From: deepak.s@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 1/7] drm/i915/chv: Enable Render Standby (RC6) for Cherryview
Date: Fri, 23 May 2014 21:00:15 +0530 [thread overview]
Message-ID: <1400859021-32202-2-git-send-email-deepak.s@linux.intel.com> (raw)
In-Reply-To: <1400859021-32202-1-git-send-email-deepak.s@linux.intel.com>
From: Deepak S <deepak.s@linux.intel.com>
v2: Configure PCBR if BIOS fails allocate pcbr (deepak)
v3: Fix PCBR condition check during CHV RC6 Enable flag set
v4: Fixup PCBR comment msg. (Chris)
Rebase against latest code (Deak)
Fixup Spurious hunk (Ben)
v5: Fix PCBR and commentis msg (mika)
v6: Rebase patch on latest nightly (Deepak)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 2 +
drivers/gpu/drm/i915/intel_pm.c | 115 +++++++++++++++++++++++++++++++++++++---
2 files changed, 111 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5122254..c1f36a5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1167,6 +1167,8 @@ enum punit_power_well {
#define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
#define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
#define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120)
+#define VLV_PCBR_ADDR_SHIFT 12
+
#define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */
#define EIR 0x020b0
#define EMR 0x020b4
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 906d06f..1816c52 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3341,6 +3341,13 @@ static void gen6_disable_rps(struct drm_device *dev)
gen6_disable_rps_interrupts(dev);
}
+static void cherryview_disable_rps(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ I915_WRITE(GEN6_RC_CONTROL, 0);
+}
+
static void valleyview_disable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3763,6 +3770,35 @@ static void valleyview_check_pctx(struct drm_i915_private *dev_priv)
dev_priv->vlv_pctx->stolen->start);
}
+
+/* Check that the pcbr address is not empty. */
+static void cherryview_check_pctx(struct drm_i915_private *dev_priv)
+{
+ unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
+
+ WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0);
+}
+
+static void cherryview_setup_pctx(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long pctx_paddr, paddr;
+ struct i915_gtt *gtt = &dev_priv->gtt;
+ u32 pcbr;
+ int pctx_size = 32*1024;
+
+ WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+ pcbr = I915_READ(VLV_PCBR);
+ if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
+ paddr = (dev_priv->mm.stolen_base +
+ (gtt->stolen_size - pctx_size));
+
+ pctx_paddr = (paddr & (~4095));
+ I915_WRITE(VLV_PCBR, pctx_paddr);
+ }
+}
+
static void valleyview_setup_pctx(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3852,11 +3888,70 @@ static void valleyview_init_gt_powersave(struct drm_device *dev)
mutex_unlock(&dev_priv->rps.hw_lock);
}
+static void cherryview_init_gt_powersave(struct drm_device *dev)
+{
+ cherryview_setup_pctx(dev);
+}
+
static void valleyview_cleanup_gt_powersave(struct drm_device *dev)
{
valleyview_cleanup_pctx(dev);
}
+static void cherryview_enable_rps(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_engine_cs *ring;
+ u32 gtfifodbg, rc6_mode = 0, pcbr;
+ int i;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+ gtfifodbg = I915_READ(GTFIFODBG);
+ if (gtfifodbg) {
+ DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
+ gtfifodbg);
+ I915_WRITE(GTFIFODBG, gtfifodbg);
+ }
+
+ cherryview_check_pctx(dev_priv);
+
+ /* 1a & 1b: Get forcewake during program sequence. Although the driver
+ * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
+ gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
+
+ /* 2a: Program RC6 thresholds.*/
+ I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
+ I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
+ I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
+
+ for_each_ring(ring, dev_priv, i)
+ I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
+ I915_WRITE(GEN6_RC_SLEEP, 0);
+
+ I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
+
+ /* allows RC6 residency counter to work */
+ I915_WRITE(VLV_COUNTER_CONTROL,
+ _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
+ VLV_MEDIA_RC6_COUNT_EN |
+ VLV_RENDER_RC6_COUNT_EN));
+
+ /* For now we assume BIOS is allocating and populating the PCBR */
+ pcbr = I915_READ(VLV_PCBR);
+
+ DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
+
+ /* 3: Enable RC6 */
+ if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
+ (pcbr >> VLV_PCBR_ADDR_SHIFT))
+ rc6_mode = GEN6_RC_CTL_EI_MODE(1);
+
+ I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
+
+ gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
+}
+
static void valleyview_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4665,13 +4760,17 @@ void intel_init_gt_powersave(struct drm_device *dev)
{
i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6);
- if (IS_VALLEYVIEW(dev))
+ if (IS_CHERRYVIEW(dev))
+ cherryview_init_gt_powersave(dev);
+ else if (IS_VALLEYVIEW(dev))
valleyview_init_gt_powersave(dev);
}
void intel_cleanup_gt_powersave(struct drm_device *dev)
{
- if (IS_VALLEYVIEW(dev))
+ if (IS_CHERRYVIEW(dev))
+ return;
+ else if (IS_VALLEYVIEW(dev))
valleyview_cleanup_gt_powersave(dev);
}
@@ -4685,13 +4784,15 @@ void intel_disable_gt_powersave(struct drm_device *dev)
if (IS_IRONLAKE_M(dev)) {
ironlake_disable_drps(dev);
ironlake_disable_rc6(dev);
- } else if (IS_GEN6(dev) || IS_GEN7(dev) || IS_BROADWELL(dev)) {
+ } else if (INTEL_INFO(dev)->gen >= 6) {
if (cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work))
intel_runtime_pm_put(dev_priv);
cancel_work_sync(&dev_priv->rps.work);
mutex_lock(&dev_priv->rps.hw_lock);
- if (IS_VALLEYVIEW(dev))
+ if (IS_CHERRYVIEW(dev))
+ cherryview_disable_rps(dev);
+ else if (IS_VALLEYVIEW(dev))
valleyview_disable_rps(dev);
else
gen6_disable_rps(dev);
@@ -4709,7 +4810,9 @@ static void intel_gen6_powersave_work(struct work_struct *work)
mutex_lock(&dev_priv->rps.hw_lock);
- if (IS_VALLEYVIEW(dev)) {
+ if (IS_CHERRYVIEW(dev)) {
+ cherryview_enable_rps(dev);
+ } else if (IS_VALLEYVIEW(dev)) {
valleyview_enable_rps(dev);
} else if (IS_BROADWELL(dev)) {
gen8_enable_rps(dev);
@@ -4734,7 +4837,7 @@ void intel_enable_gt_powersave(struct drm_device *dev)
ironlake_enable_rc6(dev);
intel_init_emon(dev);
mutex_unlock(&dev->struct_mutex);
- } else if (IS_GEN6(dev) || IS_GEN7(dev) || IS_BROADWELL(dev)) {
+ } else if (INTEL_INFO(dev)->gen >= 6) {
/*
* PCU communication is slow and this doesn't need to be
* done at any specific time, so do this out of our fast path
--
1.9.1
next prev parent reply other threads:[~2014-05-23 15:30 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 15:30 [PATCH 0/7] Enable RC6/Turbo on CHV deepak.s
2014-05-23 15:30 ` deepak.s [this message]
2014-05-23 15:30 ` [PATCH 2/7] drm/i915/chv: Added CHV specific register read and write and Streamline CHV forcewake stuff deepak.s
2014-05-26 8:07 ` Daniel Vetter
2014-05-23 15:30 ` [PATCH 3/7] drm/i915/chv: Enable RPS (Turbo) for Cherryview deepak.s
2014-05-26 13:30 ` Mika Kuoppala
2014-05-26 13:54 ` Deepak S
2014-05-26 14:32 ` Ville Syrjälä
2014-05-27 3:29 ` Deepak S
2014-05-26 14:37 ` Mika Kuoppala
2014-05-27 3:29 ` Deepak S
2014-05-27 6:36 ` [PATCH v6] " deepak.s
2014-05-27 10:29 ` [PATCH v7] " deepak.s
2014-05-27 10:45 ` Mika Kuoppala
2014-05-27 11:44 ` Daniel Vetter
2014-05-23 15:30 ` [PATCH 4/7] drm/i915/chv: CHV doesn't need WaRsForcewakeWaitTC0 deepak.s
2014-05-23 15:30 ` [PATCH 5/7] drm/i915/chv: Skip gen6_gt_check_fifodbg() on CHV deepak.s
2014-05-23 15:30 ` [PATCH 6/7] drm/i915/chv: Added CHV specific DDR fetch into init_clock_gating deepak.s
2014-05-26 15:19 ` Mika Kuoppala
2014-05-27 11:42 ` Daniel Vetter
2014-05-27 11:59 ` Ville Syrjälä
2014-05-27 12:11 ` Deepak S
2014-05-27 12:13 ` Deepak S
2014-05-23 15:30 ` [PATCH 7/7] drm/i915/chv: Freq(opcode) request for CHV deepak.s
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400859021-32202-2-git-send-email-deepak.s@linux.intel.com \
--to=deepak.s@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox