From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 18/23] drm/i915: remove dev_priv->pc8.enabled
Date: Thu, 27 Feb 2014 19:26:45 -0300 [thread overview]
Message-ID: <1393540010-1582-19-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1393540010-1582-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
It was just being used on debugfs and on a WARN inside
hsw_set_power_well. But now that we PC8 is part of runtime PM and we
get/put runtime PM when we get/put any power domain, we shouldn't need
the WARN anymore.
v2: - Rebase.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 1 -
drivers/gpu/drm/i915/i915_drv.h | 2 --
drivers/gpu/drm/i915/intel_display.c | 3 ---
drivers/gpu/drm/i915/intel_pm.c | 3 ---
4 files changed, 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index ad6c209..93d6065 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2000,7 +2000,6 @@ static int i915_pc8_status(struct seq_file *m, void *unused)
seq_printf(m, "GPU idle: %s\n", yesno(!dev_priv->mm.busy));
seq_printf(m, "IRQs disabled: %s\n",
yesno(dev_priv->pc8.irqs_disabled));
- seq_printf(m, "Enabled: %s\n", yesno(dev_priv->pc8.enabled));
mutex_unlock(&dev_priv->pc8.lock);
return 0;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8b66c14..16e344e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1351,8 +1351,6 @@ struct ilk_wm_values {
*/
struct i915_package_c8 {
bool irqs_disabled;
- /* Only true after the delayed work task actually enables it. */
- bool enabled;
struct mutex lock;
struct {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d9ea9b89..271dd66 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6660,8 +6660,6 @@ void __hsw_do_enable_pc8(struct drm_i915_private *dev_priv)
DRM_DEBUG_KMS("Enabling package C8+\n");
- dev_priv->pc8.enabled = true;
-
if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
@@ -6697,7 +6695,6 @@ void __hsw_do_disable_pc8(struct drm_i915_private *dev_priv)
mutex_lock(&dev_priv->rps.hw_lock);
gen6_update_ring_freq(dev);
mutex_unlock(&dev_priv->rps.hw_lock);
- dev_priv->pc8.enabled = false;
}
#define for_each_power_domain(domain, mask) \
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 78f56e8..c85507a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5278,8 +5278,6 @@ static void hsw_set_power_well(struct drm_device *dev,
bool is_enabled, enable_requested;
uint32_t tmp;
- WARN_ON(dev_priv->pc8.enabled);
-
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
@@ -5773,7 +5771,6 @@ void intel_pm_setup(struct drm_device *dev)
mutex_init(&dev_priv->pc8.lock);
dev_priv->pc8.irqs_disabled = false;
- dev_priv->pc8.enabled = false;
INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work,
intel_gen6_powersave_work);
}
--
1.8.5.3
next prev parent reply other threads:[~2014-02-27 22:27 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 22:26 [PATCH 00/23] Merge PC8 with runtime PM, v2 Paulo Zanoni
2014-02-27 22:26 ` [PATCH 01/23] drm/i915: Accurately track when we mark the hardware as idle/busy Paulo Zanoni
2014-02-27 22:26 ` [PATCH 02/23] drm/i915: put runtime PM only at the end of intel_mark_idle Paulo Zanoni
2014-02-27 22:26 ` [PATCH 03/23] drm/i915: put runtime PM only when we actually release force_wake Paulo Zanoni
2014-02-27 22:26 ` [PATCH 04/23] drm/i915: kill dev_priv->pc8.gpu_idle Paulo Zanoni
2014-02-28 15:23 ` Imre Deak
2014-02-27 22:26 ` [PATCH 05/23] drm/i915: rename modeset_update_power_wells Paulo Zanoni
2014-02-27 22:26 ` [PATCH 06/23] drm/i915: get/put runtime PM without holding rps.hw_lock Paulo Zanoni
2014-02-27 22:26 ` [PATCH 07/23] drm/i915: add forcewake functions that don't touch runtime PM Paulo Zanoni
2014-02-28 8:44 ` Chris Wilson
2014-02-28 19:38 ` Paulo Zanoni
2014-02-28 19:46 ` Chris Wilson
2014-03-05 16:56 ` Daniel Vetter
2014-02-27 22:26 ` [PATCH 08/23] drm/i915: extract __hsw_do_{en, dis}able_package_c8 Paulo Zanoni
2014-02-27 22:26 ` [PATCH 09/23] drm/i915: make PC8 be part of runtime PM suspend/resume Paulo Zanoni
2014-02-28 9:42 ` Chris Wilson
2014-03-06 22:48 ` Daniel Vetter
2014-02-27 22:26 ` [PATCH 10/23] drm/i915: get/put runtime PM when we get/put a power domain Paulo Zanoni
2014-02-28 15:45 ` Imre Deak
2014-02-28 19:54 ` Paulo Zanoni
2014-02-27 22:26 ` [PATCH 11/23] drm/i915: remove dev_priv->pc8.requirements_met Paulo Zanoni
2014-02-27 22:26 ` [PATCH 12/23] drm/i915: get runtime PM references when the GPU is idle/busy Paulo Zanoni
2014-02-28 17:08 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 13/23] drm/i915: kill pc8.disable_count Paulo Zanoni
2014-02-28 17:10 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 14/23] drm/i915: remove an indirection level on PC8 functions Paulo Zanoni
2014-02-28 17:11 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 15/23] drm/i915: don't get/put PC8 reference on freeze/thaw Paulo Zanoni
2014-02-28 17:11 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 16/23] drm/i915: get/put runtime PM references for GMBUS and DP AUX Paulo Zanoni
2014-02-28 17:13 ` Jesse Barnes
2014-02-28 17:38 ` Imre Deak
2014-02-28 17:55 ` Jesse Barnes
2014-02-28 18:20 ` Imre Deak
2014-02-28 19:07 ` Paulo Zanoni
2014-03-05 17:04 ` Daniel Vetter
2014-02-27 22:26 ` [PATCH 17/23] drm/i915: don't get/put PC8 when getting/putting power wells Paulo Zanoni
2014-02-28 17:13 ` Jesse Barnes
2014-02-27 22:26 ` Paulo Zanoni [this message]
2014-02-28 17:14 ` [PATCH 18/23] drm/i915: remove dev_priv->pc8.enabled Jesse Barnes
2014-02-27 22:26 ` [PATCH 19/23] drm/i915: move pc8.irqs_disabled to pm.irqs_disabled Paulo Zanoni
2014-02-28 17:15 ` Jesse Barnes
2014-02-28 18:17 ` Paulo Zanoni
2014-02-27 22:26 ` [PATCH 20/23] drm/i915: kill struct i915_package_c8 Paulo Zanoni
2014-02-28 17:16 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 21/23] drm/i915: rename __hsw_do_{en, dis}able_pc8 Paulo Zanoni
2014-02-28 17:17 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 22/23] drm/i915: update the PC8 and runtime PM documentation Paulo Zanoni
2014-02-28 17:19 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 23/23] drm/i915: init pm.suspended earlier Paulo Zanoni
2014-02-28 17:20 ` Jesse Barnes
2014-03-05 17:09 ` [PATCH 00/23] Merge PC8 with runtime PM, v2 Daniel Vetter
2014-03-06 22:23 ` Paulo Zanoni
2014-03-06 22:45 ` Daniel Vetter
2014-03-07 8:51 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393540010-1582-19-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox