From: deepak.s@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 1/3] drm/i915: CHV GPU frequency to opcode functions
Date: Sat, 12 Jul 2014 14:54:33 +0530 [thread overview]
Message-ID: <1405157073-15248-1-git-send-email-deepak.s@linux.intel.com> (raw)
In-Reply-To: <1404978387-28180-1-git-send-email-deepak.s@linux.intel.com>
From: Deepak S <deepak.s@linux.intel.com>
Adding chv specific fre/encode conversion.
v2: Remove generic function and platform check (Daniel)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 78 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 6892421..f673e1b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6931,7 +6931,7 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
return 0;
}
-int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
+int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
int div;
@@ -6953,7 +6953,7 @@ int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
return DIV_ROUND_CLOSEST(dev_priv->mem_freq * (val + 6 - 0xbd), 4 * div);
}
-int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
+int byt_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
int mul;
@@ -6975,6 +6975,80 @@ int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
return DIV_ROUND_CLOSEST(4 * mul * val, dev_priv->mem_freq) + 0xbd - 6;
}
+int chv_gpu_freq(struct drm_i915_private *dev_priv, int val)
+{
+ int div, freq;
+
+ switch (dev_priv->rps.cz_freq) {
+ case 200:
+ div = 5;
+ break;
+ case 267:
+ div = 6;
+ break;
+ case 320:
+ case 333:
+ case 400:
+ div = 8;
+ break;
+ default:
+ return -1;
+ }
+
+ freq = (DIV_ROUND_CLOSEST((dev_priv->rps.cz_freq * val), 2 * div) / 2);
+
+ return freq;
+}
+
+int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
+{
+ int mul, opcode;
+
+ switch (dev_priv->rps.cz_freq) {
+ case 200:
+ mul = 5;
+ break;
+ case 267:
+ mul = 6;
+ break;
+ case 320:
+ case 333:
+ case 400:
+ mul = 8;
+ break;
+ default:
+ return -1;
+ }
+
+ opcode = (DIV_ROUND_CLOSEST((val * 2 * mul), dev_priv->rps.cz_freq) * 2);
+
+ return opcode;
+}
+
+int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
+{
+ int ret = -1;
+
+ if (IS_CHERRYVIEW(dev_priv->dev))
+ ret = chv_gpu_freq(dev_priv, val);
+ else if (IS_VALLEYVIEW(dev_priv->dev))
+ ret = byt_gpu_freq(dev_priv, val);
+
+ return ret;
+}
+
+int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
+{
+ int ret = -1;
+
+ if (IS_CHERRYVIEW(dev_priv->dev))
+ ret = chv_freq_opcode(dev_priv, val);
+ else if (IS_VALLEYVIEW(dev_priv->dev))
+ ret = byt_freq_opcode(dev_priv, val);
+
+ return ret;
+}
+
void intel_pm_setup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
--
1.9.1
next prev parent reply other threads:[~2014-07-11 9:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 7:46 [PATCH 0/7] Enable RP1/RPn/RP0 sysfs and enable CHV PM interrupt deepak.s
2014-07-10 7:46 ` [PATCH 1/7] drm/i915: Read guaranteed freq for valleyview deepak.s
2014-07-11 14:42 ` Mika Kuoppala
2014-07-11 15:56 ` Daniel Vetter
2014-07-10 7:46 ` [PATCH 2/7] drm/i915: Add RP0/RP1/RPn render P state thresholds in VLV sysfs deepak.s
2014-07-11 14:44 ` Mika Kuoppala
2014-07-11 16:00 ` Daniel Vetter
2014-07-10 7:46 ` [PATCH 3/7] drm/i915: keep freq/opcode conversion function more generic deepak.s
2014-07-09 12:03 ` Daniel Vetter
2014-07-11 4:26 ` Deepak S
2014-07-10 6:28 ` Daniel Vetter
2014-07-11 6:50 ` Deepak S
2014-07-10 7:46 ` [PATCH 4/7] drm/i915: populate mem_freq/cz_clock for chv deepak.s
2014-07-11 14:50 ` Mika Kuoppala
2014-07-10 7:46 ` [PATCH 5/7] drm/i915: CHV GPU frequency to opcode functions deepak.s
2014-07-10 7:46 ` [PATCH 6/7] drm/i915/chv: Add basic PM interrupt support for CHV deepak.s
2014-07-11 15:03 ` Mika Kuoppala
2014-07-10 7:46 ` [PATCH 7/7] drm/i915: Add RP1 render P state thresholds in CHV deepak.s
2014-07-12 9:24 ` deepak.s [this message]
2014-07-11 15:53 ` [PATCH v2 1/3] drm/i915: CHV GPU frequency to opcode functions Mika Kuoppala
2014-07-11 15:58 ` Daniel Vetter
2014-07-12 13:16 ` [PATCH v2] drm/i915: Add RP1 render P state thresholds in CHV deepak.s
2014-07-11 16:07 ` Mika Kuoppala
2014-07-11 16:22 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405157073-15248-1-git-send-email-deepak.s@linux.intel.com \
--to=deepak.s@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox