From: Shobhit Kumar <shobhit.kumar@intel.com>
To: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Subject: [v3] drm/i915: Detect if MIPI panel based on VBT and initialize only if present
Date: Tue, 27 May 2014 19:33:59 +0530 [thread overview]
Message-ID: <1401199439-22703-1-git-send-email-shobhit.kumar@intel.com> (raw)
In-Reply-To: <1401195382-21718-1-git-send-email-shobhit.kumar@intel.com>
It seems by default the VBT has MIPI configuration block as well. The
Generic driver will assume always MIPI if MIPI configuration block is found.
This is causing probelm when actually there is eDP. Fix this by looking
into general definition block which will have device configurations. From here
we can figure out what is the LFP type and initialize MIPI only if MIPI
is found.
v2: Addressed review comments by Damien
- Moved PORT definitions to intel_bios.h and renamed as DVO_PORT_MIPIA
- renamed is_mipi to has_mipi and moved definition as suggested
- Check has_mipi inside parse_mipi and intel_dsi_init insted of outside
v3: Make has_mipi as a bitfield as suggested
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 2 ++
drivers/gpu/drm/i915/intel_bios.c | 14 ++++++++++++++
drivers/gpu/drm/i915/intel_bios.h | 4 ++++
drivers/gpu/drm/i915/intel_dsi.c | 4 ++++
4 files changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9ef6712..ef7ab0a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1208,6 +1208,7 @@ struct intel_vbt_data {
unsigned int lvds_use_ssc:1;
unsigned int display_clock_mode:1;
unsigned int fdi_rx_polarity_inverted:1;
+ unsigned int has_mipi:1;
int lvds_ssc_freq;
unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
@@ -1231,6 +1232,7 @@ struct intel_vbt_data {
/* MIPI DSI */
struct {
+ u16 port;
u16 panel_id;
struct mipi_config *config;
struct mipi_pps_data *pps;
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 6b65096..6f6b6c6 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -744,6 +744,10 @@ parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
int i, panel_id, seq_size;
u16 block_size;
+ /* parse MIPI blocks only if LFP type is MIPI */
+ if (!dev_priv->vbt.has_mipi)
+ return;
+
/* Initialize this to undefined indicating no generic MIPI support */
dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
@@ -1059,6 +1063,16 @@ parse_device_mapping(struct drm_i915_private *dev_priv,
/* skip the device block if device type is invalid */
continue;
}
+
+ if (p_child->common.dvo_port >= DVO_PORT_MIPIA && p_child->common.dvo_port <= DVO_PORT_MIPID) {
+ /* check the device type and confirm its MIPI */
+ if (p_child->common.device_type & DEVICE_TYPE_MIPI_OUTPUT) {
+ DRM_DEBUG_KMS("Found MIPI as LFP\n");
+ dev_priv->vbt.has_mipi = 1;
+ dev_priv->vbt.dsi.port = p_child->common.dvo_port;
+ }
+ }
+
child_dev_ptr = dev_priv->vbt.child_dev + count;
count++;
memcpy((void *)child_dev_ptr, (void *)p_child,
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 6009deb..b986677 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -743,6 +743,10 @@ int intel_parse_bios(struct drm_device *dev);
#define DVO_PORT_DPC 8
#define DVO_PORT_DPD 9
#define DVO_PORT_DPA 10
+#define DVO_PORT_MIPIA 21
+#define DVO_PORT_MIPIB 22
+#define DVO_PORT_MIPIC 23
+#define DVO_PORT_MIPID 24
/* Block 52 contains MIPI Panel info
* 6 such enteries will there. Index into correct
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index e73bec6..944a421 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -660,6 +660,10 @@ bool intel_dsi_init(struct drm_device *dev)
DRM_DEBUG_KMS("\n");
+ /* There is no detection method for MIPI so rely on VBT */
+ if (!dev_priv->vbt.has_mipi)
+ return false;
+
intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
if (!intel_dsi)
return false;
--
1.8.3.2
next prev parent reply other threads:[~2014-05-27 14:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 16:09 [PATCH] drm/i915: Detect if MIPI panel based on VBT and initialize only if present Shobhit Kumar
2014-05-27 11:32 ` Damien Lespiau
2014-05-27 12:10 ` Kumar, Shobhit
2014-05-27 12:27 ` Damien Lespiau
2014-05-27 11:40 ` Daniel Vetter
2014-05-27 11:43 ` Kumar, Shobhit
2014-05-27 12:56 ` [v2] " Shobhit Kumar
2014-05-27 13:18 ` Damien Lespiau
2014-05-27 14:03 ` Shobhit Kumar [this message]
2014-05-27 14:17 ` [v3] " Damien Lespiau
2014-05-27 14:31 ` Ville Syrjälä
2014-05-27 14:35 ` Damien Lespiau
2014-05-27 17:05 ` Daniel Vetter
2014-05-27 14:31 ` Kumar, Shobhit
2014-05-27 17:10 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401199439-22703-1-git-send-email-shobhit.kumar@intel.com \
--to=shobhit.kumar@intel.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox