[PATCH 1/3] drm/i915/skl: Determine SKL slice/subslice/EU info

[jeff.mcgee@intel.com]

From: Jeff McGee <jeff.mcgee@intel.com>

Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.

v2: Several small clean-ups suggested by Damien. Most notably,
    used smaller types for the new device info fields to reduce
    memory usage and improved the clarity/readability of the
    method used to extract attribute values from the fuse
    registers.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 30 +++++++++++++++
 drivers/gpu/drm/i915/i915_dma.c     | 73 +++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h     | 11 +++++-
 drivers/gpu/drm/i915/i915_reg.h     | 11 ++++++
 4 files changed, 124 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 164fa82..255054c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4370,6 +4370,35 @@ DEFINE_SIMPLE_ATTRIBUTE(i915_cache_sharing_fops,
 			i915_cache_sharing_get, i915_cache_sharing_set,
 			"%llu\n");
 
+static int i915_sseu_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+
+	if (INTEL_INFO(dev)->gen < 9)
+		return -ENODEV;
+
+	seq_puts(m, "SSEU Device Info\n");
+	seq_printf(m, "  Available Slice Total: %u\n",
+		   INTEL_INFO(dev)->slice_total);
+	seq_printf(m, "  Available Subslice Total: %u\n",
+		   INTEL_INFO(dev)->subslice_total);
+	seq_printf(m, "  Available Subslice Per Slice: %u\n",
+		   INTEL_INFO(dev)->subslice_per_slice);
+	seq_printf(m, "  Available EU Total: %u\n",
+		   INTEL_INFO(dev)->eu_total);
+	seq_printf(m, "  Available EU Per Subslice: %u\n",
+		   INTEL_INFO(dev)->eu_per_subslice);
+	seq_printf(m, "  Has Slice Power Gating: %s\n",
+		   yesno(INTEL_INFO(dev)->has_slice_pg));
+	seq_printf(m, "  Has Subslice Power Gating: %s\n",
+		   yesno(INTEL_INFO(dev)->has_subslice_pg));
+	seq_printf(m, "  Has EU Power Gating: %s\n",
+		   yesno(INTEL_INFO(dev)->has_eu_pg));
+
+	return 0;
+}
+
 static int i915_forcewake_open(struct inode *inode, struct file *file)
 {
 	struct drm_device *dev = inode->i_private;
@@ -4483,6 +4512,7 @@ static const struct drm_info_list i915_debugfs_list[] = {
 	{"i915_dp_mst_info", i915_dp_mst_info, 0},
 	{"i915_wa_registers", i915_wa_registers, 0},
 	{"i915_ddb_info", i915_ddb_info, 0},
+	{"i915_sseu_status", i915_sseu_status, 0},
 };
 #define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
 
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5804aa5..9a365b4 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -606,6 +606,7 @@ static void intel_device_info_runtime_init(struct drm_device *dev)
 		}
 	}
 
+	/* Initialize slice/subslice/EU info */
 	if (IS_CHERRYVIEW(dev)) {
 		u32 fuse, mask_eu;
 
@@ -615,7 +616,79 @@ static void intel_device_info_runtime_init(struct drm_device *dev)
 				  CHV_FGT_EU_DIS_SS1_R0_MASK |
 				  CHV_FGT_EU_DIS_SS1_R1_MASK);
 		info->eu_total = 16 - hweight32(mask_eu);
+	} else if (IS_SKYLAKE(dev)) {
+		const int s_max = 3, ss_max = 4, eu_max = 8;
+		int s, ss;
+		u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
+
+		fuse2 = I915_READ(GEN8_FUSE2);
+		s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
+			   GEN8_F2_S_ENA_SHIFT;
+		ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
+			     GEN9_F2_SS_DIS_SHIFT;
+
+		eu_disable[0] = I915_READ(GEN8_EU_DISABLE0);
+		eu_disable[1] = I915_READ(GEN8_EU_DISABLE1);
+		eu_disable[2] = I915_READ(GEN8_EU_DISABLE2);
+
+		info->slice_total = hweight32(s_enable);
+		/*
+		 * The subslice disable field is global, i.e. it applies
+		 * to each of the enabled slices.
+		*/
+		info->subslice_per_slice = ss_max - hweight32(ss_disable);
+		info->subslice_total = info->slice_total *
+				       info->subslice_per_slice;
+
+		/*
+		 * Iterate through enabled slices and subslices to
+		 * count the total enabled EU.
+		*/
+		for (s = 0; s < s_max; s++) {
+			if (!(s_enable & (0x1 << s)))
+				/* skip disabled slice */
+				continue;
+
+			for (ss = 0; ss < ss_max; ss++) {
+				if (ss_disable & (0x1 << ss))
+					/* skip disabled subslice */
+					continue;
+
+				info->eu_total += eu_max -
+						  hweight8(eu_disable[s] >>
+							   (ss * eu_max));
+			}
+		}
+
+		/*
+		 * SKL is expected to always have a uniform distribution
+		 * of EU across subslices with the exception that any one
+		 * EU in any one subslice may be fused off for die
+		 * recovery.
+		*/
+		info->eu_per_subslice = info->subslice_total ?
+					DIV_ROUND_UP(info->eu_total,
+						     info->subslice_total) : 0;
+		/*
+		 * SKL supports slice power gating on devices with more than
+		 * one slice, and supports EU power gating on devices with
+		 * more than one EU pair per subslice.
+		*/
+		info->has_slice_pg = (info->slice_total > 1) ? 1 : 0;
+		info->has_subslice_pg = 0;
+		info->has_eu_pg = (info->eu_per_subslice > 2) ? 1 : 0;
 	}
+	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
+	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
+	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
+	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
+	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
+	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
+			 info->has_slice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
+			 info->has_subslice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
+			 info->has_eu_pg ? "y" : "n");
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2dedd43..de07474 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -693,7 +693,16 @@ struct intel_device_info {
 	int trans_offsets[I915_MAX_TRANSCODERS];
 	int palette_offsets[I915_MAX_PIPES];
 	int cursor_offsets[I915_MAX_PIPES];
-	unsigned int eu_total;
+
+	/* Slice/subslice/EU info */
+	u8 slice_total;
+	u8 subslice_total;
+	u8 subslice_per_slice;
+	u8 eu_total;
+	u8 eu_per_subslice;
+	u8 has_slice_pg:1;
+	u8 has_subslice_pg:1;
+	u8 has_eu_pg:1;
 };
 
 #undef DEFINE_FLAG
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1dc91de..15914d7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1506,6 +1506,17 @@ enum skl_disp_power_wells {
 #define   CHV_FGT_EU_DIS_SS1_R1_SHIFT	28
 #define   CHV_FGT_EU_DIS_SS1_R1_MASK	(0xf << CHV_FGT_EU_DIS_SS1_R1_SHIFT)
 
+#define GEN8_FUSE2			0x9120
+#define   GEN8_F2_S_ENA_SHIFT		25
+#define   GEN8_F2_S_ENA_MASK		(0x7 << GEN8_F2_S_ENA_SHIFT)
+
+#define   GEN9_F2_SS_DIS_SHIFT		20
+#define   GEN9_F2_SS_DIS_MASK		(0xf << GEN9_F2_SS_DIS_SHIFT)
+
+#define GEN8_EU_DISABLE0		0x9134
+#define GEN8_EU_DISABLE1		0x9138
+#define GEN8_EU_DISABLE2		0x913c
+
 #define GEN6_BSD_SLEEP_PSMI_CONTROL	0x12050
 #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
 #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
-- 
2.2.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx