From: Kamal Mostafa <kamal@canonical.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: aaron.lu@intel.com, intel-gfx@lists.freedesktop.org,
kent.baxley@canonical.com, stable@vger.kernel.org,
EGriffith92@gmail.com
Subject: Re: [PATCH 2/2] drm/i915: do not setup backlight if not available according to VBT
Date: Wed, 09 Apr 2014 10:01:49 -0700 [thread overview]
Message-ID: <1397062909.9751.8.camel@fourier> (raw)
In-Reply-To: <1397039735-2561-2-git-send-email-jani.nikula@intel.com>
[-- Attachment #1.1: Type: text/plain, Size: 2331 bytes --]
On Wed, 2014-04-09 at 13:35 +0300, Jani Nikula wrote:
> Some machines use an external EC for controlling the backlight. Info
> about this is present in the VBT. Do not setup native backlight control
> if no PWM backlight is available or supported according to VBT. The
> acpi_backlight interface appears to work for the EC control.
>
> In most cases there has been no harm done, but it looks like there are
> machines out there that have both an EC and our PWM line connected to
> the same wire. This, obviously, does not end well.
>
> This should fix the regression caused by
> commit bc0bb9fd1c7810407ab810d204bbaecb255fddde
> Author: Jani Nikula <jani.nikula@intel.com>
> Date: Thu Nov 14 12:14:29 2013 +0200
>
> drm/i915: remove QUIRK_NO_PCH_PWM_ENABLE
Works great! These patches do indeed re-fix backlight control in v3.14,
on both of the two XPS13 models that had needed the NO_PCH_PWM_ENABLE
quirk.
Tested-by: Kamal Mostafa <kamal@canonical.com>
Thanks Jani!
-Kamal
> AFAICT the quirk removed by the above commit effectively resulted in
> i915 not driving the backlight PWM output, thus not messing things up.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76276
> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=47941
> CC: Aaron Lu <aaron.lu@intel.com>
> CC: Kamal Mostafa <kamal@canonical.com>
> CC: Eric Griffith <EGriffith92@gmail.com>
> CC: Kent Baxley <kent.baxley@canonical.com>
> CC: stable@vger.kernel.org [v3.14+]
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/intel_panel.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index cb058408c70e..0eead16aeda7 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -1065,6 +1065,11 @@ int intel_panel_setup_backlight(struct drm_connector *connector)
> unsigned long flags;
> int ret;
>
> + if (!dev_priv->vbt.backlight.present) {
> + DRM_DEBUG_KMS("native backlight control not available per VBT\n");
> + return 0;
> + }
> +
> /* set level and max in panel struct */
> spin_lock_irqsave(&dev_priv->backlight_lock, flags);
> ret = dev_priv->display.setup_backlight(intel_connector);
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2014-04-09 17:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 10:35 [PATCH 1/2] drm/i915: check VBT for supported backlight type Jani Nikula
2014-04-09 10:35 ` [PATCH 2/2] drm/i915: do not setup backlight if not available according to VBT Jani Nikula
2014-04-09 13:45 ` Daniel Vetter
2014-04-10 8:09 ` Jani Nikula
2014-04-09 17:01 ` Kamal Mostafa [this message]
2014-04-09 11:44 ` [Intel-gfx] [PATCH 1/2] drm/i915: check VBT for supported backlight type Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397062909.9751.8.camel@fourier \
--to=kamal@canonical.com \
--cc=EGriffith92@gmail.com \
--cc=aaron.lu@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=kent.baxley@canonical.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox