[PATCH 03/17] drm/i915: Add a delay in Displayport AUX transactions for compliance testing

From: Todd Previte <tprevite@gmail.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 03/17] drm/i915: Add a delay in Displayport AUX transactions for compliance testing
Date: Wed, 10 Dec 2014 16:53:03 -0700	[thread overview]
Message-ID: <1418255597-4716-4-git-send-email-tprevite@gmail.com> (raw)
In-Reply-To: <1418255597-4716-1-git-send-email-tprevite@gmail.com>

The Displayport Link Layer Compliance Testing Specification 1.2 rev 1.1
specifies that repeated AUX transactions after a failure (no response /
invalid response) must have a minimum delay of 400us before the resend can
occur. Tests 4.2.1.1 and 4.2.1.2 are two tests that require this specifically.

V2:
- Changed udelay() to usleep_range()

Signed-off-by: Todd Previte <tprevite@gmail.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1b452cc..b6f5a72 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -876,9 +876,14 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 				   DP_AUX_CH_CTL_TIME_OUT_ERROR |
 				   DP_AUX_CH_CTL_RECEIVE_ERROR);
 
+			/* DP compliance requires 400us delay for errors
+			   and timeouts (DP CTS 1.2 Core Rev 1.1, 4.2.1.1
+			   & 4.2.1.2) */
 			if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
-				      DP_AUX_CH_CTL_RECEIVE_ERROR))
+				      DP_AUX_CH_CTL_RECEIVE_ERROR)) {
+				usleep_range(400, 500);
 				continue;
+			}
 			if (status & DP_AUX_CH_CTL_DONE)
 				break;
 		}
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
