[PATCH 03/10] drm/i915: Update intel_dp_check_link_status() for Displayport compliance testing

[Todd Previte <tprevite@gmail.com>]

Move the DPCD read to the top and check for an interrupt from the sink to catch
Displayport automated testing requests necessary to support Displayport compliance
testing. The checks for active connectors and link status are moved below the
check for the interrupt.

Adds a check at the top to verify that the device is connected. This is necessary
for DP compliance testing to ensure that test requests are captured and acknowledged.
If a test request is present during a connected->disconnected transition,
the test code will attempt to execute even though the connection has been disabled,
resulting in a faied test.

Signed-off-by: Todd Previte <tprevite@gmail.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f7d4119..952dfa3 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4119,21 +4119,14 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 
 	WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
 
-	if (!intel_encoder->connectors_active)
-		return;
-
-	if (WARN_ON(!intel_encoder->base.crtc))
-		return;
-
-	if (!to_intel_crtc(intel_encoder->base.crtc)->active)
-		return;
-
-	/* Try to read receiver status if the link appears to be up */
-	if (!intel_dp_get_link_status(intel_dp, link_status)) {
+	/* Bail if not connected */
+	if (intel_dp->attached_connector->base.status !=
+	    connector_status_connected) {
+		DRM_DEBUG_KMS("Not connected\n");
 		return;
 	}
 
-	/* Now read the DPCD to see if it's actually running */
+	/* Attempt to read the DPCD */
 	if (!intel_dp_get_dpcd(intel_dp)) {
 		return;
 	}
@@ -4145,13 +4138,26 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				   DP_DEVICE_SERVICE_IRQ_VECTOR,
 				   sink_irq_vector);
-
 		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
 			intel_dp_handle_test_request(intel_dp);
 		if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
 			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
 	}
 
+	if (!intel_encoder->connectors_active)
+		return;
+
+	if (WARN_ON(!intel_encoder->base.crtc))
+		return;
+
+	if (!to_intel_crtc(intel_encoder->base.crtc)->active)
+		return;
+
+	/* Try to read receiver status if the link appears to be up */
+	if (!intel_dp_get_link_status(intel_dp, link_status)) {
+		return;
+	}
+
 	if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
 			      intel_encoder->base.name);
-- 
1.9.1