-12-20 14:32 ` Paulo Zanoni
2013-12-20 22:32 ` Lee, Chon Ming
2014-01-02 16:08 ` Paulo Zanoni
2014-01-15 18:28 ` Jesse Barnes
2014-02-12 11:13 ` Ville Syrjälä
2014-02-12 11:26 ` Ville Syrjälä
2014-02-12 17:02 ` Paulo Zanoni
2014-02-12 18:06 ` Ville Syrjälä
2014-02-12 18:35 ` Paulo Zanoni
2013-12-20 6:41 ` [PATCH 1/3] drm/i915: add wait_for_vblank argument to intel_enable_pipe Jani Nikula
2014-01-15 18:25 ` Jesse Barnes
2014-01-15 23:40 ` Daniel Vetter
2014-01-17 15:46 ` Paulo Zanoni
2014-01-17 15:51 ` [PATCH 4/3] drm/i915: pass intel_crtc as argument for intel_enable_pipe Paulo Zanoni
2014-01-17 15:51 ` Paulo Zanoni [this message]
2014-02-10 14:17 ` [PATCH 5/3] drm/i915: remove pch_port argument form intel_enable_pipe Damien Lespiau
2014-01-17 15:51 ` [PATCH 6/3] drm/i915: remove "dsi" " Paulo Zanoni
2014-02-10 14:21 ` Damien Lespiau
2014-02-10 17:19 ` Daniel Vetter
2014-01-17 15:51 ` [PATCH 7/3] drm/i915: remove wait_for_vblank " Paulo Zanoni
2014-02-10 14:33 ` Damien Lespiau
2014-02-10 14:59 ` Ville Syrjälä
2014-01-17 15:51 ` [PATCH 8/3] drm/i915: WARN in case we're enabling the pipe and it's enabled Paulo Zanoni
2014-02-10 14:34 ` Damien Lespiau
2014-02-10 14:17 ` [PATCH 4/3] drm/i915: pass intel_crtc as argument for intel_enable_pipe Damien Lespiau
2014-02-10 17:23 ` Daniel Vetter
2014-02-11 15:23 ` Paulo Zanoni
2014-02-11 15:44 ` Daniel Vetter
2014-02-11 17:09 ` Paulo Zanoni
2014-02-11 17:20 ` Paulo Zanoni
2014-02-11 21:54 ` Daniel Vetter
2014-02-12 15:56 ` Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389973873-2005-2-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox