[PATCH 1/7] drm/i915: Program Rcomp and band gap reset everytime we resume from power gate

[Shobhit Kumar <shobhit.kumar@intel.com>]

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3365664..7ceb8c6 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -110,6 +110,15 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("\n");
 
+	mutex_lock(&dev_priv->dpio_lock);
+	/* program rcomp for compliance, reduce from 50 ohms to 45 ohms
+	 * needed everytime after power gate */
+	vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
+	mutex_unlock(&dev_priv->dpio_lock);
+
+	/* bandgap reset is needed after everytime we do power gate */
+	band_gap_reset(dev_priv);
+
 	val = I915_READ(MIPI_PORT_CTRL(pipe));
 	I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD);
 	usleep_range(1000, 1500);
@@ -379,9 +388,6 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder)
 
 	DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
 
-	/* XXX: Location of the call */
-	band_gap_reset(dev_priv);
-
 	/* escape clock divider, 20MHz, shared for A and C. device ready must be
 	 * off when doing this! txclkesc? */
 	tmp = I915_READ(MIPI_CTRL(0));
-- 
1.8.3.2