From: Thomas Daniel <thomas.daniel@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 39/43] drm/i915/bdw: Print context state in debugfs
Date: Thu, 24 Jul 2014 17:04:47 +0100 [thread overview]
Message-ID: <1406217891-8912-40-git-send-email-thomas.daniel@intel.com> (raw)
In-Reply-To: <1406217891-8912-1-git-send-email-thomas.daniel@intel.com>
From: Ben Widawsky <ben@bwidawsk.net>
This has turned out to be really handy in debug so far.
Update:
Since writing this patch, I've gotten similar code upstream for error
state. I've used it quite a bit in debugfs however, and I'd like to keep
it here at least until preemption is working.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
This patch was accidentally dropped in the first Execlists version, and
it has been very useful indeed. Put it back again, but as a standalone
debugfs file.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 52 +++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 0980cdd..968c3c0 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1695,6 +1695,57 @@ static int i915_context_status(struct seq_file *m, void *unused)
return 0;
}
+static int i915_dump_lrc(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_engine_cs *ring;
+ struct intel_context *ctx;
+ int ret, i;
+
+ if (!i915.enable_execlists) {
+ seq_printf(m, "Logical Ring Contexts are disabled\n");
+ return 0;
+ }
+
+ ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+ if (ret)
+ return ret;
+
+ list_for_each_entry(ctx, &dev_priv->context_list, link) {
+ for_each_ring(ring, dev_priv, i) {
+ struct drm_i915_gem_object *ctx_obj = ctx->engine[i].state;
+
+ if (ring->default_context == ctx)
+ continue;
+
+ if (ctx_obj) {
+ struct page *page = i915_gem_object_get_page(ctx_obj, 1);
+ uint32_t *reg_state = kmap_atomic(page);
+ int j;
+
+ seq_printf(m, "CONTEXT: %s %u\n", ring->name,
+ intel_execlists_ctx_id(ctx_obj));
+
+ for (j = 0; j < 0x600 / sizeof(u32) / 4; j += 4) {
+ seq_printf(m, "\t[0x%08lx] 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ i915_gem_obj_ggtt_offset(ctx_obj) + 4096 + (j * 4),
+ reg_state[j], reg_state[j + 1],
+ reg_state[j + 2], reg_state[j + 3]);
+ }
+ kunmap_atomic(reg_state);
+
+ seq_putc(m, '\n');
+ }
+ }
+ }
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return 0;
+}
+
static int i915_execlists(struct seq_file *m, void *data)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
@@ -3992,6 +4043,7 @@ static const struct drm_info_list i915_debugfs_list[] = {
{"i915_opregion", i915_opregion, 0},
{"i915_gem_framebuffer", i915_gem_framebuffer_info, 0},
{"i915_context_status", i915_context_status, 0},
+ {"i915_dump_lrc", i915_dump_lrc, 0},
{"i915_execlists", i915_execlists, 0},
{"i915_gen6_forcewake_count", i915_gen6_forcewake_count_info, 0},
{"i915_swizzle_info", i915_swizzle_info, 0},
--
1.7.9.5
next prev parent reply other threads:[~2014-07-24 16:05 UTC|newest]
Thread overview: 137+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 16:04 [PATCH 00/43] Execlists v5 Thomas Daniel
2014-07-24 16:04 ` [PATCH 01/43] drm/i915: Reorder the actual workload submission so that args checking is done earlier Thomas Daniel
2014-07-25 8:30 ` Daniel Vetter
2014-07-25 9:16 ` Chris Wilson
2014-07-24 16:04 ` [PATCH 02/43] drm/i915/bdw: New source and header file for LRs, LRCs and Execlists Thomas Daniel
2014-07-24 16:04 ` [PATCH 03/43] drm/i915/bdw: Macro for LRCs and module option for Execlists Thomas Daniel
2014-08-11 13:57 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 04/43] drm/i915/bdw: Initialization for Logical Ring Contexts Thomas Daniel
2014-08-11 14:03 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 05/43] drm/i915/bdw: Introduce one context backing object per engine Thomas Daniel
2014-08-11 13:59 ` [PATCH] drm/i915: WARN if module opt sanitization goes out of order Daniel Vetter
2014-08-11 14:28 ` Damien Lespiau
2014-07-24 16:04 ` [PATCH 06/43] drm/i915/bdw: A bit more advanced LR context alloc/free Thomas Daniel
2014-07-24 16:04 ` [PATCH 07/43] drm/i915/bdw: Allocate ringbuffers for Logical Ring Contexts Thomas Daniel
2014-07-24 16:04 ` [PATCH 08/43] drm/i915/bdw: Add a context and an engine pointers to the ringbuffer Thomas Daniel
2014-08-11 14:14 ` Daniel Vetter
2014-08-11 14:20 ` Daniel Vetter
2014-08-13 13:34 ` Daniel, Thomas
2014-08-13 15:16 ` Daniel Vetter
2014-08-14 15:09 ` Daniel, Thomas
2014-08-14 15:32 ` Daniel Vetter
2014-08-14 15:37 ` Daniel Vetter
2014-08-14 15:56 ` Daniel, Thomas
2014-08-14 16:19 ` Daniel Vetter
2014-08-14 16:27 ` [PATCH] drm/i915: Add temporary ring->ctx backpointer Daniel Vetter
2014-08-14 16:33 ` Daniel, Thomas
2014-07-24 16:04 ` [PATCH 09/43] drm/i915/bdw: Populate LR contexts (somewhat) Thomas Daniel
2014-07-24 16:04 ` [PATCH 10/43] drm/i915/bdw: Deferred creation of user-created LRCs Thomas Daniel
2014-08-11 14:25 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 11/43] drm/i915/bdw: Render moot context reset and switch with Execlists Thomas Daniel
2014-08-11 14:30 ` Daniel Vetter
2014-08-15 10:22 ` Daniel, Thomas
2014-08-15 15:39 ` Daniel Vetter
2014-08-20 15:29 ` [PATCH] " Thomas Daniel
2014-08-20 15:36 ` Chris Wilson
2014-08-25 20:39 ` Daniel Vetter
2014-08-25 22:01 ` Scot Doyle
2014-08-26 5:59 ` Chris Wilson
2014-08-26 13:54 ` Siluvery, Arun
2014-08-26 14:11 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 12/43] drm/i915/bdw: Don't write PDP in the legacy way when using LRCs Thomas Daniel
2014-08-01 13:46 ` Damien Lespiau
2014-08-07 12:17 ` Thomas Daniel
2014-08-08 15:59 ` Damien Lespiau
2014-08-11 14:32 ` Daniel Vetter
2014-08-15 11:01 ` [PATCH] " Thomas Daniel
2014-07-24 16:04 ` [PATCH 13/43] drm/i915: Abstract the legacy workload submission mechanism away Thomas Daniel
2014-08-11 14:36 ` Daniel Vetter
2014-08-11 14:39 ` Daniel Vetter
2014-08-11 14:39 ` Daniel Vetter
2014-08-11 15:02 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 14/43] drm/i915/bdw: Skeleton for the new logical rings submission path Thomas Daniel
2014-07-24 16:04 ` [PATCH 15/43] drm/i915/bdw: Generic logical ring init and cleanup Thomas Daniel
2014-08-11 15:01 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 16/43] drm/i915/bdw: GEN-specific logical ring init Thomas Daniel
2014-08-11 15:04 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 17/43] drm/i915/bdw: GEN-specific logical ring set/get seqno Thomas Daniel
2014-08-11 15:05 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 18/43] drm/i915/bdw: New logical ring submission mechanism Thomas Daniel
2014-08-11 20:40 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 19/43] drm/i915/bdw: GEN-specific logical ring emit request Thomas Daniel
2014-07-24 16:04 ` [PATCH 20/43] drm/i915/bdw: GEN-specific logical ring emit flush Thomas Daniel
2014-07-24 16:04 ` [PATCH 21/43] drm/i915/bdw: Emission of requests with logical rings Thomas Daniel
2014-08-11 20:56 ` Daniel Vetter
2014-08-13 13:34 ` Daniel, Thomas
2014-08-13 15:25 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 22/43] drm/i915/bdw: Ring idle and stop " Thomas Daniel
2014-07-24 16:04 ` [PATCH 23/43] drm/i915/bdw: Interrupts " Thomas Daniel
2014-08-11 21:02 ` Daniel Vetter
2014-08-11 21:08 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 24/43] drm/i915/bdw: GEN-specific logical ring emit batchbuffer start Thomas Daniel
2014-08-11 21:09 ` Daniel Vetter
2014-08-11 21:12 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 25/43] drm/i915/bdw: Workload submission mechanism for Execlists Thomas Daniel
2014-08-11 20:30 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 26/43] drm/i915/bdw: Always use MMIO flips with Execlists Thomas Daniel
2014-08-11 20:34 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 27/43] drm/i915/bdw: Render state init for Execlists Thomas Daniel
2014-08-11 21:25 ` Daniel Vetter
2014-08-13 15:07 ` Daniel, Thomas
2014-08-13 15:30 ` Daniel Vetter
2014-08-14 20:00 ` Daniel Vetter
2014-08-15 8:43 ` Daniel, Thomas
2014-08-20 15:55 ` Daniel, Thomas
2014-08-25 20:55 ` Daniel Vetter
2014-08-21 10:40 ` [PATCH] " Thomas Daniel
2014-08-28 9:40 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 28/43] drm/i915/bdw: Implement context switching (somewhat) Thomas Daniel
2014-08-11 21:29 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 29/43] drm/i915/bdw: Write the tail pointer, LRC style Thomas Daniel
2014-08-01 14:33 ` Damien Lespiau
2014-08-11 21:30 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 30/43] drm/i915/bdw: Two-stage execlist submit process Thomas Daniel
2014-08-14 20:05 ` Daniel Vetter
2014-08-14 20:10 ` Daniel Vetter
2014-08-15 8:51 ` Daniel, Thomas
2014-08-15 9:38 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 31/43] drm/i915/bdw: Handle context switch events Thomas Daniel
2014-08-14 20:13 ` Daniel Vetter
2014-08-14 20:17 ` Daniel Vetter
2014-08-14 20:28 ` Daniel Vetter
2014-08-14 20:37 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 32/43] drm/i915/bdw: Avoid non-lite-restore preemptions Thomas Daniel
2014-08-14 20:31 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 33/43] drm/i915/bdw: Help out the ctx switch interrupt handler Thomas Daniel
2014-08-14 20:43 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 34/43] drm/i915/bdw: Make sure gpu reset still works with Execlists Thomas Daniel
2014-08-01 14:42 ` Damien Lespiau
2014-08-06 9:26 ` Daniel, Thomas
2014-08-01 14:46 ` Damien Lespiau
2014-08-06 9:28 ` Daniel, Thomas
2014-07-24 16:04 ` [PATCH 35/43] drm/i915/bdw: Make sure error capture keeps working " Thomas Daniel
2014-08-15 12:14 ` Daniel Vetter
2014-08-21 10:57 ` Daniel, Thomas
2014-08-25 21:00 ` Daniel Vetter
2014-08-25 21:29 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 36/43] drm/i915/bdw: Disable semaphores for Execlists Thomas Daniel
2014-07-24 16:04 ` [PATCH 37/43] drm/i915/bdw: Display execlists info in debugfs Thomas Daniel
2014-08-01 14:54 ` Damien Lespiau
2014-08-07 12:23 ` Thomas Daniel
2014-08-08 16:02 ` Damien Lespiau
2014-07-24 16:04 ` [PATCH 38/43] drm/i915/bdw: Display context backing obj & ringbuffer " Thomas Daniel
2014-07-24 16:04 ` Thomas Daniel [this message]
2014-08-01 15:54 ` [PATCH 39/43] drm/i915/bdw: Print context state " Damien Lespiau
2014-08-07 12:24 ` Thomas Daniel
2014-08-08 15:57 ` Damien Lespiau
2014-07-24 16:04 ` [PATCH 40/43] drm/i915/bdw: Document Logical Rings, LR contexts and Execlists Thomas Daniel
2014-08-15 12:42 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 41/43] drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists) Thomas Daniel
2014-08-18 8:33 ` Jani Nikula
2014-08-18 14:52 ` Daniel, Thomas
2014-07-24 16:04 ` [PATCH 42/43] drm/i915/bdw: Pin the context backing objects to GGTT on-demand Thomas Daniel
2014-08-15 13:03 ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 43/43] drm/i915/bdw: Pin the ringbuffer backing object " Thomas Daniel
2014-07-25 8:35 ` [PATCH 00/43] Execlists v5 Daniel Vetter
2014-08-01 16:09 ` Damien Lespiau
2014-08-01 16:29 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406217891-8912-40-git-send-email-thomas.daniel@intel.com \
--to=thomas.daniel@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox