[PATCH 2/2] drm/i915/chv: Add CHV HW status to SSEU status

From: jeff.mcgee@intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/2] drm/i915/chv: Add CHV HW status to SSEU status
Date: Fri, 27 Feb 2015 10:22:32 -0800	[thread overview]
Message-ID: <1425061352-29188-3-git-send-email-jeff.mcgee@intel.com> (raw)
In-Reply-To: <1425061352-29188-1-git-send-email-jeff.mcgee@intel.com>

From: Jeff McGee <jeff.mcgee@intel.com>

Collect the currently enabled counts of slice, subslice, and
execution units using the power gate control ack message
registers specific to Cherryview.

Slice/subslice/EU info and hardware status can now be
determined for CHV, so allow the debugfs SSEU status dump
to proceed for CHV devices.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 31 +++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h     | 11 +++++++++++
 2 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 94b3984..e42e79a 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4362,7 +4362,7 @@ static int i915_sseu_status(struct seq_file *m, void *unused)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned int s_tot = 0, ss_tot = 0, ss_per = 0, eu_tot = 0, eu_per = 0;
 
-	if (INTEL_INFO(dev)->gen < 9)
+	if ((INTEL_INFO(dev)->gen < 8) || IS_BROADWELL(dev))
 		return -ENODEV;
 
 	seq_puts(m, "SSEU Device Info\n");
@@ -4384,7 +4384,34 @@ static int i915_sseu_status(struct seq_file *m, void *unused)
 		   yesno(INTEL_INFO(dev)->has_eu_pg));
 
 	seq_puts(m, "SSEU Device Status\n");
-	if (IS_SKYLAKE(dev)) {
+	if (IS_CHERRYVIEW(dev)) {
+		const int ss_max = 2;
+		int ss;
+		u32 sig1[ss_max], sig2[ss_max];
+
+		sig1[0] = I915_READ(CHV_POWER_SS0_SIG1);
+		sig1[1] = I915_READ(CHV_POWER_SS1_SIG1);
+		sig2[0] = I915_READ(CHV_POWER_SS0_SIG2);
+		sig2[1] = I915_READ(CHV_POWER_SS1_SIG2);
+
+		for (ss = 0; ss < ss_max; ss++) {
+			unsigned int eu_cnt;
+
+			if (sig1[ss] & CHV_SS_PG_ENABLE)
+				/* skip disabled subslice */
+				continue;
+
+			s_tot = 1;
+			ss_per++;
+			eu_cnt = ((sig1[ss] & CHV_EU08_PG_ENABLE) ? 0 : 2) +
+				 ((sig1[ss] & CHV_EU19_PG_ENABLE) ? 0 : 2) +
+				 ((sig1[ss] & CHV_EU210_PG_ENABLE) ? 0 : 2) +
+				 ((sig2[ss] & CHV_EU311_PG_ENABLE) ? 0 : 2);
+			eu_tot += eu_cnt;
+			eu_per = max(eu_per, eu_cnt);
+		}
+		ss_tot = ss_per;
+	} else if (IS_SKYLAKE(dev)) {
 		const int s_max = 3, ss_max = 4;
 		int s, ss;
 		u32 s_reg[s_max], eu_reg[2*s_max], eu_mask[2];
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a8b205d..659aefc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6227,6 +6227,17 @@ enum skl_disp_power_wells {
 #define   GEN6_RC6			3
 #define   GEN6_RC7			4
 
+#define CHV_POWER_SS0_SIG1		0xa720
+#define CHV_POWER_SS1_SIG1		0xa728
+#define   CHV_SS_PG_ENABLE		(1<<1)
+#define   CHV_EU08_PG_ENABLE		(1<<9)
+#define   CHV_EU19_PG_ENABLE		(1<<17)
+#define   CHV_EU210_PG_ENABLE		(1<<25)
+
+#define CHV_POWER_SS0_SIG2		0xa724
+#define CHV_POWER_SS1_SIG2		0xa72c
+#define   CHV_EU311_PG_ENABLE		(1<<1)
+
 #define GEN9_SLICE0_PGCTL_ACK		0x804c
 #define GEN9_SLICE1_PGCTL_ACK		0x8050
 #define GEN9_SLICE2_PGCTL_ACK		0x8054
-- 
2.3.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
