From: Imre Deak <imre.deak@intel.com>
To: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>,
Daniel Vetter <daniel.vetter@intel.com>,
intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 2/3] drm/i915: wait for all DSI FIFOs to be empty
Date: Tue, 29 Jul 2014 15:30:25 +0300 [thread overview]
Message-ID: <1406637025.9702.42.camel@intelbox> (raw)
In-Reply-To: <1405165643-13189-3-git-send-email-shobhit.kumar@intel.com>
[-- Attachment #1.1: Type: text/plain, Size: 3812 bytes --]
On Sat, 2014-07-12 at 17:17 +0530, Shobhit Kumar wrote:
> Ensure that the DSI packets for a particular sequence are completely
> sent before going ahead in the enabling or disabling of the panel
>
> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dsi.c | 8 ++++++++
> drivers/gpu/drm/i915/intel_dsi_cmd.c | 16 ++++++++++++++++
> drivers/gpu/drm/i915/intel_dsi_cmd.h | 1 +
> 3 files changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 61da0e5..98c78ab 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -152,6 +152,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
> if (intel_dsi->dev.dev_ops->enable)
> intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
>
> + wait_for_dsi_fifo_empty(intel_dsi);
> +
> /* assert ip_tg_enable signal */
> temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK;
> temp = temp | intel_dsi->port_bits;
> @@ -192,6 +194,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
> if (intel_dsi->dev.dev_ops->send_otp_cmds)
> intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
>
> + wait_for_dsi_fifo_empty(intel_dsi);
> +
> /* Enable port in pre-enable phase itself because as per hw team
> * recommendation, port should be enabled befor plane & pipe */
> intel_dsi_enable(encoder);
> @@ -232,6 +236,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
> DRM_DEBUG_KMS("\n");
>
> if (is_vid_mode(intel_dsi)) {
> + wait_for_dsi_fifo_empty(intel_dsi);
> +
> /* de-assert ip_tg_enable signal */
> temp = I915_READ(MIPI_PORT_CTRL(pipe));
> I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
> @@ -261,6 +267,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
> * some next enable sequence send turn on packet error is observed */
> if (intel_dsi->dev.dev_ops->disable)
> intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
> +
> + wait_for_dsi_fifo_empty(intel_dsi);
> }
>
> static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.c b/drivers/gpu/drm/i915/intel_dsi_cmd.c
> index 933c863..7f1430a 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_cmd.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.c
> @@ -419,3 +419,19 @@ int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs)
>
> return 0;
> }
> +
> +void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi)
> +{
> + struct drm_encoder *encoder = &intel_dsi->base.base;
> + struct drm_device *dev = encoder->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> + enum pipe pipe = intel_crtc->pipe;
> + u32 mask;
> +
> + mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
> + LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
> +
> + if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == mask, 100))
> + DRM_ERROR("DPI FIFOs are not empty\n");
> +}
> diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.h b/drivers/gpu/drm/i915/intel_dsi_cmd.h
> index 9a18cbf..46aa1ac 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_cmd.h
> +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.h
> @@ -51,6 +51,7 @@ int dsi_vc_generic_read(struct intel_dsi *intel_dsi, int channel,
> u8 *reqdata, int reqlen, u8 *buf, int buflen);
>
> int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs);
> +void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi);
>
> /* XXX: questionable write helpers */
> static inline int dsi_vc_dcs_write_0(struct intel_dsi *intel_dsi,
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2014-07-29 12:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-12 11:47 [PATCH 0/3] Fixing last of few known issues in DSI and Burst mode Support Shobhit Kumar
2014-07-12 11:47 ` [PATCH 1/3] drm/i915: Add get_config implementation for DSI encoder Shobhit Kumar
2014-07-12 11:58 ` Daniel Vetter
2014-07-14 14:36 ` Kumar, Shobhit
2014-07-14 15:50 ` Daniel Vetter
2014-07-15 12:24 ` Kumar, Shobhit
2014-07-15 12:45 ` [v2] drm/i915: Add correct hw/sw config check " Shobhit Kumar
2014-07-29 12:22 ` Imre Deak
2014-07-30 15:02 ` [v3] " Shobhit Kumar
2014-07-30 16:24 ` Imre Deak
2014-07-29 11:38 ` [PATCH 1/3] drm/i915: Add get_config implementation " Imre Deak
2014-07-29 11:44 ` Daniel Vetter
2014-07-12 11:47 ` [PATCH 2/3] drm/i915: wait for all DSI FIFOs to be empty Shobhit Kumar
2014-07-29 12:30 ` Imre Deak [this message]
2014-07-12 11:47 ` [PATCH 3/3] drm/i915: Add support for Video Burst Mode for MIPI DSI Shobhit Kumar
2014-07-30 12:22 ` Imre Deak
2014-07-30 15:04 ` [v2] " Shobhit Kumar
2014-07-30 20:36 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406637025.9702.42.camel@intelbox \
--to=imre.deak@intel.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=shobhit.kumar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox