[PATCH 12/17] drm/i915: Update intel_dp_compute_config() to handle compliance test requests

[Todd Previte <tprevite@gmail.com>]

Adds provisions in intel_dp_compute_config() to accommodate compliance
testing. Mostly this invovles circumventing the automatic link configuration
parameters and allowing the compliance code to set those parameters as
required by the tests.

Signed-off-by: Todd Previte <tprevite@gmail.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2a13124..4a55ca6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1189,6 +1189,21 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	pipe_config->has_drrs = false;
 	pipe_config->has_audio = intel_dp->has_audio;
 
+	/* Compliance testing should skip most of this function */
+	if (!is_edp(intel_dp) && intel_dp->compliance_testing_active) {
+		bpp = intel_dp->compliance_config.bits_per_pixel;
+		lane_count = intel_dp->compliance_config.lane_count;
+		clock = intel_dp->compliance_config.link_rate >> 3;
+		/* Assign here and skip at the end - ensures correct values */
+		intel_dp->link_bw = bws[clock];
+		intel_dp->lane_count = lane_count;
+		pipe_config->pipe_bpp = bpp;
+		pipe_config->port_clock =
+			drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
+
+		goto compliance_exit;
+	}
+
 	if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
 		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
 				       adjusted_mode);
@@ -1275,6 +1290,7 @@ found:
 	DRM_DEBUG_KMS("DP link bw required %i available %i\n",
 		      mode_rate, link_avail);
 
+compliance_exit:
 	intel_link_compute_m_n(bpp, lane_count,
 			       adjusted_mode->crtc_clock,
 			       pipe_config->port_clock,
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx