From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 01/25] drm/i915: vlv: clean up GTLC wake control/status register macros
Date: Mon, 14 Apr 2014 20:24:22 +0300 [thread overview]
Message-ID: <1397496286-29649-2-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1397496286-29649-1-git-send-email-imre.deak@intel.com>
These will be needed by the upcoming VLV RPM helpers.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/i915_gem.c | 5 +++--
drivers/gpu/drm/i915/i915_reg.h | 10 ++++++++--
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 8f5ffab..af8493a 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4459,8 +4459,9 @@ int i915_gem_init(struct drm_device *dev)
if (IS_VALLEYVIEW(dev)) {
/* VLVA0 (potential hack), BIOS isn't actually waking us */
- I915_WRITE(VLV_GTLC_WAKE_CTRL, 1);
- if (wait_for((I915_READ(VLV_GTLC_PW_STATUS) & 1) == 1, 10))
+ I915_WRITE(VLV_GTLC_WAKE_CTRL, VLV_GTLC_ALLOWWAKEREQ);
+ if (wait_for((I915_READ(VLV_GTLC_PW_STATUS) &
+ VLV_GTLC_ALLOWWAKEACK), 10))
DRM_DEBUG_DRIVER("allow wake ack timed out\n");
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8f84555..ee768f0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4996,9 +4996,15 @@ enum punit_power_well {
#define FORCEWAKE_ACK_HSW 0x130044
#define FORCEWAKE_ACK 0x130090
#define VLV_GTLC_WAKE_CTRL 0x130090
+#define VLV_GTLC_RENDER_CTX_EXISTS (1 << 25)
+#define VLV_GTLC_MEDIA_CTX_EXISTS (1 << 24)
+#define VLV_GTLC_ALLOWWAKEREQ (1 << 0)
+
#define VLV_GTLC_PW_STATUS 0x130094
-#define VLV_GTLC_PW_RENDER_STATUS_MASK 0x80
-#define VLV_GTLC_PW_MEDIA_STATUS_MASK 0x20
+#define VLV_GTLC_ALLOWWAKEACK (1 << 0)
+#define VLV_GTLC_ALLOWWAKEERR (1 << 1)
+#define VLV_GTLC_PW_MEDIA_STATUS_MASK (1 << 5)
+#define VLV_GTLC_PW_RENDER_STATUS_MASK (1 << 7)
#define FORCEWAKE_MT 0xa188 /* multi-threaded */
#define FORCEWAKE_KERNEL 0x1
#define FORCEWAKE_USER 0x2
--
1.8.4
next prev parent reply other threads:[~2014-04-14 17:24 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 17:24 [PATCH v2 00/25] vlv: add support for RPM Imre Deak
2014-04-14 17:24 ` Imre Deak [this message]
2014-04-24 21:04 ` [PATCH v2 01/25] drm/i915: vlv: clean up GTLC wake control/status register macros Rodrigo Vivi
2014-04-14 17:24 ` [PATCH v2 02/25] drm/i915: vlv: clear master interrupt flag when disabling interrupts Imre Deak
2014-04-14 17:24 ` [PATCH v2 03/25] drm/i915: vlv: add RC6 residency counters Imre Deak
2014-04-14 17:24 ` [PATCH v2 04/25] drm/i915: fix the RC6 status debug print Imre Deak
2014-04-14 17:24 ` [PATCH v2 05/25] drm/i915: remove the i915_dpio debugfs entry Imre Deak
2014-04-14 17:24 ` [PATCH v2 06/25] drm/i915: get a runtime PM ref for debugfs entries where needed Imre Deak
2014-04-14 17:24 ` [PATCH v2 07/25] drm/i915: move getting struct_mutex lower in the callstack during GPU reset Imre Deak
2014-04-14 17:24 ` [PATCH v2 08/25] drm/i915: get a runtime PM ref for the deferred GT powersave enabling Imre Deak
2014-04-25 7:59 ` Daniel Vetter
2014-04-25 8:14 ` Imre Deak
2014-04-25 9:09 ` Daniel Vetter
2014-04-25 8:01 ` Daniel Vetter
2014-04-14 17:24 ` [PATCH v2 09/25] drm/i915: get a runtime PM ref for the deferred GPU reset work Imre Deak
2014-04-16 12:11 ` Ville Syrjälä
2014-04-18 12:47 ` [PATCH v3] " Imre Deak
2014-04-22 19:38 ` Daniel Vetter
2014-04-22 20:34 ` Imre Deak
2014-04-22 21:05 ` Daniel Vetter
2014-04-22 22:13 ` [PATCH v4] " Imre Deak
2014-04-23 7:07 ` Daniel Vetter
2014-04-23 7:52 ` Imre Deak
2014-04-25 8:00 ` Daniel Vetter
2014-04-14 17:24 ` [PATCH v2 10/25] drm/i915: gen2: move error capture of IER to its correct place Imre Deak
2014-04-16 12:22 ` Ville Syrjälä
2014-04-16 12:57 ` Imre Deak
2014-04-24 21:06 ` Rodrigo Vivi
2014-04-14 17:24 ` [PATCH v2 11/25] drm/i915: add missing error capturing of the PIPESTAT reg Imre Deak
2014-04-16 12:17 ` Ville Syrjälä
2014-04-18 11:44 ` Imre Deak
2014-04-18 12:55 ` [PATCH v3 " Imre Deak
2014-04-23 7:53 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 12/25] drm/i915: vlv: check port power domain instead of only D0 for eDP VDD on Imre Deak
2014-04-14 17:24 ` [PATCH v2 13/25] drm/i915: fix unbalanced GT powersave enable / disable calls Imre Deak
2014-04-14 17:24 ` [PATCH v2 14/25] drm/i915: sanitize enable_rc6 option Imre Deak
2014-04-16 12:28 ` Ville Syrjälä
2014-04-16 12:37 ` Imre Deak
2014-04-18 13:01 ` [PATCH v3 " Imre Deak
2014-04-23 7:58 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 15/25] drm/i915: disable runtime PM if RC6 is disabled Imre Deak
2014-04-14 17:24 ` [PATCH v2 16/25] drm/i915: make runtime PM interrupt enable/disable platform independent Imre Deak
2014-04-14 17:24 ` [PATCH v2 17/25] drm/i915: factor out gen6_update_ring_freq Imre Deak
2014-04-16 17:31 ` Ville Syrjälä
2014-04-18 13:16 ` [PATCH v3 " Imre Deak
2014-04-23 7:59 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 18/25] drm/i915: make runtime PM swizzling/ring_freq init platform independent Imre Deak
2014-04-14 17:24 ` [PATCH v2 19/25] drm/i915: reinit GT power save during resume Imre Deak
2014-04-16 17:46 ` Ville Syrjälä
2014-04-18 10:51 ` Imre Deak
2014-04-22 17:21 ` [PATCH v3 " Imre Deak
2014-04-23 8:06 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 20/25] drm/i915: vlv: setup RPS min/max frequencies once during init time Imre Deak
2014-04-14 17:24 ` [PATCH v2 21/25] drm/i915: vlv: factor out vlv_force_gfx_clock Imre Deak
2014-04-16 17:49 ` Ville Syrjälä
2014-04-18 13:35 ` [PATCH v3 21/25] drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-off Imre Deak
2014-04-23 8:11 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 22/25] drm/i915: vlv: increase timeout when forcing on the GFX clock Imre Deak
2014-04-25 14:04 ` Daniel Vetter
2014-04-14 17:24 ` [PATCH v2 23/25] drm/i915: add various missing GTI/Gunit register definitions Imre Deak
2014-04-24 21:17 ` Rodrigo Vivi
2014-04-24 21:49 ` Imre Deak
2014-04-30 14:32 ` Ville Syrjälä
2014-05-05 11:43 ` Imre Deak
2014-05-05 12:13 ` [PATCH v3 " Imre Deak
2014-05-05 12:21 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 24/25] drm/i915: propagate the error code from runtime PM callbacks Imre Deak
2014-04-15 13:39 ` [PATCH v3 " Imre Deak
2014-04-30 18:05 ` Ville Syrjälä
2014-04-30 18:53 ` Imre Deak
2014-05-05 12:44 ` Ville Syrjälä
2014-05-05 13:18 ` Imre Deak
2014-04-14 17:24 ` [PATCH v2 25/25] drm/i915: vlv: add runtime PM support Imre Deak
2014-04-16 12:39 ` Ville Syrjälä
2014-04-16 14:53 ` Daniel Vetter
2014-04-16 16:01 ` Imre Deak
2014-04-22 17:28 ` [PATCH v3 " Imre Deak
2014-04-22 22:09 ` [PATCH v4] drm/i915: get a runtime PM ref for the deferred GPU reset work Imre Deak
2014-04-24 21:02 ` Rodrigo Vivi
2014-04-30 17:35 ` [PATCH v3 25/25] drm/i915: vlv: add runtime PM support Ville Syrjälä
2014-05-05 9:33 ` Daniel Vetter
2014-05-05 12:19 ` [PATCH v4 " Imre Deak
2014-04-14 17:41 ` [PATCH v2 26/25] drm/i915: vlv: enable runtime PM Imre Deak
2014-05-06 19:39 ` Daniel Vetter
2014-04-17 11:00 ` [PATCH v2 00/25] vlv: add support for RPM Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397496286-29649-2-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox