From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 21/25] drm/i915: vlv: factor out vlv_force_gfx_clock
Date: Mon, 14 Apr 2014 20:24:42 +0300 [thread overview]
Message-ID: <1397496286-29649-22-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1397496286-29649-1-git-send-email-imre.deak@intel.com>
This will be needed by the VLV runtime PM helpers too, so factor it out.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 37 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 16 ++--------------
3 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 1f88917..0609f77 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -905,6 +905,43 @@ static void hsw_runtime_resume(struct drm_i915_private *dev_priv)
hsw_disable_pc8(dev_priv);
}
+int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on)
+{
+ u32 val;
+ int err;
+
+ val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
+ WARN_ON(!!(val & VLV_GFX_CLK_FORCE_ON_BIT) == force_on);
+
+#define COND (I915_READ(VLV_GTLC_SURVIVABILITY_REG) & VLV_GFX_CLK_STATUS_BIT)
+ /* Wait for a previous force on/off to settle */
+ if (force_on) {
+ err = wait_for(!COND, 5);
+ if (err) {
+ DRM_ERROR("timeout waiting for GFX clock force-off (%08x)\n",
+ I915_READ(VLV_GTLC_SURVIVABILITY_REG));
+ return err;
+ }
+ }
+
+ val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
+ val &= ~VLV_GFX_CLK_FORCE_ON_BIT;
+ if (force_on)
+ val |= VLV_GFX_CLK_FORCE_ON_BIT;
+ I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val);
+
+ if (!force_on)
+ return 0;
+
+ err = wait_for(COND, 5);
+ if (err)
+ DRM_ERROR("timeout waiting for GFX clock force-on (%08x)\n",
+ I915_READ(VLV_GTLC_SURVIVABILITY_REG));
+
+ return err;
+#undef COND
+}
+
static int intel_runtime_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5254f4b..3cac434 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1968,6 +1968,7 @@ extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
+int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool on);
extern void intel_console_resume(struct work_struct *work);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index bc38213..5a61075 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3129,16 +3129,7 @@ static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
/* Mask turbo interrupt so that they will not come in between */
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
- /* Bring up the Gfx clock */
- I915_WRITE(VLV_GTLC_SURVIVABILITY_REG,
- I915_READ(VLV_GTLC_SURVIVABILITY_REG) |
- VLV_GFX_CLK_FORCE_ON_BIT);
-
- if (wait_for(((VLV_GFX_CLK_STATUS_BIT &
- I915_READ(VLV_GTLC_SURVIVABILITY_REG)) != 0), 5)) {
- DRM_ERROR("GFX_CLK_ON request timed out\n");
- return;
- }
+ vlv_force_gfx_clock(dev_priv, true);
dev_priv->rps.cur_freq = dev_priv->rps.min_freq_softlimit;
@@ -3149,10 +3140,7 @@ static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
& GENFREQSTATUS) == 0, 5))
DRM_ERROR("timed out waiting for Punit\n");
- /* Release the Gfx clock */
- I915_WRITE(VLV_GTLC_SURVIVABILITY_REG,
- I915_READ(VLV_GTLC_SURVIVABILITY_REG) &
- ~VLV_GFX_CLK_FORCE_ON_BIT);
+ vlv_force_gfx_clock(dev_priv, false);
I915_WRITE(GEN6_PMINTRMSK,
gen6_rps_pm_mask(dev_priv, dev_priv->rps.cur_freq));
--
1.8.4
next prev parent reply other threads:[~2014-04-14 17:26 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 17:24 [PATCH v2 00/25] vlv: add support for RPM Imre Deak
2014-04-14 17:24 ` [PATCH v2 01/25] drm/i915: vlv: clean up GTLC wake control/status register macros Imre Deak
2014-04-24 21:04 ` Rodrigo Vivi
2014-04-14 17:24 ` [PATCH v2 02/25] drm/i915: vlv: clear master interrupt flag when disabling interrupts Imre Deak
2014-04-14 17:24 ` [PATCH v2 03/25] drm/i915: vlv: add RC6 residency counters Imre Deak
2014-04-14 17:24 ` [PATCH v2 04/25] drm/i915: fix the RC6 status debug print Imre Deak
2014-04-14 17:24 ` [PATCH v2 05/25] drm/i915: remove the i915_dpio debugfs entry Imre Deak
2014-04-14 17:24 ` [PATCH v2 06/25] drm/i915: get a runtime PM ref for debugfs entries where needed Imre Deak
2014-04-14 17:24 ` [PATCH v2 07/25] drm/i915: move getting struct_mutex lower in the callstack during GPU reset Imre Deak
2014-04-14 17:24 ` [PATCH v2 08/25] drm/i915: get a runtime PM ref for the deferred GT powersave enabling Imre Deak
2014-04-25 7:59 ` Daniel Vetter
2014-04-25 8:14 ` Imre Deak
2014-04-25 9:09 ` Daniel Vetter
2014-04-25 8:01 ` Daniel Vetter
2014-04-14 17:24 ` [PATCH v2 09/25] drm/i915: get a runtime PM ref for the deferred GPU reset work Imre Deak
2014-04-16 12:11 ` Ville Syrjälä
2014-04-18 12:47 ` [PATCH v3] " Imre Deak
2014-04-22 19:38 ` Daniel Vetter
2014-04-22 20:34 ` Imre Deak
2014-04-22 21:05 ` Daniel Vetter
2014-04-22 22:13 ` [PATCH v4] " Imre Deak
2014-04-23 7:07 ` Daniel Vetter
2014-04-23 7:52 ` Imre Deak
2014-04-25 8:00 ` Daniel Vetter
2014-04-14 17:24 ` [PATCH v2 10/25] drm/i915: gen2: move error capture of IER to its correct place Imre Deak
2014-04-16 12:22 ` Ville Syrjälä
2014-04-16 12:57 ` Imre Deak
2014-04-24 21:06 ` Rodrigo Vivi
2014-04-14 17:24 ` [PATCH v2 11/25] drm/i915: add missing error capturing of the PIPESTAT reg Imre Deak
2014-04-16 12:17 ` Ville Syrjälä
2014-04-18 11:44 ` Imre Deak
2014-04-18 12:55 ` [PATCH v3 " Imre Deak
2014-04-23 7:53 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 12/25] drm/i915: vlv: check port power domain instead of only D0 for eDP VDD on Imre Deak
2014-04-14 17:24 ` [PATCH v2 13/25] drm/i915: fix unbalanced GT powersave enable / disable calls Imre Deak
2014-04-14 17:24 ` [PATCH v2 14/25] drm/i915: sanitize enable_rc6 option Imre Deak
2014-04-16 12:28 ` Ville Syrjälä
2014-04-16 12:37 ` Imre Deak
2014-04-18 13:01 ` [PATCH v3 " Imre Deak
2014-04-23 7:58 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 15/25] drm/i915: disable runtime PM if RC6 is disabled Imre Deak
2014-04-14 17:24 ` [PATCH v2 16/25] drm/i915: make runtime PM interrupt enable/disable platform independent Imre Deak
2014-04-14 17:24 ` [PATCH v2 17/25] drm/i915: factor out gen6_update_ring_freq Imre Deak
2014-04-16 17:31 ` Ville Syrjälä
2014-04-18 13:16 ` [PATCH v3 " Imre Deak
2014-04-23 7:59 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 18/25] drm/i915: make runtime PM swizzling/ring_freq init platform independent Imre Deak
2014-04-14 17:24 ` [PATCH v2 19/25] drm/i915: reinit GT power save during resume Imre Deak
2014-04-16 17:46 ` Ville Syrjälä
2014-04-18 10:51 ` Imre Deak
2014-04-22 17:21 ` [PATCH v3 " Imre Deak
2014-04-23 8:06 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 20/25] drm/i915: vlv: setup RPS min/max frequencies once during init time Imre Deak
2014-04-14 17:24 ` Imre Deak [this message]
2014-04-16 17:49 ` [PATCH v2 21/25] drm/i915: vlv: factor out vlv_force_gfx_clock Ville Syrjälä
2014-04-18 13:35 ` [PATCH v3 21/25] drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-off Imre Deak
2014-04-23 8:11 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 22/25] drm/i915: vlv: increase timeout when forcing on the GFX clock Imre Deak
2014-04-25 14:04 ` Daniel Vetter
2014-04-14 17:24 ` [PATCH v2 23/25] drm/i915: add various missing GTI/Gunit register definitions Imre Deak
2014-04-24 21:17 ` Rodrigo Vivi
2014-04-24 21:49 ` Imre Deak
2014-04-30 14:32 ` Ville Syrjälä
2014-05-05 11:43 ` Imre Deak
2014-05-05 12:13 ` [PATCH v3 " Imre Deak
2014-05-05 12:21 ` Ville Syrjälä
2014-04-14 17:24 ` [PATCH v2 24/25] drm/i915: propagate the error code from runtime PM callbacks Imre Deak
2014-04-15 13:39 ` [PATCH v3 " Imre Deak
2014-04-30 18:05 ` Ville Syrjälä
2014-04-30 18:53 ` Imre Deak
2014-05-05 12:44 ` Ville Syrjälä
2014-05-05 13:18 ` Imre Deak
2014-04-14 17:24 ` [PATCH v2 25/25] drm/i915: vlv: add runtime PM support Imre Deak
2014-04-16 12:39 ` Ville Syrjälä
2014-04-16 14:53 ` Daniel Vetter
2014-04-16 16:01 ` Imre Deak
2014-04-22 17:28 ` [PATCH v3 " Imre Deak
2014-04-22 22:09 ` [PATCH v4] drm/i915: get a runtime PM ref for the deferred GPU reset work Imre Deak
2014-04-24 21:02 ` Rodrigo Vivi
2014-04-30 17:35 ` [PATCH v3 25/25] drm/i915: vlv: add runtime PM support Ville Syrjälä
2014-05-05 9:33 ` Daniel Vetter
2014-05-05 12:19 ` [PATCH v4 " Imre Deak
2014-04-14 17:41 ` [PATCH v2 26/25] drm/i915: vlv: enable runtime PM Imre Deak
2014-05-06 19:39 ` Daniel Vetter
2014-04-17 11:00 ` [PATCH v2 00/25] vlv: add support for RPM Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397496286-29649-22-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox