public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Thomas Daniel <thomas.daniel@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 39/43] drm/i915/bdw: Print context state in debugfs
Date: Thu,  7 Aug 2014 13:24:26 +0100	[thread overview]
Message-ID: <1407414266-6095-1-git-send-email-thomas.daniel@intel.com> (raw)
In-Reply-To: <1406217891-8912-40-git-send-email-thomas.daniel@intel.com>

From: Ben Widawsky <ben@bwidawsk.net>

This has turned out to be really handy in debug so far.

Update:
Since writing this patch, I've gotten similar code upstream for error
state. I've used it quite a bit in debugfs however, and I'd like to keep
it here at least until preemption is working.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>

This patch was accidentally dropped in the first Execlists version, and
it has been very useful indeed. Put it back again, but as a standalone
debugfs file.

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>

v2: Take the device struct_mutex rather than mode_config mutex for
atomic state capture.

Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c |   52 +++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index aca5ff1..a3c958c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1695,6 +1695,57 @@ static int i915_context_status(struct seq_file *m, void *unused)
 	return 0;
 }
 
+static int i915_dump_lrc(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_engine_cs *ring;
+	struct intel_context *ctx;
+	int ret, i;
+
+	if (!i915.enable_execlists) {
+		seq_printf(m, "Logical Ring Contexts are disabled\n");
+		return 0;
+	}
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	list_for_each_entry(ctx, &dev_priv->context_list, link) {
+		for_each_ring(ring, dev_priv, i) {
+			struct drm_i915_gem_object *ctx_obj = ctx->engine[i].state;
+
+			if (ring->default_context == ctx)
+				continue;
+
+			if (ctx_obj) {
+				struct page *page = i915_gem_object_get_page(ctx_obj, 1);
+				uint32_t *reg_state = kmap_atomic(page);
+				int j;
+
+				seq_printf(m, "CONTEXT: %s %u\n", ring->name,
+						intel_execlists_ctx_id(ctx_obj));
+
+				for (j = 0; j < 0x600 / sizeof(u32) / 4; j += 4) {
+					seq_printf(m, "\t[0x%08lx] 0x%08x 0x%08x 0x%08x 0x%08x\n",
+					i915_gem_obj_ggtt_offset(ctx_obj) + 4096 + (j * 4),
+					reg_state[j], reg_state[j + 1],
+					reg_state[j + 2], reg_state[j + 3]);
+				}
+				kunmap_atomic(reg_state);
+
+				seq_putc(m, '\n');
+			}
+		}
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
 static int i915_execlists(struct seq_file *m, void *data)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
@@ -3999,6 +4050,7 @@ static const struct drm_info_list i915_debugfs_list[] = {
 	{"i915_opregion", i915_opregion, 0},
 	{"i915_gem_framebuffer", i915_gem_framebuffer_info, 0},
 	{"i915_context_status", i915_context_status, 0},
+	{"i915_dump_lrc", i915_dump_lrc, 0},
 	{"i915_execlists", i915_execlists, 0},
 	{"i915_gen6_forcewake_count", i915_gen6_forcewake_count_info, 0},
 	{"i915_swizzle_info", i915_swizzle_info, 0},
-- 
1.7.9.5

  parent reply	other threads:[~2014-08-07 12:24 UTC|newest]

Thread overview: 137+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-24 16:04 [PATCH 00/43] Execlists v5 Thomas Daniel
2014-07-24 16:04 ` [PATCH 01/43] drm/i915: Reorder the actual workload submission so that args checking is done earlier Thomas Daniel
2014-07-25  8:30   ` Daniel Vetter
2014-07-25  9:16     ` Chris Wilson
2014-07-24 16:04 ` [PATCH 02/43] drm/i915/bdw: New source and header file for LRs, LRCs and Execlists Thomas Daniel
2014-07-24 16:04 ` [PATCH 03/43] drm/i915/bdw: Macro for LRCs and module option for Execlists Thomas Daniel
2014-08-11 13:57   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 04/43] drm/i915/bdw: Initialization for Logical Ring Contexts Thomas Daniel
2014-08-11 14:03   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 05/43] drm/i915/bdw: Introduce one context backing object per engine Thomas Daniel
2014-08-11 13:59   ` [PATCH] drm/i915: WARN if module opt sanitization goes out of order Daniel Vetter
2014-08-11 14:28     ` Damien Lespiau
2014-07-24 16:04 ` [PATCH 06/43] drm/i915/bdw: A bit more advanced LR context alloc/free Thomas Daniel
2014-07-24 16:04 ` [PATCH 07/43] drm/i915/bdw: Allocate ringbuffers for Logical Ring Contexts Thomas Daniel
2014-07-24 16:04 ` [PATCH 08/43] drm/i915/bdw: Add a context and an engine pointers to the ringbuffer Thomas Daniel
2014-08-11 14:14   ` Daniel Vetter
2014-08-11 14:20     ` Daniel Vetter
2014-08-13 13:34       ` Daniel, Thomas
2014-08-13 15:16         ` Daniel Vetter
2014-08-14 15:09           ` Daniel, Thomas
2014-08-14 15:32             ` Daniel Vetter
2014-08-14 15:37               ` Daniel Vetter
2014-08-14 15:56                 ` Daniel, Thomas
2014-08-14 16:19                   ` Daniel Vetter
2014-08-14 16:27                     ` [PATCH] drm/i915: Add temporary ring->ctx backpointer Daniel Vetter
2014-08-14 16:33                       ` Daniel, Thomas
2014-07-24 16:04 ` [PATCH 09/43] drm/i915/bdw: Populate LR contexts (somewhat) Thomas Daniel
2014-07-24 16:04 ` [PATCH 10/43] drm/i915/bdw: Deferred creation of user-created LRCs Thomas Daniel
2014-08-11 14:25   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 11/43] drm/i915/bdw: Render moot context reset and switch with Execlists Thomas Daniel
2014-08-11 14:30   ` Daniel Vetter
2014-08-15 10:22     ` Daniel, Thomas
2014-08-15 15:39       ` Daniel Vetter
2014-08-20 15:29   ` [PATCH] " Thomas Daniel
2014-08-20 15:36     ` Chris Wilson
2014-08-25 20:39       ` Daniel Vetter
2014-08-25 22:01         ` Scot Doyle
2014-08-26  5:59         ` Chris Wilson
2014-08-26 13:54           ` Siluvery, Arun
2014-08-26 14:11             ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 12/43] drm/i915/bdw: Don't write PDP in the legacy way when using LRCs Thomas Daniel
2014-08-01 13:46   ` Damien Lespiau
2014-08-07 12:17   ` Thomas Daniel
2014-08-08 15:59     ` Damien Lespiau
2014-08-11 14:32     ` Daniel Vetter
2014-08-15 11:01     ` [PATCH] " Thomas Daniel
2014-07-24 16:04 ` [PATCH 13/43] drm/i915: Abstract the legacy workload submission mechanism away Thomas Daniel
2014-08-11 14:36   ` Daniel Vetter
2014-08-11 14:39     ` Daniel Vetter
2014-08-11 14:39   ` Daniel Vetter
2014-08-11 15:02   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 14/43] drm/i915/bdw: Skeleton for the new logical rings submission path Thomas Daniel
2014-07-24 16:04 ` [PATCH 15/43] drm/i915/bdw: Generic logical ring init and cleanup Thomas Daniel
2014-08-11 15:01   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 16/43] drm/i915/bdw: GEN-specific logical ring init Thomas Daniel
2014-08-11 15:04   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 17/43] drm/i915/bdw: GEN-specific logical ring set/get seqno Thomas Daniel
2014-08-11 15:05   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 18/43] drm/i915/bdw: New logical ring submission mechanism Thomas Daniel
2014-08-11 20:40   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 19/43] drm/i915/bdw: GEN-specific logical ring emit request Thomas Daniel
2014-07-24 16:04 ` [PATCH 20/43] drm/i915/bdw: GEN-specific logical ring emit flush Thomas Daniel
2014-07-24 16:04 ` [PATCH 21/43] drm/i915/bdw: Emission of requests with logical rings Thomas Daniel
2014-08-11 20:56   ` Daniel Vetter
2014-08-13 13:34     ` Daniel, Thomas
2014-08-13 15:25       ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 22/43] drm/i915/bdw: Ring idle and stop " Thomas Daniel
2014-07-24 16:04 ` [PATCH 23/43] drm/i915/bdw: Interrupts " Thomas Daniel
2014-08-11 21:02   ` Daniel Vetter
2014-08-11 21:08   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 24/43] drm/i915/bdw: GEN-specific logical ring emit batchbuffer start Thomas Daniel
2014-08-11 21:09   ` Daniel Vetter
2014-08-11 21:12     ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 25/43] drm/i915/bdw: Workload submission mechanism for Execlists Thomas Daniel
2014-08-11 20:30   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 26/43] drm/i915/bdw: Always use MMIO flips with Execlists Thomas Daniel
2014-08-11 20:34   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 27/43] drm/i915/bdw: Render state init for Execlists Thomas Daniel
2014-08-11 21:25   ` Daniel Vetter
2014-08-13 15:07     ` Daniel, Thomas
2014-08-13 15:30       ` Daniel Vetter
2014-08-14 20:00         ` Daniel Vetter
2014-08-15  8:43           ` Daniel, Thomas
2014-08-20 15:55           ` Daniel, Thomas
2014-08-25 20:55             ` Daniel Vetter
2014-08-21 10:40   ` [PATCH] " Thomas Daniel
2014-08-28  9:40     ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 28/43] drm/i915/bdw: Implement context switching (somewhat) Thomas Daniel
2014-08-11 21:29   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 29/43] drm/i915/bdw: Write the tail pointer, LRC style Thomas Daniel
2014-08-01 14:33   ` Damien Lespiau
2014-08-11 21:30   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 30/43] drm/i915/bdw: Two-stage execlist submit process Thomas Daniel
2014-08-14 20:05   ` Daniel Vetter
2014-08-14 20:10   ` Daniel Vetter
2014-08-15  8:51     ` Daniel, Thomas
2014-08-15  9:38       ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 31/43] drm/i915/bdw: Handle context switch events Thomas Daniel
2014-08-14 20:13   ` Daniel Vetter
2014-08-14 20:17   ` Daniel Vetter
2014-08-14 20:28   ` Daniel Vetter
2014-08-14 20:37   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 32/43] drm/i915/bdw: Avoid non-lite-restore preemptions Thomas Daniel
2014-08-14 20:31   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 33/43] drm/i915/bdw: Help out the ctx switch interrupt handler Thomas Daniel
2014-08-14 20:43   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 34/43] drm/i915/bdw: Make sure gpu reset still works with Execlists Thomas Daniel
2014-08-01 14:42   ` Damien Lespiau
2014-08-06  9:26     ` Daniel, Thomas
2014-08-01 14:46   ` Damien Lespiau
2014-08-06  9:28     ` Daniel, Thomas
2014-07-24 16:04 ` [PATCH 35/43] drm/i915/bdw: Make sure error capture keeps working " Thomas Daniel
2014-08-15 12:14   ` Daniel Vetter
2014-08-21 10:57     ` Daniel, Thomas
2014-08-25 21:00       ` Daniel Vetter
2014-08-25 21:29       ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 36/43] drm/i915/bdw: Disable semaphores for Execlists Thomas Daniel
2014-07-24 16:04 ` [PATCH 37/43] drm/i915/bdw: Display execlists info in debugfs Thomas Daniel
2014-08-01 14:54   ` Damien Lespiau
2014-08-07 12:23   ` Thomas Daniel
2014-08-08 16:02     ` Damien Lespiau
2014-07-24 16:04 ` [PATCH 38/43] drm/i915/bdw: Display context backing obj & ringbuffer " Thomas Daniel
2014-07-24 16:04 ` [PATCH 39/43] drm/i915/bdw: Print context state " Thomas Daniel
2014-08-01 15:54   ` Damien Lespiau
2014-08-07 12:24   ` Thomas Daniel [this message]
2014-08-08 15:57     ` Damien Lespiau
2014-07-24 16:04 ` [PATCH 40/43] drm/i915/bdw: Document Logical Rings, LR contexts and Execlists Thomas Daniel
2014-08-15 12:42   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 41/43] drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists) Thomas Daniel
2014-08-18  8:33   ` Jani Nikula
2014-08-18 14:52     ` Daniel, Thomas
2014-07-24 16:04 ` [PATCH 42/43] drm/i915/bdw: Pin the context backing objects to GGTT on-demand Thomas Daniel
2014-08-15 13:03   ` Daniel Vetter
2014-07-24 16:04 ` [PATCH 43/43] drm/i915/bdw: Pin the ringbuffer backing object " Thomas Daniel
2014-07-25  8:35 ` [PATCH 00/43] Execlists v5 Daniel Vetter
2014-08-01 16:09 ` Damien Lespiau
2014-08-01 16:29   ` Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407414266-6095-1-git-send-email-thomas.daniel@intel.com \
    --to=thomas.daniel@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox