From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 03/23] drm/i915: put runtime PM only when we actually release force_wake
Date: Thu, 27 Feb 2014 19:26:30 -0300 [thread overview]
Message-ID: <1393540010-1582-4-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1393540010-1582-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
When we call gen6_gt_force_wake_put we don't actually put force_wake,
we just schedule gen6_force_wake_work through mod_delayed_work, and
that will eventually release force_wake.
The problem is that we call intel_runtime_pm_put directly at
gen6_gt_force_wake_put, so most of the times we put our runtime PM
reference before the delayed work happens, so we may runtime suspend
while force_wake is still supposed to be enabled if the graphics
autosuspend_delay_ms is too small.
Now the nice thing about the current code is that after it triggers
the delayed work function it gets a refcount, and it only triggers the
delayed work function if refcount is zero. This guarantees that when
we schedule the funciton, it will run before we try to schedule it
again, which simplifies the problem and allows for the current
solution to work properly (hopefully!).
v2: - Keep the VLV refcounts balanced (Jesse)
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_uncore.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index c628414..6a21f43 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -299,6 +299,8 @@ static void gen6_force_wake_work(struct work_struct *work)
if (--dev_priv->uncore.forcewake_count == 0)
dev_priv->uncore.funcs.force_wake_put(dev_priv, FORCEWAKE_ALL);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
+
+ intel_runtime_pm_put(dev_priv);
}
static void intel_uncore_forcewake_reset(struct drm_device *dev)
@@ -393,25 +395,31 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv, int fw_engine)
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv, int fw_engine)
{
unsigned long irqflags;
+ bool delayed = false;
if (!dev_priv->uncore.funcs.force_wake_put)
return;
/* Redirect to VLV specific routine */
- if (IS_VALLEYVIEW(dev_priv->dev))
- return vlv_force_wake_put(dev_priv, fw_engine);
+ if (IS_VALLEYVIEW(dev_priv->dev)) {
+ vlv_force_wake_put(dev_priv, fw_engine);
+ goto out;
+ }
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
if (--dev_priv->uncore.forcewake_count == 0) {
dev_priv->uncore.forcewake_count++;
+ delayed = true;
mod_delayed_work(dev_priv->wq,
&dev_priv->uncore.force_wake_work,
1);
}
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
- intel_runtime_pm_put(dev_priv);
+out:
+ if (!delayed)
+ intel_runtime_pm_put(dev_priv);
}
/* We give fast paths for the really cool registers */
--
1.8.5.3
next prev parent reply other threads:[~2014-02-27 22:27 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 22:26 [PATCH 00/23] Merge PC8 with runtime PM, v2 Paulo Zanoni
2014-02-27 22:26 ` [PATCH 01/23] drm/i915: Accurately track when we mark the hardware as idle/busy Paulo Zanoni
2014-02-27 22:26 ` [PATCH 02/23] drm/i915: put runtime PM only at the end of intel_mark_idle Paulo Zanoni
2014-02-27 22:26 ` Paulo Zanoni [this message]
2014-02-27 22:26 ` [PATCH 04/23] drm/i915: kill dev_priv->pc8.gpu_idle Paulo Zanoni
2014-02-28 15:23 ` Imre Deak
2014-02-27 22:26 ` [PATCH 05/23] drm/i915: rename modeset_update_power_wells Paulo Zanoni
2014-02-27 22:26 ` [PATCH 06/23] drm/i915: get/put runtime PM without holding rps.hw_lock Paulo Zanoni
2014-02-27 22:26 ` [PATCH 07/23] drm/i915: add forcewake functions that don't touch runtime PM Paulo Zanoni
2014-02-28 8:44 ` Chris Wilson
2014-02-28 19:38 ` Paulo Zanoni
2014-02-28 19:46 ` Chris Wilson
2014-03-05 16:56 ` Daniel Vetter
2014-02-27 22:26 ` [PATCH 08/23] drm/i915: extract __hsw_do_{en, dis}able_package_c8 Paulo Zanoni
2014-02-27 22:26 ` [PATCH 09/23] drm/i915: make PC8 be part of runtime PM suspend/resume Paulo Zanoni
2014-02-28 9:42 ` Chris Wilson
2014-03-06 22:48 ` Daniel Vetter
2014-02-27 22:26 ` [PATCH 10/23] drm/i915: get/put runtime PM when we get/put a power domain Paulo Zanoni
2014-02-28 15:45 ` Imre Deak
2014-02-28 19:54 ` Paulo Zanoni
2014-02-27 22:26 ` [PATCH 11/23] drm/i915: remove dev_priv->pc8.requirements_met Paulo Zanoni
2014-02-27 22:26 ` [PATCH 12/23] drm/i915: get runtime PM references when the GPU is idle/busy Paulo Zanoni
2014-02-28 17:08 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 13/23] drm/i915: kill pc8.disable_count Paulo Zanoni
2014-02-28 17:10 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 14/23] drm/i915: remove an indirection level on PC8 functions Paulo Zanoni
2014-02-28 17:11 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 15/23] drm/i915: don't get/put PC8 reference on freeze/thaw Paulo Zanoni
2014-02-28 17:11 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 16/23] drm/i915: get/put runtime PM references for GMBUS and DP AUX Paulo Zanoni
2014-02-28 17:13 ` Jesse Barnes
2014-02-28 17:38 ` Imre Deak
2014-02-28 17:55 ` Jesse Barnes
2014-02-28 18:20 ` Imre Deak
2014-02-28 19:07 ` Paulo Zanoni
2014-03-05 17:04 ` Daniel Vetter
2014-02-27 22:26 ` [PATCH 17/23] drm/i915: don't get/put PC8 when getting/putting power wells Paulo Zanoni
2014-02-28 17:13 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 18/23] drm/i915: remove dev_priv->pc8.enabled Paulo Zanoni
2014-02-28 17:14 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 19/23] drm/i915: move pc8.irqs_disabled to pm.irqs_disabled Paulo Zanoni
2014-02-28 17:15 ` Jesse Barnes
2014-02-28 18:17 ` Paulo Zanoni
2014-02-27 22:26 ` [PATCH 20/23] drm/i915: kill struct i915_package_c8 Paulo Zanoni
2014-02-28 17:16 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 21/23] drm/i915: rename __hsw_do_{en, dis}able_pc8 Paulo Zanoni
2014-02-28 17:17 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 22/23] drm/i915: update the PC8 and runtime PM documentation Paulo Zanoni
2014-02-28 17:19 ` Jesse Barnes
2014-02-27 22:26 ` [PATCH 23/23] drm/i915: init pm.suspended earlier Paulo Zanoni
2014-02-28 17:20 ` Jesse Barnes
2014-03-05 17:09 ` [PATCH 00/23] Merge PC8 with runtime PM, v2 Daniel Vetter
2014-03-06 22:23 ` Paulo Zanoni
2014-03-06 22:45 ` Daniel Vetter
2014-03-07 8:51 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393540010-1582-4-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox