From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 08/19] drm/i915: get port power domain in connector detect
Date: Tue, 18 Feb 2014 00:02:09 +0200 [thread overview]
Message-ID: <1392674540-10915-9-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1392674540-10915-1-git-send-email-imre.deak@intel.com>
The connector detect and get_mode handlers need to access the port
specific HW blocks to read the EDID etc. Get/put the port power domains
around these handlers.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/intel_crt.c | 42 ++++++++++++++++++++++++++++++++--------
drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++---
drivers/gpu/drm/i915/intel_dsi.c | 13 ++++++++++++-
3 files changed, 59 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9864aa1..2a38429 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -630,7 +630,10 @@ static enum drm_connector_status
intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crt *crt = intel_attached_crt(connector);
+ struct intel_encoder *intel_encoder = &crt->base;
+ enum intel_display_power_domain power_domain;
enum drm_connector_status status;
struct intel_load_detect_pipe tmp;
@@ -638,6 +641,11 @@ intel_crt_detect(struct drm_connector *connector, bool force)
connector->base.id, drm_get_connector_name(connector),
force);
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
+ status = connector_status_connected;
+
if (I915_HAS_HOTPLUG(dev)) {
/* We can not rely on the HPD pin always being correctly wired
* up, for example many KVM do not pass it through, and so
@@ -645,23 +653,27 @@ intel_crt_detect(struct drm_connector *connector, bool force)
*/
if (intel_crt_detect_hotplug(connector)) {
DRM_DEBUG_KMS("CRT detected via hotplug\n");
- return connector_status_connected;
+ goto out;
} else
DRM_DEBUG_KMS("CRT not detected via hotplug\n");
}
if (intel_crt_detect_ddc(connector))
- return connector_status_connected;
+ goto out;
/* Load detection is broken on HPD capable machines. Whoever wants a
* broken monitor (without edid) to work behind a broken kvm (that fails
* to have the right resistors for HP detection) needs to fix this up.
* For now just bail out. */
- if (I915_HAS_HOTPLUG(dev))
- return connector_status_disconnected;
+ if (I915_HAS_HOTPLUG(dev)) {
+ status = connector_status_disconnected;
+ goto out;
+ }
- if (!force)
- return connector->status;
+ if (!force) {
+ status = connector->status;
+ goto out;
+ }
/* for pre-945g platforms use load detect */
if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
@@ -673,6 +685,9 @@ intel_crt_detect(struct drm_connector *connector, bool force)
} else
status = connector_status_unknown;
+out:
+ intel_display_power_put(dev_priv, power_domain);
+
return status;
}
@@ -686,17 +701,28 @@ static int intel_crt_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crt *crt = intel_attached_crt(connector);
+ struct intel_encoder *intel_encoder = &crt->base;
+ enum intel_display_power_domain power_domain;
int ret;
struct i2c_adapter *i2c;
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
ret = intel_crt_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev))
- return ret;
+ goto out;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
- return intel_crt_ddc_get_modes(connector, i2c);
+ ret = intel_crt_ddc_get_modes(connector, i2c);
+
+out:
+ intel_display_power_put(dev_priv, power_domain);
+
+ return ret;
}
static int intel_crt_set_property(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f53c95c..9c39425 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3224,9 +3224,11 @@ intel_dp_detect(struct drm_connector *connector, bool force)
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum drm_connector_status status;
+ enum intel_display_power_domain power_domain;
struct edid *edid = NULL;
- intel_runtime_pm_get(dev_priv);
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, drm_get_connector_name(connector));
@@ -3256,23 +3258,31 @@ intel_dp_detect(struct drm_connector *connector, bool force)
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
status = connector_status_connected;
-
out:
- intel_runtime_pm_put(dev_priv);
+ intel_display_power_put(dev_priv, power_domain);
+
return status;
}
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum intel_display_power_domain power_domain;
int ret;
/* We should parse the EDID data and find out if it has an audio sink
*/
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
+ intel_display_power_put(dev_priv, power_domain);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3ee1db1..63b95bbd 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -488,8 +488,19 @@ static enum drm_connector_status
intel_dsi_detect(struct drm_connector *connector, bool force)
{
struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
+ struct intel_encoder *intel_encoder = &intel_dsi->base;
+ enum intel_display_power_domain power_domain;
+ enum drm_connector_status connector_status;
+ struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
+
DRM_DEBUG_KMS("\n");
- return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+ power_domain = intel_display_port_power_domain(intel_encoder);
+
+ intel_display_power_get(dev_priv, power_domain);
+ connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+ intel_display_power_put(dev_priv, power_domain);
+
+ return connector_status;
}
static int intel_dsi_get_modes(struct drm_connector *connector)
--
1.8.4
next prev parent reply other threads:[~2014-02-17 22:02 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 22:02 [PATCH 00/19] drm/i915: vlv power domains support Imre Deak
2014-02-17 22:02 ` [PATCH 01/19] drm/i915: use drm_i915_private everywhere in the power domain api Imre Deak
2014-02-20 19:16 ` Jesse Barnes
2014-02-17 22:02 ` [PATCH 02/19] drm/i915: fold in __intel_power_well_get/put functions Imre Deak
2014-02-20 19:17 ` Jesse Barnes
2014-02-20 19:44 ` Chris Wilson
2014-02-24 13:23 ` Paulo Zanoni
2014-02-24 14:07 ` Imre Deak
2014-02-17 22:02 ` [PATCH 03/19] drm/i915: move modeset_update_power_wells earlier Imre Deak
2014-02-20 19:18 ` Jesse Barnes
2014-02-17 22:02 ` [PATCH 04/19] drm/i915: move power domain macros to intel_pm.c Imre Deak
2014-02-20 19:21 ` Jesse Barnes
2014-02-24 13:38 ` Paulo Zanoni
2014-02-24 13:54 ` Imre Deak
2014-02-17 22:02 ` [PATCH 05/19] drm/i915: power domains: add power well ops Imre Deak
2014-02-20 19:26 ` Jesse Barnes
2014-02-24 11:42 ` Imre Deak
2014-02-17 22:02 ` [PATCH 06/19] drm/i915: remove power_well->always_on flag Imre Deak
2014-02-20 19:27 ` Jesse Barnes
2014-02-17 22:02 ` [PATCH 07/19] drm/i915: add port power domains Imre Deak
2014-02-20 19:31 ` Jesse Barnes
2014-02-24 11:52 ` Imre Deak
2014-03-05 10:11 ` Daniel Vetter
2014-02-17 22:02 ` Imre Deak [this message]
2014-02-19 12:35 ` [PATCH 08/19] drm/i915: get port power domain in connector detect Ville Syrjälä
2014-02-19 12:39 ` Imre Deak
2014-02-20 19:33 ` Jesse Barnes
2014-02-24 11:56 ` Imre Deak
2014-03-05 10:15 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 09/19] drm/i915: check port power domain when reading the encoder hw state Imre Deak
2014-02-20 19:36 ` Jesse Barnes
2014-02-24 12:53 ` Imre Deak
2014-03-05 10:21 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 10/19] drm/i915: check pipe power domain when reading its " Imre Deak
2014-02-20 19:37 ` Jesse Barnes
2014-03-05 10:24 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 11/19] drm/i915: vlv: keep first level vblank IRQs masked Imre Deak
2014-02-18 16:54 ` Ville Syrjälä
2014-02-17 22:02 ` [PATCH 12/19] drm/i915: sanitize PUNIT register macro definitions Imre Deak
2014-02-20 19:46 ` Jesse Barnes
2014-02-24 13:12 ` Imre Deak
2014-02-17 22:02 ` [PATCH 13/19] drm/i915: factor out reset_vblank_counter Imre Deak
2014-02-18 16:55 ` Ville Syrjälä
2014-02-17 22:02 ` [PATCH 14/19] drm/i915: switch order of power domain init wrt. irq install Imre Deak
2014-02-20 19:48 ` Jesse Barnes
2014-02-24 13:23 ` Imre Deak
2014-03-05 10:29 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 15/19] drm/i915: use power domain api to check vga power state Imre Deak
2014-02-20 19:51 ` Jesse Barnes
2014-03-05 10:31 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 16/19] drm/i915: sanity check power well sw state against hw state Imre Deak
2014-02-18 16:55 ` Ville Syrjälä
2014-02-18 17:37 ` Imre Deak
2014-02-18 17:59 ` Ville Syrjälä
2014-03-05 10:32 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 17/19] drm/i915: vlv: factor out valleyview_display_irq_install Imre Deak
2014-02-20 19:56 ` Jesse Barnes
2014-02-24 13:34 ` Imre Deak
2014-02-17 22:02 ` [PATCH 18/19] drm/i915: move hsw power domain comment to its right place Imre Deak
2014-02-20 19:53 ` Jesse Barnes
2014-03-05 10:34 ` Daniel Vetter
2014-02-17 22:02 ` [PATCH 19/19] drm/i915: power domains: add vlv power wells Imre Deak
2014-02-19 12:29 ` Ville Syrjälä
2014-02-20 19:58 ` Jesse Barnes
2014-02-26 18:02 ` Imre Deak
2014-02-26 19:52 ` Jesse Barnes
2014-02-27 10:03 ` Imre Deak
2014-03-05 10:38 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392674540-10915-9-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox